Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Concentration of heavy metals in various children's herbal tea types and their correlations

This investigation was undertaken to determine the concentrations of cadmium, lead, mercury, zinc, copper and magnesium in six tea types used as children's tea. Six types of tea of different herbal composition used for children's consumption (T1, T2, T3, T4, T5 and T6) were analyzed in three subsequent collections. The analysis of cadmium showed that the concentration was very similar in all types of children's tea, ranging from 0.233 to 0.369 mg/kg. Lead concentrations were in the range of 0.340-1.564 mg/kg without any significant differences. The analysis of mercury detected very low concentration of this metal in all samples (0.002-0.004 mg/kg). In zinc, the values ranged from 36.633 to 71.711 mg/kg, with significant differences (p < 0.001) according to tea type. Copper concentration was 10.089-30.178 mg/kg with the highest value in T4. The concentration of magnesium was significantly higher in tea T1 and T2 (102.311 and 129.422 mg/kg) in comparison with other tea types where the level was 19.811-37.411 mg/kg. The maximum tolerable limit determined by Codex Alimentarius was not exceeded in any sample. In general, correlation analysis detected high positive correlation between cadmium and lead (r = 0.89), cadmium and mercury (r = 0.92) and between lead and mercury (r = 0.77).     

Utilization of Waste Lignin and Hydrolysate From Chromium Tanned Waste in Blends of Hot-Melt Extruded PVA-Starch

The demand for biodegradable plastic material is increasing worldwide. However, the cost remains high in comparison with common forms of plastic. Requirements comprise low cost, good UV-stability and mechanical properties, as well as solubility and water uptake lead to the preparation of multi-component polymer blends based on polyvinyl alcohol and starch in combination with waste products that are hard to utilize—waste lignin and hydrolysate extracted from chromium tanned waste. Surprisingly the addition of such waste products into PVA gives rise to blends with better biodegradability than commercial PVA in an aquatic aerobic environment with non-adapted activated sludge. These blends also exhibited greater solubility in the water and UV stability than commercial PVA. Tests on the processing properties of the blends (melt flow index, tensile strength and elongation at break of the films) as well as their mechanical properties showed that materials based on these blends might be applied in agriculture (for example as the systems for controlled-release pesticide or fertilizer) and, somewhat, in the packaging sector.     

Mercury in fish tissues in the area of Malachov Hg-ore deposit (Slovakia)

Environmental Geochemistry and Health - The abandoned Malachov deposit belongs among the most important historic Hg deposits in the world. The soil, groundwater, surface water, plants, and animals...     

Anthropometric, socioeconomic, and maternal health determinants of placental transfer of organochlorine compounds

The aim of this study was to relate placental transfer, quantified by the cord to maternal serum concentration ratio (C/M), of five organochlorine pesticides (OCP) hexachlorobenzene (HCB), β-hexachlorocyclohexane (β-HCH), γ-hexachlorocyclohexane (γ-HCH) , p,p'-DDT, p,p'-DDE and 15 polychlorinated biphenyl (PCB) congeners (28, 52, 101, 105, 114, 118, 123⁺¹⁴⁹, 138⁺¹⁶³, 153, 156⁺¹⁷¹, 157, 167, 170, 180, and 189) to anthropometric, socioeconomic, and maternal health characteristics. We included into the study 1,134 births during the period 2002–2004 from two districts in eastern Slovakia with high organochlorine concentrations relative to other areas of the world. Only concentrations >LOD were taken into account. Variables as age, weight and height of mothers, parity, ethnicity, alcohol consumption, illness during pregnancy, smoking during pregnancy, hypertension, respiratory diseases, rheumatoid arthritis and diabetes mellitus, and birth weight were related to C/M. Results of regression analyses showed that C/M was predicted by several factors studied. Positive associations were observed for gestational alcohol consumption, fewer illnesses during pregnancy, maternal age, and maternal weight. Caucasians had a greater C/M compared to Romani for wet weight data of congeners 170 and 180 and in contrast C/M for HCB was greater in Romani. Our results show that drinking mothers compared to abstaining expose their fetuses not only to alcohol but to an increased level of several PCB congeners. A straightforward explanation of associations between C/M shifts and factors studied is very difficult, however, with regard to the high lipophilicity of OCPs and PCBs, changes in their kinetics probably reflect lipid kinetics.     

Assessment of exposure to PCB 153 from breast feeding and normal food intake in individual children using a system approach model

Investigators have typically relied on a single or few discrete time points as measures of polychlorinated biphenyl (PCB) body burden, however health effects are more likely to be the result of integrative exposure in time, optionally expressed as an area under the time curve (AUC) of PCB serum concentration. Using data from a subgroup of 93 infants from a birth cohort in eastern Slovakia—a region highly polluted by PCBs—we fit a system type model, customized to our longitudinal measures of serum PCB concentrations in cord, 6, 16, and 45 month blood specimens. The most abundant congener, PCB 153, was chosen for modeling purposes. In addition to currently used methods of exposure assessment, our approach estimates a concentration time profile for each subject, taking into account mean residence time of PCB 153 molecules in the body, duration of breast feeding, hypothetical PCB 153 concentration in steady-state without breast feeding and alternately without normal food intake. Hypothetical PCB 153 concentration in steady-state without normal food intake correlates with AUC (r = 0.84, p < 0.001) as well as with duration of breast feeding (r = 0.64, p < 0.001). It makes possible to determine each subject’s exposure profile expressed as AUC of PCBs serum concentration with a minimum model parameters. PCB body burden in most infants was strongly associated with duration of breast feeding in most, but not all children, was apparent from model output.     

Influence of H2SO4 and ferric iron on Cd bioleaching from spent Ni–Cd batteries

The paper is concerned with biohydrometallurgical methods of cadmium recovery from spent Ni–Cd batteries. Cd leaching efficiency from electrode material in different media (H₂SO₄ and Fe₂(SO₄)₃ solutions), at different Fe(III) concentrations and using the bacteria Acidithiobacillus ferrooxidans were investigated. The main aim of this study was to understand which from the bioleaching products (sulphuric acid or ferric sulphate) play a main role in the bioleaching process of Cd recovery. The influence of Fe ions on Cd leachability was confirmed. The best leaching efficiency of Cd (100%) was reached by bioleaching and also by leaching in Fe₂(SO₄)₃ solution. The results of X-ray diffraction confirmed that no cadmium was present in solid residuum obtained after the Cd bioleaching as well as Cd leaching using solely ferric iron. The use of H₂SO₄ solution resulted in the lowest efficiency of Cd leachability, the presence of hydroxides in electrode materials caused neutralization of the leaching solution and inhibition of Cd leaching.     

Concentration of heavy metals in various children's herbal tea types and their correlations

This investigation was undertaken to determine the concentrations of cadmium, lead, mercury, zinc, copper and magnesium in six tea types used as children's tea. Six types of tea of different herbal composition used for children's consumption (T1, T2, T3, T4, T5 and T6) were analyzed in three subsequent collections. The analysis of cadmium showed that the concentration was very similar in all types of children's tea, ranging from 0.233 to 0.369 mg/kg. Lead concentrations were in the range of 0.340–1.564 mg/kg without any significant differences. The analysis of mercury detected very low concentration of this metal in all samples (0.002–0.004 mg/kg). In zinc, the values ranged from 36.633 to 71.711 mg/kg, with significant differences (p < 0.001) according to tea type. Copper concentration was 10.089–30.178 mg/kg with the highest value in T4. The concentration of magnesium was significantly higher in tea T1 and T2 (102.311 and 129.422 mg/kg) in comparison with other tea types where the level was 19.811–37.411 mg/kg. The maximum tolerable limit determined by Codex Alimentarius was not exceeded in any sample. In general, correlation analysis detected high positive correlation between cadmium and lead (r = 0.89), cadmium and mercury (r = 0.92) and between lead and mercury (r = 0.77).