Hg concentrations and stable isotope variations in tropical fish species of a gold-mining-impacted watershed in French Guiana

Environmental Science and Pollution Research - The aim of the study was to determine if gold-mining activities could impact the mercury (Hg) concentrations and isotopic signatures in freshwater...     

Modeling effects of traffic and landscape characteristics on ambient nitrogen dioxide levels in Connecticut

An integrated exposure model was developed that estimates nitrogen dioxide (NO(2)) concentration at residences using geographic information systems (GIS) and variables derived within residential buffers representing traffic volume and landscape characteristics including land use, population density and elevation. Multiple measurements of NO(2) taken outside of 985 residences in Connecticut were used to develop the model. A second set of 120 outdoor NO(2) measurements as well as cross-validation were used to validate the model. The model suggests that approximately 67% of the variation in NO(2) levels can be explained by: traffic and land use primarily within 2 km of a residence; population density; elevation; and time of year. Potential benefits of this model for health effects research include improved spatial estimations of traffic-related pollutant exposure and reduced need for extensive pollutant measurements. The model, which could be calibrated and applied in areas other than Connecticut, has importance as a tool for exposure estimation in epidemiological studies of traffic-related air pollution.     

Soil amendments, plant age, and intercropping impact p,p'-DDE bioavailability to Cucurbita pepo

Field experiments were conducted to optimize the phytoextraction of weathered p,p'-DDE (p,p'-dichlorodiphenyldichloroethylene) by Cucurbita subspecies. The effects of two soil amendments, mycorrhizae or a biosurfactant, on p,p'-DDE accumulation was determined. Also, p,p'-DDE uptake was assessed during plant growth (12, 26, 38, and 62 d), and cultivars that accumulate weathered p,p'-DDE were intercropped with cultivars known not to have that ability. Cucurbita pepo L. ssp. pepo accumulated large amounts of the contaminant, having stem bioconcentration factors, amounts of p,p'-DDE translocated, and contaminant phytoextraction that were 14, 9.9, and 5.0 times greater than C. pepo L. ssp. ovifera (L.) D.S. Decker, respectively. During 62 d, the stem BCF (bioconcentration factor) for p,p'-DDE in subspecies pepo remained constant and the total amount of contaminant accumulated was correlated with plant biomass (r(2) = 0.86). For subspecies ovifera, the stem BCF was highest at 12 d (1.5) but decreased to 0.39 by 62 d, and p,p'-DDE removal was not correlated with plant biomass. Mycorrhizal inoculation increased p,p'-DDE accumulation by both subspecies by an average 4.4 times. For subspecies pepo, mycorrhizae increased the percentage of contaminant extracted from 0.72 to 2.1%. Biosurfactant amendment also enhanced contaminant accumulation by both subspecies, although treatment reduced subspecies ovifera biomass by 60%. The biosurfactant had no effect on the biomass of subspecies pepo, increased the average contaminant concentration by 3.6-fold, and doubled the overall amount of p,p'-DDE removed from the soil. Soil amendments that enhance the mobility of weathered persistent organic pollutants will significantly increase the amount of contaminant phytoextraction by Cucurbita pepo.     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

Dust emission calculations in open storage piles protected by means of barriers, CFD and experimental tests

The importance of open mineral storage piles in bulk solids port terminals have increased considerably in recent years in Europe and USA (in Spain, great extensions of transoceanic ports are being made) to address the increasing demand of raw material importation due to local mining operation closure. These storage piles are affected by the climatologically processes and the dust emission to the atmosphere, causing repercussions to health and environmental, which is intimately related to the air velocity, according to USEPA studies, maximum ratio of dust emission emitted from CFD and software Ansys CFX 10.0 is determined. In addition, an emission variability study based on the pile distance of different height solid barriers is developed, reducing the emission to 66%. The studies have been contrasted by published investigations and industrial measurement.     

Characterization of a military training site containing 232Thorium

Understanding contaminant distribution is critical to selection and implementation of effective and affordable containment and remediation efforts. This article describes the characterization of soil containing thorium at a training site on Kirtland Air Force Base, Albuquerque, NM. The site has been used by the Defense Nuclear Weapons School since the early 1960's to train personnel in emergency response to nuclear weapons accidents and for characterization and containment of radioactive contamination. The purpose of work reported herein is to describe the primary location and migration pattern of 232Thorium (232Th) and 232Th progeny (decay products) at the site. Soil containing thorium oxide (ThO2) was applied to the site for approximately 30 years (early 1960-1990) and was used to simulate a plutonium release from a nuclear weapons accident. Data presented indicate that surface 232Th and 232Th progeny at approximately 5 times background levels are approaching test site boundaries. However, the data also indicate that vertical migration has not exceeded 0.9 m because of the insoluble nature of ThO2. The major mechanisms of 232Th mobility appear to be surface migration mediated by precipitation runoff and wind-blown soil.     

Accumulation of weathered polycyclic aromatic hydrocarbons (PAHs) by plant and earthworm species

Experiments were conducted to assess the bioavailability of polyclycic aromatic hydrocarbons (PAHs) in soil from a Manufactured Gas Plant site. Three plant species were cultivated for four consecutive growing cycles (28 days each) in soil contaminated with 36.3 microg/g total PAH. During the first growth period, Cucurbita pepo ssp. pepo (zucchini) tissues contained significantly greater quantities of PAHs than did Cucumis sativus (cucumber) and Cucurbita pepo ssp. ovifera (squash). During the first growth cycle, zucchini plants accumulated up to 5.47 times more total PAH than did the other plants, including up to three orders of magnitude greater levels of the six ring PAHs. Over growth cycles 2-4, PAH accumulation by zucchini decreased by 85%, whereas the uptake of the contaminants by cucumber and squash remained relatively constant. Over all four growth cycles, the removal of PAHs by zucchini was still twice that of the other species. Two earthworm species accumulated significantly different amounts of PAH from the soil; Eisenia foetida and Lumbricus terrestris contained 0.204 and 0.084 microg/g total PAH, respectively, but neither species accumulated measurable quantities 5 or 6 ring PAHs. Lastly, in abiotic desorption experiments with an aqueous phase of synthetically prepared organic acid solutions, the release of 3 and 4 ring PAHs from soil was unaffected by the treatments but the desorption of 5-6 ring constituents was increased by up to two orders of magnitude. The data show that not only is the accumulation of weathered PAHs species-specific but also that the bioavailability of individual PAH constituents is highly variable.     

Mechanisms of thorium migration in a semiarid soil

Thorium concentrations at Kirtland Air Force Base training sites in Albuquerque, NM, have been previously described; however, the mechanisms of thorium migration were not fully understood. This work describes the processes affecting thorium mobility in this semiarid soil, which has implications for future remedial action. Aqueous extraction and filtration experiments have demonstrated the colloidal nature of thorium in the soil, due in part to the low solubility of thorium oxide. Colloidal material was defined as that removed by a 0.22-microm or smaller filter after being filtered to nominally dissolved size (0.45 microm). Additionally, association of thorium with natural organic matter is suggested by micro- and ultrafiltration methods, and electrokinetic data, which indicate thorium migration as a negatively charged particle or anionic complex with organic matter. Soil fractionation and digestion experiments show a bimodal distribution of thorium in the largest and smallest size fractions, most likely associated with detrital plant material and inorganic oxide particles, respectively. Plant uptake studies suggest this could also be a mode of thorium migration as plants grown in thorium-containing soil had a higher thorium concentration than those in control soils. Soil erosion laboratory experiments with wind and surface water overflow were performed to determine bulk soil material movement as a possible mechanism of mobility. Information from these experiments is being used to determine viable soil stabilization techniques at the site to maintain a usable training facility with minimal environmental impact.     

Prediction of particulate air pollution from a landfill site using CFD and LIDAR techniques

Landfill sites have been the most common way of eliminating solid urban waste, as well as that of public and mining wastes. Landfill sites are a constant source of environmental pollution and wind is the most important contributing factor to air pollution, due to the erosion which it produces over the landfill site surfaces, transporting dust away from the source point. This causes serious risks for human health and general dirt in the surrounding areas of the landfill site. The result of dust air pollution produced in a landfill site is analysed through CFD3D (Computational Fluid Dynamics) by joining the LIDAR (Light Detection and Ranging) technique and Ansys CFX 10.0 software. The CFD simulations determine the wind velocity distribution on the landfill site surface and the different particle threshold friction velocities which determine the dust emission in multiphase simulations (air-particles). These simulations are validated from field data obtained in three measurement programmes for each type of landfill site surface treatment which has been studied. It was determined that the superficial landfill site treatment with the lowest air pollution is tall grass and bushes. The methodology used can be applied to the dust emission calculation in the design or evaluation of other landfill sites.     

Electrolytic transformation of ordinance related compounds (ORCs) in groundwater: laboratory mass balance studies

Electrolytic reactive barriers (e(-) barriers) consist of closely spaced permeable electrodes installed across a groundwater contaminant plume in a permeable reactive barrier format. Application of sufficient potential to the electrodes results in sequential oxidation and reduction of the target contaminant. The objective of this study was to quantify the mass distribution of compounds produced during sequential electrolytic oxidation and reduction of ordinance related compounds (ORCs) in a laboratory analog to an e(-) barrier. In this study, a series of column tests were conducted using RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine) and TNT (2,4,6-trinitrotoluene) as representative ORCs. The experimental setup consisted of a plexiglass column packed with quartz-feldspar sand to simulate aquifer conditions. A single set of porous electrodes consisting of expanded titanium-mixed metal oxide mesh was placed at the midpoint of the sand column as a one-dimensional analog to an e(-) barrier. Constant current of 20mA (variable voltage) was applied to the electrode set. Initial studies involved quantification of reaction products using unlabeled RDX and TNT. Approximately 70% of the influent concentration was transformed, in one pass, through sequential oxidation-reduction for both contaminants. Following the unlabeled studies, (14)C labeled RDX and TNT were introduced to determine the mass balance. An activity balance of up to 96% was achieved for both (14)C-RDX and (14)C-TNT. For both contaminants, approximately 21% of the influent activity was mineralized to (14)CO(2). The proportion of the initial activity in the dissolved fraction was different for the two test contaminants. Approximately 30% of the initial (14)C-RDX was recovered as unreacted in the dissolved phase. The balance of the (14)C-RDX was recovered as non-volatile, non-nitroso transformation products. None of the (14)C-RDX was sorbed to the column sand packing. For (14)C-TNT approximately 51% of the initial activity was recovered in the dissolved phase, the majority was unreacted TNT. The balance of the (14)C-TNT was either sorbed to the sand packing (approximately 24%) or dissolved/mineralized as unidentified ring cleavage products ( approximately 4%).