Particulate matter concentration levels during intense haze event in an urban environment

This study assessed concentration levels of particulate matter (PM) in the ambient environment of Ilorin metropolis, Nigeria, during haze episodes. Meteorological data (wind speed and direction, rainfall data, sunshine data, relative humidity and temperature) were obtained. Aerocet 531S particle counter (MetOne Instruments, USA) was used to measure four mass concentration ranges of PM (PM_1.0, PM_2.5, PM₁₀ and the total suspended particles (TSP)) in 10 locations taking into consideration land use patterns. Surfer® version 8 (Golden Software LLC, USA) was used to model the spatial variation of particulate matter concentration levels using kriging interpolation griding method. Human exposure assessment was done using the total respiratory deposition dose (TRDD) estimates and statutory limit breach (SLB) approaches. The appearance of dominating weak southern atmospheric wind flow was observed as wind speed ranged from 0 to 6.811 m/s while solar radiation periods ranged from 0.3 to 3.5 h/day. The relative humidity of the metropolis ranged between 28 and 57%, while daily temperature was 15 to 36 °C. Highest concentration levels of PM measured were 73.4, 562.7, 7066.3 and 9907.8 μg/m³ for PM_1.0, PM_2.5, PM₁₀ and TSP, respectively. Very strong negative correlations existed between the PM concentration levels and microclimatic parameters. Spatial variation of the concentration level as modelled using Surfer® version 8 indicated that particulate concentration level increases from south to north. Concentration levels of PM for the 24-h averaging period were generally above the 24-h threshold limit value set by the regulatory agencies for all the locations.     

A Survey of Trace Metals in Vegetation, Soil and Lower Animal Along Some Selected Major Roads in Metropolitan City of Lagos

The concentration of trace metals (Cd, Cu, Pb and Zn) in a total of 144 samples of grass, soil and lower animal (earthworm, Lybrodrilus violaceous) were collected and analysed for their metallic content. Levels of cadmium ranged from 0.01–0.07 g g^–1; 0.01–0.12 g g^–1 and from trace–0.05 g g^–1 dry weight for plant, soil and animal samples respectively. Mean concentration of copper ranged 0.10–1.48 g g^–1; 0.10–2.90 g g^–1 and 0.01–0.08 g g^–1 for samples in similar order as above. The levels of Pb varied from 0.01–0.14 g g^–1; 0.02–0.23 g g^–1 and from trace–0.07 g g^–1 while that of Zn ranged from 0.19–1.80 g g^–1; 0.51–3.35 g g^–1and 0.01–0.08 g g^–1 also in the same order of samples as mentioned above. Levels of metals in soil samples were higher than the background levels with the exception of Zn but lower than European Union (EU) limits. The results generally revealed the presence of metals in plant and animal samples and metal dynamics up the food chain is highly possible. Acceptable recoveries of the spiking experiment validate the experimental protocol.     

Levels of organochlorine pesticide residues in marine-, surface-, ground- and drinking waters from the Eastern Cape Province of South Africa

Persistent organochlorine pesticides (OCPs) such as DDT and its metabolites (DDDs and DDEs). chlordane, hexachlorobenzene (HCB), heptachlor and endosulfan were determined in drinking-, ground-, surface- and marine waters from the Eastern Cape Province of South Africa. Percentage recoveries of the OCPs from spiked river water ranged from 71.03 +/- 8.15% (dieldrin) to 101.25 +/- 2.17% (alpha-BHC). The levels of OCPs ranged from 5.5 ng/L (2,4-DDD) to 160 ng/L (HCB) in the water samples. Some endocrine disrupting OCPs such as DDT, DDE, heptachlor, endosulfan and chlordane were detected.     

Distribution and potential sources of polycyclic aromatic hydrocarbons in soils around coal-fired power plants in South Africa

The distribution and potential sources of 15 polycyclic aromatic hydrocarbons (PAHs) in soils in the vicinity of three South African coal-fired power plants were determined by gas chromatography–mass spectrometry. PAH compound ratios such as phenanthrene/phenanthrene + anthracene (Phen/Phen + Anth) were used to provide reliable estimation of emission sources. The total PAH concentration in the soils around three power plants ranged from 9.73 to 61.24 μg g^?1, a range above the Agency for Toxic Substances and Disease Registry levels of 1.0 μg g^?1 for significantly contaminated site. Calculated values of Phen/Phen + Anth ratio were 0.48?±?0.08, 0.44?±?0.05, and 0.38?+?0.04 for Matla, Lethabo, and Rooiwal, respectively. Flouranthene/fluoranthene + pyrene (Flan/Flan + Pyr) were found to be 0.49?±?0.03 for Matla, 0.44?±?0.05 for Lethabo, and 0.53?±?0.08 for Rooiwal. Such values indicate a pyrolytic source of PAHs. Higher molecular weight PAHs (five to six rings) were predominant, suggesting coal combustion sources. A good correlation existed between most of the PAHs implying that these compounds were emitted from similar sources. The carcinogenic potency B[a]P equivalent concentration (B[a] Peq) at the three power plants ranged from 3.61 to 25.25 indicating a high carcinogenic burden. The highest (B[a] Peq) was found in samples collected around Matla power station. It can therefore be concluded that the soils were contaminated with PAHs originating from coal-fired power stations.     

Effectiveness of dust dispersion in the 20-L Siwek chamber

The Siwek 20-L chamber is widely used throughout the world to evaluate the explosibility of dusts. This research evaluated the quality of dust dispersion in the Siwek 20-L chamber using Pittsburgh coal, Gilsonite, and purple K dusts. A Pittsburgh Research Laboratory (PRL) optical dust probe was used to measure optical transmittance through the dust cloud at various locations within the chamber. A total of 540 tests were performed, with triplicate tests at five nominal dust concentrations and six locations. The two standard dispersion nozzles (rebound and perforated annular nozzle) were compared. The transmissions corresponding to the normal ignition delay period were used to: (a) determine variations in spatial uniformity of dispersion obtained with both nozzles; (b) make comparisons between the experimental transmission data and those calculated from theory for the three dusts; and (c) make comparisons with transmission data measured in the PRL 20-L and Fike 1-m³ dust explosion chambers.The uniformity of dispersion for the three dusts was similar with both nozzles, despite the differences in nozzle geometry and mode of operation. Transmission data of the three dusts were all significantly lower than those calculated from theory. This was discovered to be, in part, due to significant reduction in particle size that occurred during dispersion. By measuring particle sizes before and after dispersion, values of 60%, 50%, and 20% reduction in particle size (based on the surface-weighted mean diameter) were obtained for Pittsburgh coal, Gilsonite, and purple K, respectively. Transmission data from the PRL 20-L, Fike 1-m³ and the Siwek 20-L chambers indicated comparable results in terms of uniformity of dispersion. However, transmission data from the Siwek 20-L chamber were significantly lower than those of the PRL and Fike chambers. Again, this was attributed, in part, to the significant reduction in particle size that occurred during dispersion in the Siwek chamber. The design of the outlet (dispersion) valve of the Siwek 20-L apparatus charge vessel was largely responsible for the particle break-up. The contribution to particle break-up by the dispersion nozzles and the high level of turbulence in the chamber were found to be minimal. This is a significant finding in that the dust particle size tested for explosibility in the Siwek chamber is considerably smaller than the original dust sample.     

Optimization of activated carbon production from empty fruit bunch fibers in one-step steam pyrolysis for cadmium removal from aqueous solution

The fast growth of the palm oil industry in Malaysia is associated with various waste products, namely the empty fruit bunches (EFB), which have a negative impact on the environment. Therefore, these wastes were utilized as a cheap raw material for the production of activated carbon (AC) with less energy consumption. One-step steam pyrolysis was used to produce AC from oil palm empty fruit bunch fibers (EFBF) by varying the operating parameters of temperature, steam flow rate, and activation time using two-level full factorial experimental design (FFD). Ten samples of AC were prepared and the optimized production conditions were chosen based on the ability to adsorb and remove cadmium. Physical activation comprised of carbonization for 30 min using nitrogen gas (N₂), followed by activation with steam at different flow rates (2.0, 3.0, and 4.0 ml/min), temperatures (600, 750, and 900°C) and times (15, 30, and 45 min). The AC sample produced at an activation temperature of 900°C with a steam flow rate of 2.0 ml/min and activation time of 15 min was selected as the best adsorbent with a total yield of 21.7%. It had adsorbed more than 97% of total cadmium from aqueous solution within 2 min of the contact time. Characterization of EFBF-based AC by SEM and BET surface area analysis had shown a good-quality adsorbent with highly active sites and well-developed pores with BET surface area of 635.16 m²/g. Experimental results indicated that the prepared AC from EFBF provide a promising solution in water and wastewater treatment.     

Anatomical changes,osmolytes accumulation and distribution in the native plants growing on Pb-contaminated sites

Environmental Geochemistry and Health - Native plants growing on heavy-metal-contaminated sites are the potential candidates for phytoremediation of contaminated sites due to their tolerance and...     

The evolving sedentary lifestyle among nomadic pastoralists in the humid zone of Nigeria: implications for land-use policy

SUMMARY

The humid zone of Nigeria has traditionally been considered unsuitable for extensive cattle production because of the prevalence of tsetse fly. Over the years, nomadic pastoralists, mainly Fulani, from the northern part of the country paid seasonal visits to this zone in search of pasture and water for their cattle during the dry season when the threat of the tsetse menace is less. The recent increase in the number of settled pastoralists has been associated with changing trends in the ecology and economy of the zone.

Relying on recent survey data, this paper attempts a systematic analysis of the adaptive strategies of the Fulani in pursuit of a sedentary lifestyle in the humid frontier of southwest Nigeria. Some of the adaptive strategies identified include: establishment of grazing orbits within a 20 km radius of their settlements, adjustment of herd size and structure, adoption of a multiple livelihood system, production of arable crops and appropriation of traditional social structures and kinship networks for herd management.

Long-term insecure land-holding arrangements, incessant seasonal bush burning for regeneration of pasture by the Fulani and the gradual destruction of the native forest cover are some of the problems arising from the sedentarisation of livestock production in the area. It was observed that the present land-use arrangement, even though it appears to guarantee the pastoralists security of tenure in the short term, is not sustainable in the long run, given the increasing commercialization of land in the area and rapid population growth. It was, therefore, concluded that government should put in place a land redistribution arrangement that will ensure secure land ownership by the Fulani. Development initiatives in the area should also focus on reinforcing those traditional practices of the Fulani that would guarantee a sustainable land-use system in the area.     

Assessing the enrichment of heavy metals in surface soil and plant (Digitaria eriantha) around coal-fired power plants in South Africa

Nine metals (Fe, Cu, Mn, Ni, Cd, Pb, Hg, Cr, and Zn) were determined in soil and Digitaria eriantha plants within the vicinity of three coal power plants (Matla, Lethabo, and Rooiwal), using ICP-OES and GFAAS. The total metal concentration in soil ranged from 0.05?±?0.02 to 1836?±?70 μg g^?1, 0.08?±?0.05 to 1744?±?29 μg g^?1, and 0.07?±?0.04 to 1735?±?91 μg g^?1 in Matla, Lethabo, and Rooiwal, respectively. Total metal concentration in the plant (D. eriantha) ranged from 0.005?±?0.003 to 535?±?43 μg g^?1 in Matla, 0.002?±?0.001 to 400?±?269 μg g^?1 in Lethabo, and 0.002?±?0.001 to 4277?±?201 μg g^?1 in Rooiwal. Accumulation factors (A) of less than 1 (i.e., 0.003 to 0.37) at all power plants indicate a low transfer of metal from soil to plant (excluder). Enrichment factor values obtained (2.4–5.0) indicate that the soils are moderately enriched with the exception of Pb that had significant enrichment of 20. Geo-accumulation index (I-geo) values of metals indicate that the soils are moderately polluted (0.005–0.65), except for Pb that showed moderate to strong pollution (1.74–2.53).     

Carboxymethyl cellulose thiol-imprinted polymers:Synthesis,characterization and selective Hg(Ⅱ) adsorption

Sulfur containing ion imprinted polymers(S-IIPs) were applied for the uptake of Hg(Ⅱ) from aqueous solution. Cysteamine which was used as the ligand for Hg(Ⅱ) complexation, was grafted along the epichlorohydrin crosslinked carboxylated carboxymethyl cellulose polymer chain through an amide reaction. The adsorption ability of S-IIPs towards Hg(Ⅱ)was investigated by kinetic and isotherm models, which, corresponding, showed that the adsorption process followed a pseudo-second-order, fitted well with the Langmuir isotherm with a maximum adsorption capacity of 80 mg/g. Moreover, thermodynamic studies indicated an endothermic and spontaneous reaction with the tendency of an enhanced randomness at the surface of the S-IIPs with temperature increases. S-IIPs indicated a high degree of selectivity towards Hg(Ⅱ) in the presence of Cu~(2+), Zn~(2+), Co~(2+), Pb~(2+)and Cd~(2+).Furthermore, the efficiency of S-IIPs was also evaluated against real samples showing86.78%, 91.88%, and 99.10% recovery for Hg(Ⅱ) wastewater, ground water and tap water,respectively. In this study, the adsorbent was successfully regenerated for five cycles, which allows for their reuse without significant loss of initial adsorption capability.