An assessment of land-based climate and carbon reversibility in the Australian Community Climate and Earth System Simulator

Future levels of climate change depend not only on carbon emissions but also on carbon uptake by the land and the ocean. Here we are using the Earth system model (ESM1) version of the Australian Community Climate and Earth System Simulator (ACCESS) to explore the potential and impact of removing carbon dioxide (CO₂) from the atmosphere through the climate and carbon cycle reversibility experiment. This experiment builds on the standard Coupled Model Intercomparison Project (CMIP) experiment, increasing CO₂ at 1% per year until 4xCO₂ is reached. The atmospheric CO₂ levels are then decreased at the same rate which brings the CO₂ back to pre-industrial levels. We then continue to run the model with constant CO₂ for another 350 years. Our analysis focuses on the response of the land carbon cycle. We find that carbon stores are largely reversible at the global scale over the timescale of changing CO₂. However, carbon stores continue to decrease after CO₂ returns to its initial value, and the land loses another 40 Pg of carbon (PgC) with the largest change in the tropics. It takes about 300 years beyond the period of changing CO₂ for the carbon stores to recover. Interestingly, we saw strong regional variations in the strength of the land response to changing CO₂. Australia showed the largest increase/decrease in biomass carbon (about 40%) and the largest variability in productivity, which was strongly correlated with rainfall. This highlights the importance of assessing the regional response to understanding the processes underlying the response and the sensitivity of these processes within each model. This understanding will benefit future multi-model analyses of this reversibility experiment. It also illustrates more generally the potential to use Earth system model experiments as part of the evaluation of proposed applications of carbon dioxide removal (CDR) technologies. As such, we recommend that these types of modelling experiments be included when mitigation policies are developed.

     

Predatory spider mimics acquire colony-specific cuticular hydrocarbons from their ant model prey

The integrity of social insect colonies is maintained by members recognising and responding to the chemical cues present on the cuticle of any intruder. Nevertheless, myrmecophiles use chemical mimicry to gain access to these nests, and their mimetic signals may be acquired through biosynthesis or through contact with the hosts or their nest material. The cuticular hydrocarbon profile of the myrmecophilous salticid spider Cosmophasis bitaeniata closely resembles that of its host ant Oecophylla smaragdina. Here, we show that the chemical resemblance of the spider does not arise through physical contact with the adult ants, but instead the spider acquires the cuticular hydrocarbons by eating the ant larvae. More significantly, we show that the variation in the cuticular hydrocarbon profiles of the spider depends upon the colony of origin of the ant larvae prey, rather than the parentage of the spider.     

A course in Environmental Planning and Management

Summary This paper describes a 13-weeks, third-year course in Environmental Planning and Management developed and taught by the authors. Initiated in 1969, the course consists of a mix of lectures, seminars, workshop/laboratory sessions and field-based projects. The objectives of the course are for students: to become aware of the need for, and the complexities of, environmental management; to be able to criticise constructively work done by environmental agencies and consultants, managers and decision makers; and to learn and apply some of the methods and techniques used in environmental management.Topics covered by the current syllabus are: concepts of resource and environment; constitutional aspects; international law and the environment; Australian and Canadian environmental legislation and agencies; human manipulation of ecosystems; energy subsidies; modification of biogeochemical cycles; population dynamics and cropping; fisheries; national parks and reserves—policies in different countries; international heritage areas; environmental assessment (including impact assessment, land evaluation, land capability and land suitability assessment); and regional, integrated land-use and environmental planning and management. Techniques taught include: field surveys and interviewing; laboratory analysis of selected water quality, sediment and soil parameters including nutrient concentrations, heavy metal and pesticide residues; and for some students, applications of geographic information systems (GIS) technology following preceding GIS courses.A major problem is selecting the most appropriate mix between the social and natural sciences—appropriate, first in terms of students' heterogeneous skills and backgrounds, and second, in terms of understanding the causes of environmental problems and issues, and devising practicable solutions.     

Using long-term data for a reintroduced population to empirically estimate future consequences of inbreeding

Inbreeding depression is an important long-term threat to reintroduced populations. However, the strength of inbreeding depression is difficult to estimate in wild populations because pedigree data are inevitably incomplete and because good data are needed on survival and reproduction. Predicting future population consequences is especially difficult because this also requires projecting future inbreeding levels and their impacts on long-term population dynamics, which are subject to many uncertainties. We illustrate how such projections can be derived through Bayesian state-space modeling methods based on a 26-year data set for North Island Robins (Petroica longipes) reintroduced to Tiritiri Matangi Island in 1992. We used pedigree data to model increases in the average inbreeding level (F ) over time based on kinship of possible breeding pairs and to estimate empirically N_e/N (effective/census population size). We used multiple imputation to model the unknown components of inbreeding coefficients, which allowed us to estimate effects of inbreeding on survival for all 1458 birds in the data set while modeling density dependence and environmental stochasticity. This modeling indicated that inbreeding reduced juvenile survival (1.83 lethal equivalents [SE 0.81]) and may have reduced subsequent adult survival (0.44 lethal equivalents [0.81]) but had no apparent effect on numbers of fledglings produced. Average inbreeding level increased to 0.10 (SE 0.001) as the population grew from 33 (0.3) to 160 (6) individuals over the 25 years, giving a ratio of 0.56 (0.01). Based on a model that also incorporated habitat regeneration, the population was projected to reach a maximum of 331–1144 birds (median 726) in 2130, then to begin a slow decline. Without inbreeding, the population would be expected stabilize at 887–1465 birds (median 1131). Such analysis, therefore, makes it possible to empirically derive the information needed for rational decisions about inbreeding management while accounting for multiple sources of uncertainty.     

Phytoremediation of a Petroleum‐Hydrocarbon Contaminated Shallow Aquifer in Elizabeth City,North Carolina,USA

A former bulk fuel terminal in North Carolina is a groundwater phytoremediation demonstration site where 3,250 hybrid poplars, willows, and pine trees were planted from 2006 to 2008 over approximately 579,000 L of residual gasoline, diesel, and jet fuel. Since 2011, the groundwater altitude is lower in the area with trees than outside the planted area. Soil‐gas analyses showed a 95 percent mass loss for total petroleum hydrocarbons (TPH) and a 99 percent mass loss for benzene, toluene, ethylbenzene, and xylenes (BTEX). BTEX and methyl tert‐butyl ether concentrations have decreased in groundwater. Interpolations of free‐phase, fuel product gauging data show reduced thicknesses across the site and pooling of fuel product where poplar biomass is greatest. Isolated clusters of tree mortalities have persisted in areas with high TPH and BTEX mass. Toxicity assays showed impaired water use for willows and poplars exposed to the site's fuel product, but Populus survival was higher than the willows or pines on‐site, even in a noncontaminated control area. All four Populus clones survived well at the site. © 2014 Wiley Periodicals, Inc.*     

Particulate,Carbon Monoxide,and Acid Emission Factors for Residential Wood Burning Stoves

Emissions from residential wood burning stoves are of Increasing concern in many areas. This concern is due to the magnitude of the emissions and the toxic and chemical characteristics of the pollutants. Recent testing of standard and new technology woodstoves has provided data for developing a family of particulate and carbon monoxide emission factor curves. This testing has also provided data illustrating the acidity of woodstove emissions. The particulate and carbon monoxide curves relate the actual stove emissions to the stove size and operating parameters of burn rate, fuel loading, and fuel moisture. Curves relating stove types to the acidity of emissions have also been constructed.

Test data show actual emissions vary from 3 to 50 grams per kilogram for particles and from 50 to 300 grams per kilogram for carbon monoxide. Since woodstove emissions are the largest single category of particulate emissions in many areas, it Is essential that these emissions be quantified specifically for geographic regions, allowing meaningful impact analysis modeling to be accomplished. Emission factors for particles and carbon monoxide are presented from several stove sizes and burn rates.

The acidic nature of woodstove emissions has been clearly demonstrated. Tests indicate woodstove flue gas condensate solutions to be predominantly in the 2.8 to 4.2 pH range. Condensate solutions from conventional woodstoves exhibited the characteristic buffering capacity of carboxylic acids when titrations were performed with a strong base. The environmental impact of buffered acidic woodstove emissions is not currently well understood; however, it is possible with the data presented here to make semi-quantitative estimates of acid emissions from particulate and carbon monoxide emission factors and wood use inventories.     

Social learning in a policy-mandated collaboration: community wildfire protection planning in the eastern United States

Policies such as the US Healthy Forests Restoration Act (HFRA) mandate collaboration in planning to create benefits such as social learning and shared understanding among partners. However, some question the ability of top-down policy to foster successful local collaboration. Through in-depth interviews and document analysis, this paper investigates social learning and transformative learning in three case studies of Community Wildfire Protection Planning (CWPP), a policy-mandated collaboration under HFRA. Not all CWPP groups engaged in social learning. Those that did learned most about organisational priorities and values through communicative learning. Few participants gained new skills or knowledge through instrumental learning. CWPP groups had to commit to learning, but the design of the collaborative-mandate influenced the type of learning that was most likely to occur. This research suggests a potential role for top-down policy in setting the structural context for learning at the local level, but also confirms the importance of collaborative context and process in fostering social learning.     

How can public–private partnerships contribute to security and human rights policy and practice in the extractive industries? A case study of The Democratic Republic of Congo (DRC)

Across sub-Saharan Africa, the presence of foreign large-scale mining companies is increasing. This is in part a result of depleting resources in countries such as Canada, United States and Australia, and in part from a more favorable national mine investment climate in several mineral-rich African countries. Their increased presence raises important questions around the potential role and function of Corporate Social Responsibility (CSR) in the sector. In post-conflict and/or fragile states, CSR has further implications for conflict and risk mitigation strategies to ensure the protection of human rights. One CSR approach increasingly being considered is the public–private partnership, whereby companies, public donors, and development agencies leverage their relationships for mutual benefit. There is merit in exploring its function in post-conflict fragile states, where socio-economic needs are high and the capacity of the state to respond to a variety of mine governance challenges is limited. Two case studies from the Democratic Republic of Congo (DRC) are presented, and their policy implications, discussed.     

Airborne molds and mycotoxins associated with handling of corn silage and oilseed cakes in agricultural environment

In agricultural areas, the contamination of feedstuffs with molds and mycotoxins presents major environmental and health concerns. During cattle feeding, fungi and mycotoxins were monitored in corn silage, oilseed cakes and bioaerosols collected in Normandy. Most of the corn silages were found to be contaminated by deoxynivalenol (mean concentration: 1883 μg kg^?1) while a few of oilseed cakes were contaminated by alternariol, fumonisin B₁ or gliotoxin. In ambient bioaerosols, the values for fungi per cubic meter of air varied from 4.3 × 10² to 6.2 × 10⁵ cfu m^?3. Seasonal variations were observed with some species like Aspergillus fumigatus which significantly decreased between the 2 seasons (P = 0.0186) while the Penicillium roqueforti group significantly increased during the second season (P = 0.0156). In the personal bioaerosols, the values for fungi per cubic meter of air varied from 3.3 10³ to 1.7 10⁶ cfu m^?3 and the number of A. fumigatus spores significantly decreased between the 2 seasons (P = 0.0488). Gliotoxin, an immunosuppressive mycotoxin, was quantified in 3 personal filters at 3.73 μg m^?3, 1.09 μg m^?3 and 2.97 μg m^?3.