Community air monitoring for pesticides. Part 1: selecting pesticides and a community

The CA Department of Pesticide Regulation (CDPR) developed methods to select pesticides and a community to fulfill criteria for an ambient air monitoring study it conducted as part of the CA Environmental Protection Agency's Environmental Justice Action Plan. Using a scoring system, CDPR evaluated 100 pesticides based on statewide-reported pesticide use, volatility, and priority in CDPR's risk assessment process (indicators of exposure and toxicity) to produce a list of pesticides to consider as candidates for monitoring. The CDPR also evaluated and scored 83 communities based on demographics and health factors, availability of cumulative impacts data, and reported pesticide use to create a list of community candidates. The scores provide relative rankings to distinguish more highly impacted communities from less impacted ones and to identify which pesticides might contribute most to potential adverse health effects. These methods use criteria that can be quantified, validated, and verified in order to provide a transparent and fair selection process. Based on public comments and highest scores, CDPR recommended 40 pesticides (including some of their degradation products) and one community for its yearlong monitoring study. The CDPR then further refined its list of pesticides by soliciting input from local and technical advisory groups. The CDPR plans to use these methods to select pesticides and communities in future monitoring activities.     

Measurement of Volatile Organics at Part per Billion Concentrations Using a Cold Trap Inlet and High Speed Gas Chromatography

Direct inlet gas chromatography (GC) is becoming one of the most frequently used techniques for measurement of volatile organics in air. Although GC is an effective tool, its usefulness as a field method can be limited by retention times of several minutes or more, and by the limits of detection. In order to address these issues, a high speed GC system featuring a capillary cold trap inlet and variable speed electrometeramplifier was developed and tested.

The gas cooled inlet was used to collect and focus organic vapors from injection volumes of up to 1 ml. Resistance heating of the metal cold trap produced a narrow injection band that allowed simple separations to be completed in 5 to 20 seconds. Use of a variable speed electrometer-amplifier allowed the response time and noise suppression characteristics to be adjusted to the needs of the specific analysis.

Simple mixtures of organics including aromatics, alkanes and chlorinated hydrocarbons were separated in 20 seconds or less. The limits of detection for 13 test compounds ranged from less than 1 part per billion by volume (ppbv) to about 50 ppbv. Data presented here indicate that high speed GC using a cold trap inlet may be a feasible approach for near real-time measurement of volatile organics in ambient air.     

Estimating Maximum Concentrations for Open Path Monitoring Along a Fixed Beam Path

ABSTRACT

Researchers have applied open path optical sensing techniques to a variety of workplace and environmental monitoring problems. Usually these data are reported in terms of a path-average (or path-integrated) concentration. When assessing potential human exposures along a beam path, this path-average value is not always informative, since concentrations along the path can vary substantially from the beam average. The focus of this research is to arrive at a method for estimating the upper-bound in contaminant concentrations over a fixed open beam path. The approach taken here uses a statistical model to estimate an upper-bound concentration based on a combination of the path-average and a measure of the spatial variability computed from point samples along the beam path. Results of computer simulations and experimental testing in a controlled ventilation chamber indicate that the model produced conservative estimates for the maximum concentration along the beam path. This approach may have many applications for open path monitoring in workplaces or wherever maximum concentrations are a concern.     

Solubilization and methanogenesis of a particulate industrial waste: Impact of solids loading and temperature

Effective anaerobic treatment of particulate wastes requires solubilization and acid formation prior to methanogenesis. In this case study of a particulate waste from a corn-processing industry, the influence of solids loading in solubilization, acid formation and methanogenesis was studied under mesophilic (35°C) and thermophilic (60°C) conditions. The waste was concentrated by centrifugation to initial suspended solids concentrations (TSS_i) of 150 to 350 g/L (15% to 35%). Anaerobic batch tests were conducted for 20 days, and significant solubilization of the particulate organic matter occurred in all cases. The thermophilic systems were more effective than the mesophilic systems with respect to solubilization of particulates, volatile solids destruction, acetic acid uptake, and methane generation. Methanogenesis appreared to be a rate-limiting step at higher TSS_i values, indicated by accumulation of volatile organic acids in the batch systems. Slower rates of methane production led to identification of the limiting solids loading for both temperature regimes. The results of this study can be used to evaluate the limitations of a single stage system for anaerobic treatment of organic particulate industrial wastes.     

Batch tests on mineral deposit formation due to co-mingling of leachates derived from municipal solid wastes and waste-to-energy combustion residues

Deposit formation in leachate collection systems can be problematic for landfill operations. Deposits from municipal solid waste (MSW) derived leachates are impacted by microbial activity and biofilm development, whereas leachates generated from co-disposal of MSW with combustion residues (CR) from waste-to-energy (WTE) facilities and other mineral-rich waste materials are more prone to forming dense mineral deposits dominated by calcium carbonate. In this study, leachates from laboratory lysimeters containing either WTE-CR or shredded MSW were mixed at different volumetric ratios. The mixed leachates were incubated for 5 weeks in batch tests to evaluate the potential for formation of precipitates. Although mineral precipitates have been reported to form in landfills with no co-disposal practices, in this study mineral precipitates did not form in either the WTE-CR derived leachate or the MSW derived leachate, but formed in all leachate mixtures. Mineral precipitates consisted of calcium carbonate particles, with the highest yield from a 1:1 combination of the WTE-CR derived leachate mixed with the MSW derived leachate. The introduction of gaseous carbon dioxide or air into WTE-CR derived leachate resulted in the production of particles of similar chemical composition but different morphology. Operation of landfills to prevent co-mingling of mineral-rich leachates with microbially active leachates and/or to control leachate exposure to sources of carbon dioxide may help to prevent this type of precipitate formation in leachate collection systems.     

Interaction of Temperature,Humidity, Driver Preferences,and Refrigerant Type on Air Conditioning Compressor Usage

ABSTRACT

Recent studies have shown large increases in vehicle emissions when the air conditioner (AC) compressor is engaged. Factors that affect the compressor-on percentage can have a significant impact on vehicle emissions and can also lead to prediction errors in current emissions models if not accounted for properly. During 1996 and 1997, the University of California, Riverside, College of Engineering-Center for Environmental Research and Technology (CE-CERT) conducted a vehicle activity study for the California Air Resources Board (CARB) in the Sacramento, CA, region. The vehicles were randomly selected from all registered vehicles in the region. As part of this study, ten vehicles were instrumented to collect AC compressor on/off data on a second-by-second basis in the summer of 1997. Temperature and humidity data were obtained and averaged on an hourly basis. The ten drivers were asked to complete a short survey about AC operational preferences. This paper examines the effects of temperature, humidity, refrigerant type, and driver preferences on air conditioning compressor activity.

Overall, AC was in use in 69.1% of the trips monitored. The compressor was on an average of 64% of the time during the trips. The personal preference settings had a significant effect on the AC compressor-on percentage but did not interact with temperature. The refrigerant types, however, exhibited a differential response across temperature, which may necessitate separate modeling of the R12 refrigerant-equipped vehicles from the R134A-equipped vehicles. It should be noted that some older vehicles do get retrofitted with new compressors that use R134A; however, none of the vehicles in this study had been retrofitted.     

Evaluation of the persistence of micropollutants through pure-oxygen activated sludge nitrification and denitrification.

The persistence of pharmaceuticals, hormones, and household and industrial chemicals through a pure-oxygen activated sludge, nitrification, denitrification wastewater treatment facility was evaluated. Of the 125 micropollutants that were tested in this study, 55 compounds were detected in the untreated wastewater, and 27 compounds were detected in the disinfected effluent. The persistent compounds included surfactants, fire-retardant chemicals, pesticides, fragrance compounds, hormones, and one pharmaceutical. Physical-chemical properties of micropollutants that affected partitioning onto wastewater solids included vapor pressure and octanol-water partition coefficients.     

Congenital myotonic dystrophy: An often unsuspected cause of severe polyhydramnios

Two cases of severe polyhydramnios are presented in which the unsuspected diagnosis of myotonic dystrophy was made in the patient and the fetus.     

Tropospheric sources of NOx: lightning and biology.

Laboratory experiments to quantify the global production of NOx (NO + NO2) in the troposphere due to atmospheric lightning and biogenic activity in soil are presented. These laboratory experiments, as well as other studies, suggest that the global production of NOx by lightning probably ranges between 2 and 20 MT(N)y-1 of NO and is strongly dependent on the total energy deposited by lightning, a quantity not well-known. In our laboratory experiments, nitrifying micro-organisms is soil were found to be a significant source of both NO and nitrous oxide (N2O). The measured production ratio of NO to N2O averaged 2-3 for oxygen partial pressures of 0.5-10%. Extrapolating these laboratory measurements to the global scale, which is somewhat risky, suggests that nitrifying micro-organisms in soil may account for as much as 10 MT(N) y-1 of NO. Additional experiments with denitrifying micro-organisms gave an NO to N2O production ratio ranging from 2 to 4 for an oxygen partial pressure of 0.5% and a ratio of less than unity for oxygen partial pressures ranging from 1 to 20%. The production of NO and N2O, normalized with respect to micro-organism number indicates that the production of both NO and N2O by denitrifying micro-organisms is at least an order of magnitude less than production by nitrifying micro-organisms for the micro-organisms studied.