Contribution of canopy leaching to sulphate deposition in a Scots pine forest

Radioactive sulphate (35SO4) was applied to the soil below a Scots pine forest on 23 June 1989, and its movement into the canopy and into throughfall and stemflow was measured over 4 months. The specific activity, Bq (mg S)(-1), of the canopy increased monotonically; uptake by current-year (1989) expanding needles was initially twice as fast as by older needles or live twigs. By 10 October the canopy average specific activity was 62 Bq (mg S)(-1). The specific activity of net throughfall (throughfall + stemflow - rain), deduced from measurements from six throughfall collectors, six stemflow collectors and two rain collectors, fell rapidly from 12.6 Bq (mg S)(-1) in late July to <1 Bq (mg S)(-1) in mid-August. The results suggest (assuming rapid equilibration of 35S with sulphate in soil) that root-derived sulphate contributed c. 3% of sulphate in net throughfall and that dry deposition of SO2 and sulphate particles contributed c. 97% of the 0.56 g S m(-2) measured in net throughfall over the period. Simultaneous measurements of SO2 at canopy height and of NH3 above and within the canopy gave mean concentrations of 5.9 and 0.86 microg m(-3), respectively, sufficient to account for the sulphate measured in net throughfall only if codeposition of NH3 and SO2 occurred to canopy surfaces. The large values of specific activity observed in July, however, indicate that throughfall composition may be closely related to recent soil input of sulphate, and that equilibrium cannot be safely assumed. The possibility of a significant contribution of soil-derived sulphate to sulphate deposition in net throughfall cannot be ruled out on the basis of this experiment.     

Chromium speciation and fractionation in ground and surface waters in the vicinity of chromite ore processing residue disposal sites

Chromium concentrations of up to 91 mg l(-1) were found by ICP-OES for ground water from nine boreholes at four landfill sites in an area of S.E. Glasgow/S. Lanarkshire where high-lime chromite ore processing residue (COPR) from a local chemical works had been deposited from 1830 to 1968. Surface water concentrations of up to 6.7 mg l(-1) in a local tributary stream fell to 0.11 mg l(-1) in the River Clyde. Two independent techniques of complexation/colorimetry and speciated isotope dilution mass spectrometry (SIDMS) showed that Cr was predominantly (>90%) in hexavalent form (CrVI) as CrO4(2-), as anticipated at the high pH (7.5-12.5) of the sites. Some differences between the implied and directly determined concentrations of dissolved CrIII, however, appeared related to the total organic carbon (TOC) content. This was most significant for the ground water from one borehole that had the highest TOC concentration of 300 mg l(-1) and at which < 3% of Cr was in the form of CrVI. Subsequent ultrafiltration produced significant decreases in Cr concentration with decreasing size fractions, e.g. <0.45 microm, < 100 kDa, <30 kDa and < 1 kDa by the tangential-flow method. As this appeared related more to concentrations of humic substances than of TOC per se, horizontal bed gel electrophoresis of freeze-dried ultrafilter retentates was carried out to further characterise the CrIII-organic complex. This showed for the main Cr-containing fraction, 100 kDa-0.45 microm, that the Cr was associated with a dark brown band characteristic of organic (humic) matter. Comparison of gel electrophoresis and FTIR results for ultrafilter retentates of ground water from this borehole with those for a borehole at another site where CrVI predominated suggested the influence of carboxylate groups, both in reducing CrVI and in forming soluble CrIII-humic complexes. The implications of this for remediation strategies (especially those based on the addition of organic matter) designed to reduce highly mobile and carcinogenic Cr(VI)O4(2-) to the much less harmful CrIII as insoluble Cr(OH)3 are discussed.     

Dystrophin protein and rflp analyis for fetal diagnosis and carrier confirmation of duchenne muscular dystrophy

A pregnant woman with indeterminate Duchenne muscular dystrophy (DMD) carrier status, but with DMD diagnosed in her deceased brother (unavailable for study), presented for prenatal diagnosis, intending to continue the pregnancy only if proven unaffected with DMD with near absolute certainty. Creatine kinase (CK) assays to clarify carrier status were inconclusive. Male sex in the fetus was identified, but DNA restriction fragment length polymorphism (RFLP) analysis was not yet available to this centre to investigate the possible transmission of the DMD gene, and the pregnancy was terminated. Tissue histology and dystrophin protein analysis demonstrated the absence of DMD. In a situation with proven maternal carrier status, future fetal inheritance of the opposite maternal X chromosome would indicate the presence of DMD. However, maternal carrier status remained in doubt through a second pregnancy, even with RFLP studies, and was finally established when dystrophin analysis confirmed the presence of DMD in the second fetus. Histologic findings are presented, contrasting features in the two fetuses. The value of dystrophin analysis for establishing the diagnosis of fetal DMD, in this case proving maternal carrier status in a difficult situation, and for demonstrating DMD gene:RFLP haplotype relationships is illustrated.     

Cattle feedlot soil moisture and manure content: I. Impacts on greenhouse gases, odor compounds, nitrogen losses, and dust

Beef cattle feedlots face serious environmental challenges associated with manure management, including greenhouse gas, odor, NH3, and dust emissions. Conditions affecting emissions are poorly characterized, but likely relate to the variability of feedlot surface moisture and manure contents, which affect microbial processes. Odor compounds, greenhouse gases, nitrogen losses, and dust potential were monitored at six moisture contents (0.11, 0.25, 0.43, 0.67, 1.00, and 1.50 g H2O g(-1) dry matter [DM]) in three artificial feedlot soil mixtures containing 50, 250, and 750 g manure kg(-1) total (manure + soil) DM over a two-week period. Moisture addition produced three microbial metabolisms: inactive, aerobic, and fermentative at low, moderate, and high moisture, respectively. Manure content acted to modulate the effect of moisture and enhanced some microbial processes. Greenhouse gas (CO2, N2O, and CH4) emissions were dynamic at moderate to high moisture. Malodorous volatile fatty acid (VFA) compounds did not accumulate in any treatments, but their persistence and volatility varied depending on pH and aerobic metabolism. Starch was the dominant substrate fueling both aerobic and fermentative metabolism. Nitrogen losses were observed in all metabolically active treatments; however, there was evidence for limited microbial nitrogen uptake. Finally, potential dust production was observed below defined moisture thresholds, which were related to manure content of the soil. Managing feedlot surface moisture within a narrow moisture range (0.2-0.4 g H2O g(-1) DM) and minimizing the accumulation of manure produced the optimum conditions that minimized the environmental impact from cattle feedlot production.     

Cattle feedlot soil moisture and manure content: II. Impact on Escherichia coli O157

The moisture and manure contents of soils at cattle feedlot surfaces vary spatiotemporally and likely are important factors in the persistence of Escherichia coli O157 in these soils. The impacts of water content (0.11-1.50 g H2O g(-1) dry feedlot surface material [FSM]) and manure level (5, 25, and 75% dry manure in dry FSM) on E. coli O157:H7 in feedlot soils were evaluated. Generally, E. coli O157:H7 numbers either persisted or increased at all but the lowest moisture levels examined. Manure content modulated the effect of water on E. coli growth; for example, at water content of 0.43 g H2O g(-1) dry FSM and 25% manure, E. coli O157:H7 increased by 2 log10 colony forming units (CFU) g(-1) dry FSM in 3 d, while at 0.43 g H2O g(-1) dry FSM and 75% manure, populations remained stable over 14 d. Escherichia coli and coliform populations responded similarly. In a second study, the impacts of cycling moisture levels and different drying rates on naturally occurring E. coli O157 in feedlot soils were examined. Low initial levels of E. coli O157 were reduced to below enumerable levels by 21 d, but indigenous E. coli populations persisted at >2.50 log10 CFU g(-1) dry FSM up to 133 d. We conclude that E. coli O157 can persist and may even grow in feedlot soils, over a wide range of water and manure contents. Further investigations are needed to determine if these variables can be manipulated to reduce this pathogen in cattle and the feedlot environment.     

Dynamics of leaf litter and soil respiration in a complex multistrata agroforestry system,Pernambuco, Brazil

High litter inputs in agroforestry systems contribute to soil microbial activity, soil fertility and productivity. Considering that the cycling of organic matter is essential to the maintenance of physical–chemical and microbiological properties of the soil, the aims of this work were to estimate the production, accumulation and decomposition of litter, and assess soil microbial respiration in a complex multistrata agroforestry system located in the north-east of Brazil. This agroforestry system has three strata formed by forest and fruit trees and species of multiple uses. During 3 years (2011–2013), leaf litter was sampled monthly to account for litterfall and quarterly to account for litter accumulation. The rates of litter decomposition were estimated using the ratio produced-to-accumulated litter, and the correlation between litter fall and rainfall was calculated. Precipitation data were provided by the water and climate agency of Pernambuco (APAC). Soil samples (0–15 cm) were also taken quarterly, simultaneously with the litter accumulation samples, and soil microbial respiration was assessed using the capture, by a KOH solution, of the evolved CO₂. The annual production of leaf litter was stable in the 3 years of study in this agroforestry system, and the monthly input of litter to the soil was influenced by rainfall, being higher in the dry seasons. The accumulated litter on the ground was constant, as was microbial activity (respiration) through time. The estimated litter decomposition rates were 1.49 (first year), 1.33 (second year) and 1.42 (third year), being considered rapid rates of decomposition. This guarantees (to the farmer) that this system is capable of maintaining soil fertility and eliminates the need for chemical fertilizers.     

An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

While many studies and reviews into the practices conducted by industry and academia to recycle and remanufacture carbon fibre-reinforced plastic (CFRP) exist, to date no investigation exists which regards the correctness of the use of the terms recycling and remanufacturing. As such, this paper seeks to analyse the CFRP reuse industry’s attempt to recycle and remanufacture manufacturing waste CFRP and end-of-life (EOL) CFRP with an emphasis on the terminology used to describe these practices. Firstly, this paper presents a justification of the importance of using EOL terminology correctly; outlining the benefits and problems associated with using the correct and incorrect terminology. This paper finds that in the case of CFRP remanufacturing, terminology is being applied incorrectly and in the case of CFRP recycling, particular care should be taken when applying the term recycled to CFRP or stating that CFRP has been recycled. Further, this paper proposes new terminology (in keeping with EU directives) which could be adopted by industry and academia working in this area. This paper also finds that in the case of remanufacture, CFRP is incapable of being remanufactured.     

Molecular tools for bathing water assessment in Europe: Balancing social science research with a rapidly developing environmental science evidence-base

The use of molecular tools, principally qPCR, versus traditional culture-based methods for quantifying microbial parameters (e.g., Fecal Indicator Organisms) in bathing waters generates considerable ongoing debate at the science–policy interface. Advances in science have allowed the development and application of molecular biological methods for rapid (~2 h) quantification of microbial pollution in bathing and recreational waters. In contrast, culture-based methods can take between 18 and 96 h for sample processing. Thus, molecular tools offer an opportunity to provide a more meaningful statement of microbial risk to water-users by providing near-real-time information enabling potentially more informed decision-making with regard to water-based activities. However, complementary studies concerning the potential costs and benefits of adopting rapid methods as a regulatory tool are in short supply. We report on findings from an international Working Group that examined the breadth of social impacts, challenges, and research opportunities associated with the application of molecular tools to bathing water regulations.     

Critical problems associated with climate change: a systematic review and meta-analysis of Philippine fisheries research

Environmental Science and Pollution Research - This paper proposes to analyze the scientific production on climate change and fisheries in the Philippine context. This research theme was chosen...     

Characterization and Properties of Hydrophilic Cellulose Acetate Propionate Derivative

The chemical modification of Acrylamidomethyl Cellulose Acetate Propionate (AMCAP) was carried out by radical addition of acrylic acid. The structural modification was confirmed with the aid of FTIR, MS and NMR techniques. Thermal properties of hydrophilic cellulose derivative (AMCAP–H₂O₂) such as glass transition (T_g 153 °C) and thermal stability (372.7 °C) were determined by DSC and TGA techniques, respectively. These thermal properties confirmed the introduction of carboxylic groups into AMCAP structure, which causes an impact in their properties. The AMCAP–H₂O₂ shows minor contact angle compared to AMCAP, giving a more hydrophilic characteristic, due to acrylic acid addition into the side chains of AMCAP polymer.