Cumulative influences of a small city and former mining activities on the sediment quality of a subtropical estuarine protected area

This study aimed to evaluate the sediment quality in the estuarine protected area known as Cananéia-Iguape-Peruíbe (CIP-PA), located on the southeastern coast of Brazil. The study was designed considering possible negative effects induced by the city of Cananéia on the sediment quality of surrounding areas. This evaluation was performed using chemical and ecotoxicological analyses. Sediments were predominantly sandy, with low CaCO₃ contents. Amounts of organic matter varied, but higher contents occurred closer to the city, as well as did Fe and Total Recoverable Oils and Greases (TROGs) concentrations. Contamination by Cd and Cu was revealed in some samples, while concentrations of Zn were considered low. Chronic toxicity was detected in all tested sediments and acute toxicity occurred only in sediments collected near the city. The principal component analysis (PCA) revealed an association among Cd, Cu, Fe, TROG, fines, organic matter, CaCO₃, and chronic toxicity, whereas acute toxicity was found to be associated with Zn and mud. However, because Zn levels were low, acute toxicity was likely due to a contaminant that was not measured. Results show that there is a broad area within the CIP-PA that is under the influence of mining activities (chronic toxicity, moderate contamination by metals), whereas poorer conditions occur closer to Cananéia (acute toxicity); thus, the urban area seems to constitute a relevant source of contaminants for the estuarine complex. These results show that contamination is already capable of producing risks for the local aquatic biota, which suggests that the CIP-PA effectiveness in protecting estuarine biota may be threatened.     

Risk assessment of trihalomethanes from tap water in Fortaleza, Brazil

The cancer risks (CR) by oral ingestion, dermal absorption, and inhalation exposure of trihalomethanes (THM) from tap water of ten districts in Fortaleza, Brazil were estimated. The mean levels of THM compounds were obtained in Fortaleza tap water as follow: 63.9 microg L(-1) for chloroform (CHCl(3)), 40.0 microg L(-1) for bromodichloromethane (CHBrCl(2)), and 15.6 microg L(-1) for dibromochloromethane (CHBr(2)Cl). Bromoform (CHBr(3)) was not detected. The mean CR for THMs in tap water is 3.96 x 10(-4). The results indicate that Fortaleza residents have a higher CR by inhalation than dermal absorption and oral ingestion. The CR for CHCl(3) contributes with 68% as compared with the total CR, followed by CHBrCl(2) (21%), and CHBr(2)Cl (11%). The hazard index (HI) is about ten times lower than unity, not indicating non-cancer effects.     

Nature conservation with reference to the state of Alagoas,Brazil

Summary This paper examines some problems concerning the present global environmental status, and looks at the principal concepts, aims and objectives of nature conservation. Reference is made to the State of Alagoas in Brazil in relation to its leading environmental problems and the government's efforts to address the situation. The main stumbling-blocks to conservation achievements in Alagoas are also explored.     

Uptake and transformation of phenol and chlorophenols by hairy root cultures of Daucus carota, Ipomoea batatas and Solanum aviculare

Hairy root cultures of Daucus carota L., Ipomoea batatas L. and Solanum aviculare Forst were investigated for their susceptibility to the highly toxic pollutants phenol and chlorophenols and for the involvement of inherent peroxidases in the removal of phenols from liquid media. Roots of D. carota grew normally in medium containing 1000 micromol l(-1) of phenol, whilst normal growth of roots of I. batatas and S. aviculare was only possible at levels up to 500 micromol l(-1). In the presence of chlorophenols, normal root growth was possible only in concentrations not exceeding 50 micromol l(-1), except for I. batatas which was severely affected at all concentrations. Despite the reduction in biomass, the growth of S. aviculare cultures was sustained in medium containing up to 2000 micromol l(-1) of phenol or 2-chlorophenol, and up to 500 micromol l(-1) of 2,6-dichlorophenol. The amounts of phenol removed by the roots within 72 h of treatment were 72.7%, 90.7% and 98.6% of the initial concentration for D. carota, I. batatas and S. aviculare, respectively. For the removal of 2,6-dichlorophenol the values were, respectively, 83.0%, 57.7% and 73.1%. Phenols labelled with 14C were absorbed by the root tissues and condensed with highly polar cellular substances as well as being incorporated into the cell walls or membranes. The results suggest that S. aviculare, an ornamental plant, would be best suited for remediation trials under field conditions.     

Effect of surfactants on Fenton's reagent-mediated degradation of Kraft black liquor

One of the limitations of the biodegradation of hydrophobic chemical compounds, like lignins, is their low solubility in the aqueous solution where this process takes place. To resolve this problem, surfactants have been used to improve the solubility of these hydrophobic compounds. In this investigation, we studied the effect of surfactants (anionic, cationic, and non-ionic) on the treatment of Kraft black liquor with Fenton's reagent. In the Fenton reaction, H2O2 (two different concentrations, 10 mM and 20 mM), FeCl2 (1 mM) and surfactant solution (10%) were used. Black liquor degradation was determined by UV/Visible spectrophotometry and by measuring phenolic groups. In the presence of Fenton's reagent, the optimum conditions for the oxidative degradation of black liquor were 10 mM H2O2, 1 microL of 10% solution of anionic surfactant (SDS). The importance of the use of surfactants for preparing black liquor for subsequent Fenton's reagent-mediated degradation was discussed.     

Efficient use of Fe metal as an electron transfer agent in a heterogeneous Fenton system based on Fe0/Fe3O4 composites

In this work a novel heterogeneous Fenton system based on Fe(0)/Fe3O4 composites is described. The composites with several Fe(0)/Fe3O4 ratios were prepared by two different methods, i.e. mechanical alloying of Fe(0) and Fe3O4 powders and controlled reduction of Fe3O4 with H2. Reaction studies and detailed Conversion Electron M?ssbauer surface characterization of the composites Fe(0)/Fe3O4, Fe(0), Fe3O4, alpha-Fe2O3 and gamma-Fe2O3 suggested that Fe2+surf species are essential to produce an active Fenton system. Kinetic studies for the oxidation of the dye methylene blue, used as an organic model molecule, and for the peroxide decomposition suggest that the reactions proceed via HO* radicals generated from Fe2+surf species and H2O2 in a Fenton like mechanism. The increase in activity caused by the addition of Fe(0) is discussed in terms of a creation of Fe2+surf species during the preparation of the composite and by an electron transfer mechanism from Fe(0) to Fe3+surf during the Fenton reaction to regenerate the Fe2+surf active species.     

Sustainability in manufacturing processes: practices performed in metal forming,casting, heat treatment,welding and electrostatic painting

ABSTRACT

This article aims to list the main sustainable practices developed in the processes of metal forming, casting, heat treatment, welding and electrostatic painting. When analysed the literature about sustainable manufacturing, a predominance of studies about machining is observed and the processes mentioned are few explored in academic studies. The research strategy used to reach the objective was systematic literature review, conducted for each process cited. Many sustainable practices were identified with prominence of better materials use and energy efficiency. The authors of this article believe that the information presented here can be useful for researches in their future studies and for industry professionals interested in improving manufacturing processes.     

Management of urban solid waste: Vermicomposting a sustainable option

Solid waste management is a worldwide problem and it is becoming more and more complicated day by day due to rise in population, industrialization as well as changes in our life style. Presently most of the waste generated is either disposed of in an open dump in developing countries or in landfills in the developed ones. Landfilling as well as open dumping requires lot of land mass and could also result in several environmental problems. Land application of urban/municipal solid waste (MSW) can be carried out as it is rich in organic matter and contains significant amount of recyclable plant nutrients. The presence of heavy metals and different toxics substances restricts its land use without processing. Vermicomposting of MSW, prior to land application may be a sustainable waste management option, as the vermicast obtained at the end of vermicomposting process is rich in plant nutrients and is devoid of pathogenic organism. Utilization of vermicast produced from urban/municipal solid waste in agriculture will facilitate in growth of countries economy by lowering the consumption of inorganic fertilizer and avoiding land degradation problem. Vermicomposting of urban/MSW can be an excellent practice, as it will be helpful in recycling valuable plant nutrients. This review deals with various aspects of vermicomposting of MSW.     

In Situ Monitoring of the Mutagenic Effects of the Gaseous Emissions of a Solid Waste Incinerator in Metropolitan São Paulo,Brazil, Using the Tradescantia Stamen-Hair Assay

ABSTRACT

The present work was designed to determine the potential genotoxicity at the vicinity of a solid waste incinerator in the metropolitan area of Sâo Paulo, using the Tradescantia stamen-hair bioassay. Experiments were carried out between December 1998 and April 1999 in four regions (40 pots of plants per site) selected on the basis of their pollution levels predicted by theoretical modeling of the dispersion of the incinerator's plume. The exposure sites were defined as follows: highest level (incinerator); a high level (museum) located 1.5 km from the emission point; a moderate level (school, at a distance of 3.5 km from the incinerator); and a control (at Jaguariuna countryside). The difference in genotoxicity among the groups was statistically significant (p < 0.001). The frequency of mutations observed in the countryside was significantly lower [2.25 ± 1.55, mean ± SD (standard deviation)] than that of the sites close to the incinerator. The frequency of mutations measured at the school (3.70 ± 1.36) was significantly lower than that measured at both the museum (4.89 ± 1.12) and the incinerator (5.69 ± 1.34). In conclusion, we found a positive correlation between the spatial distribution of the emissions of the incinerator located in an urban area and the mutagenic events measured by the Tradescantia stamen-hair assay. The in situ approach employed in this study was simple, efficient, and of low cost. No air or chemical extraction of pollutants was necessary for genotoxicity testing as required by other assays.