People's Perception About Participatory Developmental Programs: Lessons from the Mountain Risk Engineering Program in the Indian Central Himalaya

The Indian Himalayan Region (IHR) is suffering from environmental degradation due to population pressure and infra-structural needs. This is coupled with a natural setting, which creates problems of accelerated soil erosion and mass wasting. In view of these environmental difficulties and the growing concern for effective restoration, there has become an urgent need for multi-disciplinary coordinated improvement schemes. The mitigation of risk arising from hazardous mass wasting processes, through a careful and systematic approach, has helped in the development of the concept of Mountain Risk Engineering (MRE). The MRE practices involve an integrated approach to solving the infra-structural engineering problems of hilly and mountainous areas through environmentally conscious cost-effective and site-specific designs. However, the role of people's participation is extremely crucial for the success of such programs. This paper analyzes the perception of the local people about the approaches adopted in MRE participatory developmental programs and throws light on the intricacies of peoples' participation.     

MODELING SEDIMENT AND PHOSPHORUS LOSSES IN AN AGRICULTURAL WATERSHED TO MEET TMDLs1

ABSTRACT: This paper studies the effectiveness of alternative farm management strategies at improving water quality to meet Total Maximum Daily Loads (TMDLs) in agricultural watersheds. A spatial process model was calibrated using monthly flow, sediment, and phosphorus (P) losses (1994 to 1996) from Sand Creek watershed in south‐central Minnesota. Statistical evaluation of predicted and observed data gave r² coefficients of 0.75, 0.69, and 0.49 for flow (average 4.1 m³/s), sediment load (average 0.44 ton/ha), and phosphorus load (average 0.97 kg/ha), respectively. The calibrated model was used to evaluate the effects of conservation tillage, conversion of crop land to pasture, and changes in phosphorus fertilizer application rate on pollutant loads. TMDLs were developed for sediment and P losses based on existing water quality standards and guidelines. Observed annual sediment and P losses exceeded these TMDLs by 59 percent and 83 percent, respectively. A combination of increased conservation tillage, reduced application rates of phosphorus fertilizer, and conversion of crop land to pasture could reduce sediment and phosphorus loads by 23 percent and 20 percent of existing loads, respectively. These reductions are much less than needed to meet TMDLs, suggesting that control of sediment using buffer strips and control of point sources of phosphorus are needed for the remaining reductions.     

A study on the arsenic concentration in groundwater of a coastal aquifer in south-east India: an integrated approach

The occurrence of arsenic in drinking water and its detrimental effects have drawn much attention in recent years. Several studies have been conducted in the deltaic plains of River Ganga, NE part of the India, and in other countries, but no systematic study was conducted in South India on occurrence of arsenic in groundwater. The main aim of this study is to determine the level of arsenic in groundwater and to understand the relation with other geochemical parameters of groundwater in the south-eastern coastal aquifer at Kalpakkam region, India. This region is represented by three different lithologies, viz. charnockites, flood plain alluvium and marine alluvium. Twenty-nine representative samples of groundwater were collected and analysed for major ions, metals and isotopes such as ²H and ¹⁸O. In addition, geophysical method was also attempted to understand the subsurface condition. The spatial variation in arsenic (As) indicates that higher concentration was observed around the landfill sites and irrigated regions, which was supported by geochemical, statistical and isotopic inferences. The variation in the As with depth, lithology and sources has been clearly brought out. Though the values of As does not exceed the drinking water permissible limit (10 mg/l), it has reached a near permissible level of 8.7 ppb. Hence, it is essential to understand the geochemical behaviour of As for a proper future management of the water resource in the study area.     

Efficacy of woody biomass and biochar for alleviating heavy metal bioavailability in serpentine soil

Crops grown in metal-rich serpentine soils are vulnerable to phytotoxicity. In this study, Gliricidia sepium (Jacq.) biomass and woody biochar were examined as amendments on heavy metal immobilization in a serpentine soil. Woody biochar was produced by slow pyrolysis of Gliricidia sepium (Jacq.) biomass at 300 and 500 °C. A pot experiment was conducted for 6 weeks with tomato (Lycopersicon esculentum L.) at biochar application rates of 0, 22, 55 and 110 t ha^?1. The CaCl₂ and sequential extractions were adopted to assess metal bioavailability and fractionation. Six weeks after germination, plants cultivated on the control could not survive, while all the plants were grown normally on the soils amended with biochars. The most effective treatment for metal immobilization was BC500-110 as indicated by the immobilization efficiencies for Ni, Mn and Cr that were 68, 92 and 42 %, respectively, compared to the control. Biochar produced at 500 °C and at high application rates immobilized heavy metals significantly. Improvements in plant growth in biochar-amended soil were related to decreasing in metal toxicity as a consequence of metal immobilization through strong sorption due to high surface area and functional groups.     

Determination of the utility of groundwater with respect to the geochemical parameters: a case study from Tuticorin District of Tamil Nadu (India)

In modern living, rapid development has created an increase in demand for groundwater. An endeavor has been made to understand the hydrogeochemical parameters to determine the utility of groundwater. This situation is severe in coastal hard rock aquifers due to the influence of salinity ingression and other anthropogenic influence. A total of 135 groundwater samples were collected from the coastal aquifer of the Tuticorin district and analyzed for major cations and anions during premonsoon (PRM) and postmonsoon (POM). The ions analyzed were used to determine the drinking, agricultural and domestic utility of groundwater. The electrical conductivity (EC) contour shows that the groundwater quality is poor along the coast. The parameters were compared with WHO (Guidelines for drinking water quality recommendations, WHO, Geneva, 2004) standard for drinking purpose. A groundwater classification method has been developed for groundwater in the area using a dynamic water quality index (WQI). On the basis of the WQI so computed, groundwater in the area has been spatially classified into “excellent,” “good,” “poor” and “very poor” to “Unsuitable” water types variation lithologywise. Corrosivity ratio and hardness were noted to be higher and found to be unsuitable in majority of the regions for domestic purpose. Higher fluoride concentration was noted in the central part of the study area represented by complex geology comprising of the hornblende biotite gneiss and charnockite. Sodium percentage (Na%), sodium absorption ratio, residual sodium carbonate, Wilcox (Classification and use of irrigation waters, US Department of Agriculture, Washington, 1955), permeability index, residual sodium bicarbonate, magnesium hazard, Kelly’s ratio and potential salinity also indicate that most of the groundwater samples are not suitable for irrigation purposes.     

Indoor–outdoor concentrations of RSPM in classroom of a naturally ventilated school building near an urban traffic roadway

A study on indoor–outdoor RSPM (PM₁₀, PM_2.5 and PM_1.0) mass concentration monitoring has been carried out at a classroom of a naturally ventilated school building located near an urban roadway in Delhi City. The monitoring has been planned for a year starting from August 2006 till August 2007, including weekdays (Monday, Wednesday and Friday) and weekends (Saturday and Sunday) from 8:0 a.m. to 2:0 p.m., in order to take into account hourly, daily, weekly, monthly and seasonal variations in pollutant concentrations. Meteorological parameters, including temperature, rH, pressure, wind speed and direction, and traffic parameters, including its type and volume has been monitored simultaneously to relate the concentrations of indoor–outdoor RSPM with them. Ventilation rate has also been estimated to find out its relation with indoor particulate concentrations. The results of the study indicates that RSPM concentrations in classroom exceeds the permissible limits during all monitoring hours of weekdays and weekends in all seasons that may cause potential health hazards to occupants, when exposed. I/O for all sizes of particulates are greater than 1, which implies that building envelop does not provide protection from outdoor pollutants. Further, a significant influence of meteorological parameters, ventilation rate and of traffic has been observed on I/O. Higher I/O for PM₁₀ is indicating the presence of its indoor sources in classroom and their indoor concentrations are strongly influenced by activities of occupants during weekdays.     

MTBE oxidation byproducts from the treatment of surface waters by ozonation and UV-ozonation

In recent years, there has been considerable concern over the release of methyl tert-butyl ether (MTBE), a gasoline additive, into the aquifers used as potable water sources. MTBE readily dissolves in water and has entered the environment via gasoline spills and leaking storage tanks. In this paper, we investigate ozonation and UV-ozonation for treatment of MTBE in contaminated drinking water sources. We report the test protocol and results of using solid-phase microextraction (SPME) to determine the level of MTBE and its oxidation byproducts in samples drawn from laboratory-scale ozone and UV-ozone reactors being evaluated at a US EPA research facility. Analysis of a prepared MTBE standard indicated a detection limit on the order of 0.1 microgl(-1) with a repeatability of +/-0.4%. Results show that the overall rate of removal of MTBE via UV-ozonation in a relatively turbid surface water (15 ntu) is twice that of ozonation alone. In addition, GC-MS analysis of decomposition products showed that tert-butyl formate (TBF), methyl acetate, butene, acetone, and acetaldehyde were produced by both processes. TBF and butene reach similar maximum yields from the two processes, but are more efficiently degraded by UV-ozonation treatment. This indicates that these treatment processes also degrade these byproducts. In contrast, the remaining byproducts (methyl acetate, acetone, and acetaldehyde) are formed at similar levels during treatment, but are not degraded once formed. These byproducts may be resistant to hydrogen abstraction by hydroxyl radical.     

Characterization of products formed in the reaction of ozone with alpha-pinene: case for organic peroxides

The generation of reactive oxygen species (ROS) and their subsequent induced pulmonary and systemic oxidative stress has been implicated as an important molecular mechanism of PM-mediated toxicity. However, recent work has shown that there is significant ROS associated with ambient PM. In order to understand the formation mechanisms as well as understand the potential health effects of particle-bound oxidative species, the alpha-pinene-O(3) oxidation chemical system was studied to elucidate the structures of reaction products using liquid chromatography-multiple stage mass spectrometry (LC-MS(n)). The classes of compounds identified based on their multiple stage-MS fragmentation patterns, mechanistic considerations of alpha-pinene-O(3) oxidation, and general fragmentation rules, of the products from this reaction system were highly oxygenated species, predominantly containing hydroperoxide and peroxide functional groups. The oxidant species observed were clearly stable for the 1-3 h that elapsed during aerosol collection and analysis, and probably for much longer, thus rendering it possible for these species to bind onto particles forming fine particulate organic peroxides that concentrate on the particles and could deliver concentrated doses of ROS in vivo to tissue.     

Study on the hydrogeochemical characteristics in groundwater, post- and pre-tsunami scenario, from Portnova to Pumpuhar, southeast coast of India

Natural hazards cause great damage to humankind and the surrounding ecosystem. They can cast certain indelible changes on the natural system. One such tsunami event occurred on 26 December 2004 and caused serious damage to the environment, including deterioration of groundwater quality. This study addresses the groundwater quality variation before and after the tsunami from Pumpuhar to Portnova in Tamil Nadu coast using geochemical methods. As a part of a separate Ph.D. study on the salinity of groundwater from Pondicherry to Velankanni, water quality of this region was studied with the collection of samples during November 2004, which indicated that shallow aquifers were not contaminated by sea water in certain locations. These locations were targeted for post-tsunami sample collection during the months of January, March and August 2005 from shallow aquifers. Significant physical mixing (confirmed with mixing models) within the aquifer occurred during January 2005, followed by precipitation of salts in March and complete leaching and dissolution of these salts in the post-monsoon season of August. As a result, maximum impact of tsunami water was observed in August after the onset of monsoon. Tsunami water inundated inland water bodies and topographic lows where it remained stagnant, especially in the near-shore regions. Maximum tsunami inundation occurred along the fluvial distributary channels, and it was accelerated by topography to a certain extent where the southern part of the study area has a gentler bathymetry than the north.     

Interaction Effects of Metals and Salinity on Biodegradation of a Complex Hydrocarbon Waste

Abstract

The presence of high levels of salts because of produced brine water disposal at flare pits and the presence of metals at sufficient concentrations to impact microbial activity are of concern to bioremediation of flare pit waste in the upstream oil and gas industry. Two slurry-phase biotreatment experiments based on three-level factorial statistical experimental design were conducted with a flare pit waste. The experiments separately studied the primary effect of cadmium [Cd(II)] and interaction effect between Cd(II) and salinity and the primary effect of zinc [Zn(II)] and interactioneffect between Zn(II) and salinity on hydrocarbon biodegradation. The results showed 42–52.5% hydrocarbon removal in slurries spiked with Cd and 47–62.5% in the slurries spiked with Zn. The analysis of variance showed that the primary effects of Cd and Cd–salinity interaction were statistically significant on hydrocarbon degradation. The primary effects of Zn and the Zn-salinity interaction were statistically insignificant, whereas the quadratic effect of Zn was highly significant on hydrocarbon degradation. The study on effects of metallic chloro-complexes showed that the total aqueous concentration of Cd or Zn does not give a reliable indication of overall toxicity to the microbial activity in the presence of high salinity levels.