Analysing urban expansion and land use suitability for the city of Kahramanmaraş, Turkey, and its surrounding region

This study aimed at quantifying changes in urban area of the city of Kahramanmara? (K.Mara?) between 1948 and 2006, and analysing suitability of existing land use (LU) to the land potential. Urban change information was derived from two black-white monoscopic aerial photographs, and IKONOS and the QuickBird images acquired in 1948, 1985, 2000 and 2006, respectively. QuickBird image and soil map with 1:25,000 scale were used to analyze suitability of the current LU pattern to the land potential. The findings showed that the urban area of K.Mara? has expanded approximately 13 times during the past six decades. According to current LU and the soil map, productive and moderately productive soils were largely (73.2%) allocated for agricultural activities, which means that there was a strong consistency between the agricultural LU type and the land capability. However, widespread agriculture on the non-productive soils, and urbanization on the fertile agricultural lands were assessed as unsuitable from sustainable LU viewpoint. Considering this phenomenon, it is possible to say that rapid urban expansion has a growing pressure on the fertile agricultural soils. Monitoring LU changes, particularly urbanization, and developing effective LU plans based on the land capability were determined as the most important approaches to encourage sustainable use of land.     

Indoor and outdoor radon measurements at lung cancer patients’ homes in the dwellings of Rize Province in Turkey

In this study, indoor and outdoor radon (²²²Rn) surveys were carried out in the summer and winter seasons in homes of one hundred lung cancer patients in the year 2013–2014. The aim was to investigate the relationship between radon and cancer patients. Lung cancer patients completed a questionnaire concerning their living environment, various physical parameters and living habits. Pearson correlation and t tests revealed no meaningful results between radon concentrations, on one hand, and environmental and personal living habits, on the other hand. Consequently, the BEIR VI model was adapted and ²²²Rn exposure was estimated to be responsible for about 12% of the lung cancer incidences in the winter season and around 5% in the summer season in the Rize Province. However, due to the limited number of data and numerous parameters that could lead to lung cancer, the estimations done with the model should be taken very lightly. The annual effective doses due to inhalation of indoor and outdoor ²²²Rn were estimated to be, respectively, 1.43 and 0.94 mSv y^?1. The indoor and outdoor annual effective doses were, respectively, close and below the world annual effective dose (1.3 mSv y^?1). At the district level, the indoor annual effective dose equivalent in the ?yidere district was 4.52 mSv y^?1, which was 3.5 times greater than the world average. The number of patients in the majority of the houses in this district was more than one.     

The sensitive and selective determination of aluminium by spectrofluorimetric detection after complexation with N-o-vanillidine-2-amino-p-cresol

A simple, easy to use and selective spectrofluorimetric method for the determination of trace levels of aluminium has been developed. A new Schiff base, N-o-vanillidine-2-amino-p-cresol (OVAC), has been synthesized and its fluorescence activity with aluminium investigated. Based on this chelation reaction, a spectrofluorimetric method has been developed for the determination of aluminium in samples buffered at pH 4.0 using acetic acid-sodium acetate. The chelation reaction between Al(iii) and N-o-vanillidine-2-amino-p-cresol was very fast, requiring only 20 min at room temperature to complex completely. The excitation and emission wavelengths were 423.0 and 553.0 nm, respectively, at which the OVAC-Al complex gave the maximum fluorescence intensity at pH 4.0 in a 50% ethanol-50% water medium. The interference from fluoride ions was minimized by the addition of Be(2+). Other ions were found not to interfere at the concentrations likely to be found in natural waters. Under these conditions, the calibration plot was linear up to 1000 microg L(-1) (r = 0.999). The limit of detection (3sigma) for the determination of Al(iii) was 0.19 microg L(-1) and the precision for multiple determinations of 3 ng mL(-1) Al(iii) prepared in ultra-pure water was found to be 0.29% (n = 16). The Schiff base ligand could be used to determine ultra-trace aluminium from natural waters. Analysis of environmental certified reference materials showed good agreement with the certified values. The procedure was found to be equally applicable to both fresh water and saline solutions (including sea water) using either normal external calibration or the standard additions method.     

Evaluation of industrial waste black cumin (Nigella Sativa) for biohydrogen production without pretreatment

Environment, Development and Sustainability - The depletion of fossil fuels and the fact that fossil fuels pollute the environment accelerated the trend toward environmentally friendly energy...     

Chemometric evaluation for the relation of BCR sequential extraction method and in vitro gastro-intestinal method for the assessment of metal bioavailability in contaminated soils in Turkey

Introduction  

A chemometric evaluation has been done to classify metal ions in soils and to determine whether or not the gastric and intestinal phases of a physiologically based extraction test bear any relation to any of the phases of the four-stage Community Bureau of Reference (BCR) extraction protocol.     

Use of carbonised beet pulp carbon for removal of Remazol Turquoise Blue-G 133 from aqueous solution

Carbonised beet pulp (BPC) produced from agricultural solid waste by-product in sugar industry was used as adsorbent for the removal of Remazol Turquoise Blue-G 133 (RTB-G 133) dye in this study. The kinetics and equilibrium of sorption process were investigated with respect to pH, temperature and initial dye concentration. Adsorption studies with real textile wastewater were also performed. The results showed that adsorption was a strongly pH-dependent process, and optimum pH was determined as 1.0. The maximum dye adsorption capacity was obtained as 47.0 mg g^?1at the temperature of 25 °C at this pH value. The Freundlich and Langmuir adsorption models were used for describing the adsorption equilibrium data of the dye, and isotherm constants were evaluated depending on sorption temperature. Equilibrium data of RTB-G 133 sorption fitted very well to the Freundlich isotherm. Mass transfer and kinetic models were applied to the experimental data to examine the mechanisms of adsorption and potential rate-controlling steps. It was found that both external mass transfer and intra-particle diffusion played an important role in the adsorption mechanisms of dye and adsorption kinetics followed the pseudo second-order type kinetic model. The thermodynamic analysis indicated that the sorption process was exothermic and spontaneous in nature.     

Analysing and mapping spatial and temporal dynamics of urban traffic noise pollution: a case study in Kahramanmaraş, Turkey

This study aimed at quantifying noise pollution from urban traffic in the city of Kahramanmara?, Turkey. A total of 114 measurements for the equivalent noise level (L _Aeq) were made at 38 urban locations classified as “residential areas”, “residential and commercial areas” and “industrial areas” according to the national regulations, during morning, mid-day and evening hours. Our findings tabulated and mapped revealed that mean noise level in “residential and commercial areas” was highest relative to the other land-use types. Minimum and maximum values of noise pollution were recorded during the mid-day and evening hours, regardless of the land-use types. Noise limit values were exceeded at two locations only out of 38 based on the national regulation criteria and at over half of the locations based on the international criteria.     

Macro- and microelement contents of some legume seeds

Macro- and microelement contents of legume seeds were determined by ICP-AES. The potassium K contents of seeds ranged between 7,426 mg/kg (Lupinus albus L.) and 16,558 mg/kg (Phaseolus vulgaris L. ssp. sphaericus Mart). In addition, while P contents of seeds changed from 2,719 mg/kg (L. albus L.) to 5,792 mg/kg (Vigna sinensis (L.) Savi), Ca contents ranged at the levels between 1,309 mg/kg (Cicer arietinum L.) and 2,781 mg/kg (L. albus L.). The microelement contents of samples were found to be different depending on several species. The iron levels of samples were determined at the levels between 90.51 mg/kg (Phaseolus mungo L.) and 152.80 mg/kg (P. vulgaris L. ssp. sphaericus Mart). In addition, Zn contents of seeds were found between 31.32 mg/kg (C. arietinum L.) and 44.75 mg/kg (V. sinensis (L.) Savi).     

Heavy metals intake by cultured mushrooms growing in model system

Micro element and heavy metal contents of mushrooms were determined by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). It was seen an increase in the heavy metal contents (except Cu and Zn) of the mushrooms until the second dose. A decrease was seen in heavy metal intake of the mushroom in the application of the third dose. The highest accumulation occurred from the upper soils treated with the second dose. Amounts of Cd, Cr, Cu, Pb and Zn, which were accumulated in the mushroom after the application of this dose, were detected as 5.7, 23.1, 75.7, 62.8 and 99.3 ppm, respectively.     

Water quality assessment and meta model development in Melen watershed – Turkey

Istanbul, being one of the highly populated metropolitan areas of the world, has been facing water scarcity since the past decade. Water transfer from Melen Watershed was considered as the most feasible option to supply water to Istanbul due to its high water potential and relatively less degraded water quality. This study consists of two parts. In the first part, water quality data covering 26 parameters from 5 monitoring stations were analyzed and assessed due to the requirements of the “Quality Required of Surface Water Intended for the Abstraction of Drinking Water” regulation. In the second part, a one-dimensional stream water quality model with simple water quality kinetics was developed. It formed a basic design for more advanced water quality models for the watershed. The reason for assessing the water quality data and developing a model was to provide information for decision making on preliminary actions to prevent any further deterioration of existing water quality. According to the water quality assessment at the water abstraction point, Melen River has relatively poor water quality with regard to NH₄⁺, BOD₅, faecal streptococcus, manganese and phenol parameters, and is unsuitable for drinking water abstraction in terms of COD, PO₄^3?, total coliform, total suspended solids, mercury and total chromium parameters. The results derived from the model were found to be consistent with the water quality assessment. It also showed that relatively high inorganic nitrogen and phosphorus concentrations along the streams are related to diffuse nutrient loads that should be managed together with municipal and industrial wastewaters.