Acid rain in Asia

Acid rain has been an issue of great concern in North America and Europe during the past several decades. However, due to the passage of a number of recent regulations, most notably the Clean Air Act in the United States in 1990, there is an emerging perception that the problem in these Western nations is nearing solution. The situation in the developing world, particularly in Asia, is much bleaker. Given the policies of many Asian nations to achieve levels of development comparable with the industrialized world—which necessitate a significant expansion of energy consumption (most derived from indigenous coal reserves)—the potential for the formation of, and damage from, acid deposition in these developing countries is very high. This article delineates and assesses the emissions patterns, meteorology, physical geology, and biological and cultural resources present in various Asian nations. Based on this analysis and the risk factors to acidification, it is concluded that a number of areas in Asia are currently vulnerable to acid rain. These regions include Japan, North and South Korea, southern China, and the mountainous portions of Southeast Asia and southwestern India. Furthermore, with accelerated development (and its attendant increase in energy use and production of emissions of acid deposition precursors) in many nations of Asia, it is likely that other regions will also be affected by acidification in the near future. Based on the results of this overview, it is clear that acid deposition has significant potential to impact the Asian region. However, empirical evidence is urgently needed to confirm this and to provide early warning of increases in the magnitude and spread of acid deposition and its effects throughout this part of the world.     

Measurement of soil radioactivity levels and radiation hazard assessment in southern Rechna interfluvial region, Pakistan

Rechna interfluvial region is one of the main regions of Punjab, Pakistan. It is the area which is lying between River Ravi and River Chenab, alluvial-filled. Radioactivity levels in soil samples, collected from southern Rechna interfluvial region, Pakistan, have been estimated by using gamma-ray spectrometric technique. ²²⁶Ra, ²³²Th, the primordial radionuclide ⁴⁰K, and the artificial radionuclide ¹³⁷Cs have been measured in the soil of the study area. The mean radioactivity levels of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs were found to be 50.6 ± 1.7, 62.3 ± 3.2, 662.2 ± 32.1, and 3.1 ± 0.3 Bq kg^???1, respectively. The mean radium equivalent activity (Ra_eq), outdoor radiation hazard index (H _out), indoor radiation hazard index (H _in), and terrestrial absorbed dose rate for the area under study were determined as 190.8 ± 8.7 Bq kg^???1, 0.52, 0.65, and 69.8 nGy h^???1, respectively. The annual effective dose to the general public was found to be 0.43 mSv. This value lies well below the limit of 1 mSv for general public as recommended by the International Commission on Radiological Protection. The measured values are comparable with other global radioactivity measurements and are found to be safe for the public and the environment.     

Laboratory scale studies on removal of chromium from industrial wastes

Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes,paint pigments,manufacturing units etc.Chromium exists in aqueous systems in both trivalent(Cr^3 )and hexavalent (Cr^6 )forms.The hexavalent form is carcinogenic and toxic to aquatic life,whereas Cr^3 is however comparatively less toxic.This study was undertaken to investigate the total chromium removal from industial effluents by chemical means in order to achieve the Pakistan NEQS level of 1 mg/L by the methods of reduction and precipitation.The study was conducted in four phase Ⅰ,the optimum pH and cost effective reducing agent among the four popular commercial chemicals was selected.As a result,pH of 2 was found to be most suitable and sodium meta bisulfate was found to be the most cost effective reducing agent respectively.Phase Ⅱ showed that lower dose of sodium meta hisulfate was sufficient to obtain 100% efficiency in reducing Cr^6 to Cr^3 ,and it was noted that reaction time had no significance in the whole process.A design curve for reduction process was established which can act as a tool for treatment of industrial effluents.Phase Ⅲ studies indicated the best pH was 8.5 for precipitation of Cr^3 to chromium hydroxide by using lime.An efficiency of 100% was achievable and a settling time of 30 minutes produced clear effluent.Finally in Phase Ⅳ actual waste samples from chrome tanning and electroplating industries,when precipitated at pH of 12 gave 100% efficiency at a settling time of 30 minutes and confirmed that chemical means of reduction and precipitation is a feasible and viable solution for treating chromium wastes from industries.     

Driver's obesity and road crash risks in the United States

Objective: We assessed obesity trends in U.S. drivers involved in fatal crashes since 1999 and distinguished whether crash risk factors were different between obese and nonobese drivers.

Methods: We included only drivers of passenger cars involved in fatal traffic crashes between January 1, 1999, and December 31, 2012. Obesity was classified according to the World Health Organization guidelines and profiled between 1999 and 2012 using the adjusted prevalence ratio (aPR) from log-binomial regression models. Differences in crash risks (e.g., driver's fatality, drunk driving, seat belt nonuse) between obese and nonobese drivers were estimated as adjusted odds ratios (aORs) using logistic regression models.

Results: A total of 753,024 U.S. drivers were involved in fatal crashes, for which obesity information was available for 534,887. About 56% (n = 299,078) were driving passenger cars. The prevalence of class I obesity increased from 10% in 1999 to 14% in 2012 (aPR = 1.50, 95% confidence interval [CI], 1.42–1.58), class II obesity from 3 to 5% (aPR = 2.22, 95% CI, 2.05–3.01), and class III obesity from 1 to 2% (aPR = 2.65; 95% CI, 2.27–3.10). Compared to nonobese controls, obese drivers had significantly higher risks for fatality (1.10 ≤ aOR ≤ 1.47), seat belt nonuse (1.00 ≤ aOR ≤ 1.21), need for extrication (1.01 ≤ aOR ≤ 1.23), and ambulance transport time ≥30 min (1.01 ≤ aOR ≤ 1.28). Compared to nonobese controls, obese drivers were less likely to drink drive (0.41 ≤ aOR ≤ 0.72) or speed >65 mph (0.78 ≤ aOR ≤ 0.93).

Conclusion: The rising national prevalence of obesity extends to U.S. drivers involved in fatal crashes and indicates the need to improve seat belt use, vehicle design, and postcrash care for this vulnerable population.     

Does low N-mineralisation rate in soils under grass help limit nitrate leaching in summer?

This paper aimed to confirm the hypothesis that rates of ammonification and net mineral-N production in soils under grass in summer are low and this, rather than nitrate uptake by plants, reduces mineral leaching from soils in summer. Six sets of soil samples were collected from under mown grass on the University of York campus in the UK. Samples were taken from two depths in late summer (August) and late autumn (November) to compare seasonal differences in N species transformations when field-moist soils were incubated for a week at ambient outdoor temperatures after prior removal of vegetation. Ammonification and net mineral-N production rates were low in August in spite of warm temperatures. Net mineral-N production rates were also low in November. The results agreed with those of an earlier study in a different year after considering weather differences between years. They support the hypothesis that litter accumulated over autumn/winter will be minimally mineralised and retain N before the temperature rises in spring. The study shows the merit of measuring concentrations of mineral-N species in both fresh soils and soils incubated at ambient outdoor temperatures after removing plant material to eliminate plant N uptake effects. The results suggest that soil C% and N% are more important than soil C:N ratio alone in understanding controls on N transformations.     

Modelling above- and below-ground mass loss and N dynamics in wooden dowels (LIDET) placed across North and Central America biomes at the decadal time scale

This article focuses on modelling above and below-ground mass loss and nitrogen (N) dynamics based on the wooden dowels (Gonystylus bancanus [Miq.] Kurz) of the decadal Long-term Intersite Decomposition Experiment (LIDET) data. These dowels were placed at 27 locations across North and Central America, involving tropical, temperate and boreal forests, grasslands, wetlands and the tundra. The dowel, inserted vertically into the soil with one half remaining exposed to the air, revealed fast mass and N losses under warm to humid conditions, and slow losses under wet as well as cold to dry conditions. The model formulation, referred to as the Wood Decomposition Model, or WDM, related these losses to (i) mean annual precipitation, mean monthly January and July air temperatures, and (ii) mean annual actual evapotranspiration (AET) at each location. The resulting calibrations conformed well to the time-in-field averages for mass remaining by location: R² = 0.83 and 0.90 for the lower and upper parts, respectively. These values dropped, respectively, to 0.41 and 0.55 for the N concentrations, and to 0.28 and 0.43 for N remaining. These reductions likely refer to error propagation and to as yet unresolved variations in N transference into and out of the wood specific to each individual dowel location. Recalibrating the model parameters by ecosystem type reduced the R² values for actual versus best-fitted mass loss by about 0.15. Doing the same without location- or ecosystem-specific adjustments reduced the R² values further, by about 0.3.     

Amelioration of toxicopathological effects of cadmium with silymarin and milk thistle in male Japanese quail (Coturnix japonica)

Environmental Science and Pollution Research - Cadmium is an important widely distributed heavy metal in the environment due to its several industrial uses, while milk thistle is an important herb...     

Analysis of soil characteristics of different land uses and metal bioaccumulation in wheat grown around rivers: possible human health risk assessment

The present study was conducted to determine the physico-chemical properties and heavy metal contents in soils under three land uses (agricultural, riverbank and roadside) from areas situated around rivers (Beas and Sutlej) in Punjab, India. Heavy metal contents in wheat samples (grain and fodder) growing in the area were also analyzed in order to find out potential human health risk through wheat consumption. The studied soils under the three land uses were found to be basic in nature with sandy texture, low soil organic matter and other soil nutrients. Comparatively higher amounts of soil nutrients were observed in soils under agricultural land use as compared to riverbank and roadside land uses. The amounts of heavy metals (Cr, Cu, Co and Pb) analyzed in soils were lower than the various national and international maximum permissible limits, but heavy metal contents observed in wheat fodder samples exceeded the maximum permissible limits for fodder. The soil-to-plant metal bioaccumulation factor was found to be highest for Cu (3.812 for soil–wheat grain and 1.874 for soil–wheat fodder), which showed the bioaccumulation of heavy metals from soils to crops, and the wheat straw-to-grain translocation factor was found to be highest for Co (4.375). The hazard index calculated to assess non-carcinogenic health risks was found above 1 for children, meaning that the wheat grains can pose health risks to children.     

Drainage affects tree growth and C and N dynamics in a minerotrophic peatland

The lowering of the water table resulting from peatland drainage may dramatically alter C and N cycling in peatland ecosystems, which contain one-third of the total terrestrial C. In this study, tree annual ring width and C (delta(13)C) and N (delta(15)N) isotope ratios in soil and plant tissues (tree foliage, growth rings, and understory foliage) in a black spruce-tamarack (Picea mariana-Larix laricina) mixed-wood forest were examined to study the effects of drainage on tree growth and C and N dynamics in a minerotrophic peatland in west-central Alberta, Canada. Drainage increased the delta(15)N of soil NH4+ from a range of +0.6% per hundred to +2.9% per hundred to a range of +4.6% per hundred to +7.0% per hundred most likely through increased nitrification following enhanced mineralization. Plant uptake of 15N-enriched NH4+ in the drained treatment resulted in higher plant delta15N (+0.8% per hundred to +1.8% per hundred in the drained plots and -3.9% per hundred to -5.4% per hundred in the undrained plots), and deposition of litterfall N enriched with 15N increased the delta15N of total soil N in the surface layer in the drained (+2.9% per hundred) as compared with that in the undrained plots (+0.6% per hundred). The effect of drainage on foliar delta(13)C was species-specific, i.e., only tamarack showed a considerably less negative foliar delta(13)C in the drained (-28.1% per hundred) than in the undrained plots (-29.1% per hundred), indicating improved water use efficiency (WUE) by drainage. Tree ring area increments were significantly increased following drainage, and delta(13)C and delta(15)N in tree growth rings of both species showed responses to drainage retrospectively. Tree-ring delta(13)C data suggested that drainage improved WUE of both species, with a greater and more prolonged response in tamarack than in black spruce. Our results indicate that drainage caused the studied minerotrophic peatland to become a more open ecosystem in terms of C and N cycling and loss. The effects of forested peatland drainage or drying on C and N balances deserve further research in order to better understand their roles in future global change.     

Adsorptive removal of direct dyes by PEI-treated peanut husk biomass: Box–Behnken experimental design

This paper reports the application of Box-Behnken experimental design to illustrate the adsorption of direct dyes (Indosol Black NF and Indosol Orange RSN) using polyethyleneimine (PEI)-treated peanut husk biomass. The effect of three independent variables (initial dyes concentration, biosorbent dose and pH) was investigated during the study. Maximum biosorption capacity (141 and 98.2 mg/g) of PEI-pretreated biomass was achieved with 200 mg/L initial dye concentration and 0.05 g/50 mL biomass dose for Indosol Black NF and Indosol Orange RSN, respectively. Acidic pH was found to be favourable for maximum dyes removal. Characterisation of biosorbent was carried out through Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy, thermogravimetric analysis (TGA) and point of zero charge determination. FT-IR analyses confirmed the involvement of carboxylic and carbonyl groups. The desorption study was also conducted to check out the possibility of regeneration of dyes and adsorbent and it was found that 51.58 and 76.6% of Indosol Black NF and Indosol Orange RSN, respectively, can be desorbed from the loaded biosorbent by using 1 M NaOH solution. The results indicated that PEI-treated peanut husk biomass can be used as an efficient biosorbent for the removal of Indosol Black NF and Indosol Orange RSN dyes from aqueous solutions.