Residential solid waste generation and classification study of ten headquarter cities of Azad Jammu & Kashmir,Pakistan

Journal of Material Cycles and Waste Management - Effective municipal solid waste collection and disposal system is not possible without reliable solid waste generation and classification data...     

Spatial and temporal rainfall variability and its controlling factors under an arid climate condition: case of Gabes Catchment,Southern Tunisia

Environment, Development and Sustainability - Precipitation is the principal component of the hydrologic cycle. This study examines the spatial and temporal rainfall variability in Gabes Catchment...     

Adsorptive removal of phosphate by the bimetallic hydroxide nanocomposites embedded in pomegranate peel

This study aimed to fabricate new and effective material for the efficiency of phosphate adsorption. Two types of adsorbent materials, the zirconium hydroxides embedded in pomegranate peel (Zr/Peel) and zirconium-lanthanum hydroxides embedded in pomegranate peel (Zr–La/Peel) were developed. Scanning electronic microscopy (SEM), x-ray photoelectron spectroscopy (XPS) and x-ray diffraction (XRD) were evaluated to give insight into the physicochemical properties of these adsorbents. Zr–La/Peel exceeded the adsorption efficiency of Zr/Peel adsorbents in batch adsorption experiments at the same pH level. The peel as a host can strive to have a strong “shielding effect” to increase the steadiness of the entrenched Zr and La elements. La and Zr are hydroxide metals that emit many hydrogen ions during the hydrolysis reaction, which contribute to protonation and electrostatic attraction. The highest adsorption capacity of La–Zr/Peel for phosphate was calculated to be 40.21 mg/g, and pseudo second-order equation is very well fitted for kinetic adsorption. Phosphate adsorption efficiency was reduced by an increase of pH. With the background of coexisting Cl^?, little effect on adsorption efficiency was observed, while adsorption capacities were reduced by almost 20–30% with the coexistence of ${{\text{SO}}_4}^{2?}$, ${{\text{NO}}_3}^{?}$ and humic acid (HA).     

Water and soil pollution by Spent lubricating oils

This paper shows that spent lubricating oils from automobile engines generate carboxylic acids on environmental exposure. Samples of exposed oils, isolated from polluted river water and shore muds obtained from various locations, showed a direct proportionality between carboxylic acid content and time of exposure. Carboxylic acids were isolated by solvent extraction and studied by infrared spectroscopy.     

Gas permeability and tortuosity for packed layers of processed municipal solid wastes and incinerator residue.

To make a proper evaluation of gas component movement inside a landfill site, it is important to investigate the different parameters related to gas flow. In this work gas-filled porosity, intrinsic permeability, tortuosity and equivalent pore radius were determined for various packed wastes, such as incineration ash, shredded bulky waste and shredded incombustible waste. These parameters were measured/inferred for samples packed in a column and exposed to a controlled gas flow. The effect of waste conditions, especially the moisture content, on these parameters was also investigated. The intrinsic permeability of such packed wastes was generally in the order of 10(-10) to 10(-9) m2, except for some ash that was one to two orders lower. The tortuosity of waste layer was greater than that of a particulate material and ranged between 2 and 10. The equivalent pore radius was generally in the order of 10(-4) m, which means that gas diffusion is still ordinary in such packed waste layer. The obtained results will be utilized when simulating gas flow inside a landfill site for biogas extraction or site aeration.     

Towards a model of safety climate measurement.

In this study, a survey instrument was developed to measure safety climate. A review of the scientific literature as well as consultation with an expert panel was used to determine the survey's dimensions. Next, the survey was administered, first as a pilot study (n = 15) and then as a full scale study (n = 229), to employees of the City of Cincinnati Department of Public Works. The psychometric integrity of the survey was assessed according to validity, reliability and utility criteria. Results are presented and discussed.     

Incorporating green and sustainable remediation analysis in coal combustion residuals (CCR) surface impoundment closure decision making

In response to new coal combustion residuals (CCR) disposal regulations, many coal‐fired utilities have closed existing unlined surface impoundments (SIs) that were traditionally used for disposal of CCR. The two primary closure options are closure‐in‐place (CIP), which involves dewatering and capping, and closure‐by‐removal (CBR), which includes excavation, transportation, and disposal of the CCR into a lined landfill. This article provides a methodology and a case study of how green and sustainable remediation concepts, including accounting for the life cycle environmental footprints and the physical risks to workers and community members, can be incorporated into the closure decision‐making process. The environmental impacts, occupational risks, and traffic‐related fatalities and injuries to workers and community members were calculated and compared for closure alternatives at a hypothetical site. The results demonstrated that the adverse impacts of the CBR option were significantly greater than those of the CIP option with respect to the analyzed impact pathways.     

Proposing of new building scheme and composite towards global warming mitigation for Malaysia

The building sector has been regarded as a potential sector where there is large capacity to reduce the climate change effect. This study has proposed solutions to mitigate environmental impacts and achieve low CO₂ emission from residential sector. Therefore, full life cycle assessment (LCA) has been run to assess the CO₂ emission and its effect on the atmosphere and climate change. Based on the result, timber scheme is the best choice due to releasing less CO₂ emissions to the atmosphere. However, house builders in Malaysia have almost completely neglected timber as a building material, with timber use as building components reduced to 5%. In this study, LCA Software was used to assess CO₂ emissions from different wall construction. The alternative building scheme has been made by reinforce steel stud, wooden beam and timber wall (S8) to improve the scheme deficiency while releasing less CO₂ emissions compared to other schemes. Therefore, S8 has a decreased CO₂ effect by 85% less than precast concrete frame and 90% less than brick over their lifetime. (S8) increased the load bearing compared to conventional timber beam. Thus, new scheme S8 could be replaced by current scheme and promote more adjustable scheme for Malaysian housing.