Prenatal diagnosis of 21-hydroxylase deficiency by rflp analysis of the 21-hydroxylase,complement C4, and HLA class II genes

In 19 pregnancies at risk for 21-hydroxylase deficiency (21OHD) in 18 families with at lea one affected child, prenatal diagnosis was performed by RFLP analysis using the enzymi Taq I and EcoRI and the DNA probes specific for the 21 OH genes, the closely linke complement C4 genes and the highly polymorphic HLA class II genes DRB, DQB, and DPI For fetal DNA analysis either chorionic villi or cultivated amniotic cells were used. In all 1 cases, a clear prenatal diagnosis was possible either with the 21OH probe alone or in mo cases, by combining the results of the different closely linked loci.     

Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.     

CCall--healthy and successful work in call centres.

Call centre workplaces are in many ways a challenge to occupational health and safety. The occupation itself can be described as an IT information technology-supported, communication-intensive form of work with often unusual working hours and a high rate of part-time employment. Data on the employee turnover as well as absenteeism related to occupational disability is quite contradictory. Occupational safety and its proponents still have to find new ways into the corporate structures and cultures of this relatively new and rapidly growing branch of industry. In a 2-year research and development project, using a holistic approach and under consideration of all the relevant disciplines, call centre workplaces were studied, and organisational measures were developed and field tested by putting them into practice. Practical help was developed for a sustainable strategy for successful and healthy work in call centres.     

Methane oxidation in slurry storage surface crusts

Livestock manure is a significant source of atmospheric methane (CH4), especially during liquid storage. In liquid manure (slurry) storages a surface crust may form naturally, or an artificial surface crust can be established. We investigated whether there is a potential for CH4 oxidation in this environment. Surface crust materials were sampled from experimental storages with cattle slurry (with natural crust) or anaerobically digested cattle slurry (with straw layer) that had been stored with or without a wooden cover. Extracts of surface crust material were incubated with 5.6% CH4 in the headspace, and methanotrophic activity was demonstrated in all four treatments following a 4- to 10-d lag phase. Subsequent incubation of field-moist surface crust material with 350 microL L(-1) CH4 also showed CH4 oxidation, indicating a potential for CH4 removal under practical storage conditions. There was no CH4 oxidation activity during incubation of autoclaved samples. Methane oxidation rates were 0.1 to 0.5 mg kg(-1) organic matter (OM) h(-1), which is comparable with the activity in wetlands and rice paddies. Partial drying increased CH4 oxidation to 0.2 to 1.4 mg kg(-1) OM h(-1), probably as a result of improved diffusivity within the surface crust. Rewetting reversed the stimulation of methanotrophic activity in some treatments, but not in others, possibly due to a decline in CH4 production in anaerobic volumes, or to growth of methanotrophs during incubation. This study presents direct evidence for methanotrophic activity in slurry storages. Measures to ensure crust formation with or without a solid cover appear to be a cost-effective greenhouse gas mitigation option.     

Greening Leviathan: the rise of the environmental state?

‘Bringing the state back in’ to research on comparative, inter-, and trans-national environmental politics and policy will contribute to better understanding of the limits and prospects of contemporary approaches to environmental politics and the overall evolution of contemporary states once environmental issues become central. The rationale for the state as an analytical perspective in environmental policy and politics is explained, and an empirically oriented concept of the environmental state is introduced, along with a tentative sketch of its evolution in historical perspective. A research agenda on the environmental state is mapped out, centring around variation and convergence in environmental states across space and time; the political/economic dynamics of contemporary environmental states; and inter-linkages among environmental problems, the constitution of political communities, and the functioning of the public power. In conclusion, the ways in which the contributions to this volume address that research agenda are introduced.     

Influences of perfluorooctanoic acid on the aggregation of multi-walled carbon nanotubes

The aggregation of multi-walled carbon nanotubes (MWCNTs) in the aqueous phase not only inhibits their extensive utilization in various aspects but also dominates their environmental fate and transport.The role of surfactants at low concentration in the aggregation of MWCNTs has been studied,however the effect of perfluorinated surfactants at low concentration is uncertain.To understand this interfacial phenomenon,the influences of perfluorooctanoic acid (PFOA),and sodium dodecyl sulfate (SDS) as a control,on MWCNT aggregation in the aqueous phase were examined by the UV absorbency method.Influences of pH and cationic species on the critical coagulation concentration (CCC) value were evaluated.The CCC values were dependent on the concentration of PFOA,however a pronounced effect of SDS concentration on the CCC values was not observed.The CCC values of the MWCNTs were 51.6 mmol/L in NaCl and 0.28 mmol/L in CaCl 2 solutions,which suggested pronounced differences in the effects of Na+ and Ca2+ ions on the aggregation of the MWCNTs.The presence of both PFOA and SDS significantly decreased the CCC values of the MWCNTs in NaCl solution.The aggregation of the MWCNTs took place under acidic conditions and was not notably altered under neutral and alkaline conditions due to the electrostatic repulsion of deprotonated functional groups on the surface of the MWCNTs.     

Body mass estimations for <Emphasis Type="Italic">Plateosaurus engelhardti</Emphasis> using laser scanning and 3D reconstruction methods

Both body mass and surface area are factors determining the essence of any living organism. This should also hold true for an extinct organism such as a dinosaur. The present report discusses the use of a new 3D laser scanner method to establish body masses and surface areas of an Asian elephant (Zoological Museum of Copenhagen, Denmark) and of Plateosaurus engelhardti, a prosauropod from the Upper Triassic, exhibited at the Paleontological Museum in Tübingen (Germany). This method was used to study the effect that slight changes in body shape had on body mass for P. engelhardti. It was established that body volumes varied between 0.79 m³ (slim version) and 1.14 m³ (robust version), resulting in a presumable body mass of 630 and 912 kg, respectively. The total body surface areas ranged between 8.8 and 10.2 m², of which, in both reconstructions of P. engelhardti, ∼33% account for the thorax area alone. The main difference between the two models is in the tail and hind limb reconstruction. The tail of the slim version has a surface area of 1.98 m², whereas that of the robust version has a surface area of 2.73 m². The body volumes calculated for the slim version were as follows: head 0.006 m³, neck 0.016 m³, fore limbs 0.020 m³, hind limbs 0.08 m³, thoracic cavity 0.533 m³, and tail 0.136 m³. For the robust model, the following volumes were established: 0.01 m³ head, neck 0.026 m³, fore limbs 0.025 m³, hind limbs 0.18 m³, thoracic cavity 0.616 m³, and finally, tail 0.28 m³. Based on these body volumes, scaling equations were used to assess the size that the organs of this extinct dinosaur have.     

Nutritionally relevant elements in staple foods: influence of arable site versus choice of variety

Eighteen representative sites for the Austrian grain-growing and eight for the potato-growing zones (soils and crops) were investigated. On each site, total element contents (B, Ba, Ca, Cd, Co, Cu, Fe, K, Li, Mg, Mn, Mo, Na, P, Sr and Zn) were determined in 4–12 varieties of winter wheat (n = 136), 6 varieties of spring durum wheat (n = 30), 5 varieties of winter durum wheat (n = 15), 7 varieties of rye (n = 49), 5 varieties of spring barley (n = 30) and 5 varieties of potatoes (n = 40). Element accumulations in grain species and potato tubers varied significantly with site conditions, with the main exceptions for B in potatoes and wheat as well as for Zn, Cu and Co in durum wheat. On average, across all investigated sites, differences in varieties occurred concerning the elements Ca, Cd, Ba, Sr and Zn (except Zn in potatoes and winter durum). A rough estimation revealed that an average Austrian consumer of wheat, rye and potatoes meets more than 50% of the needs of daily element intake for K, P and Mg, between 36 and 72% for Fe, Zn and Cu, and more than 100% for Co, Mo and Mn. In particular, the elements Ca and Na have to be added from other sources.     

Distribution,fate and formation of non-extractable residues of a nonylphenol isomer in soil with special emphasis on soil derived organo-clay complexes

Anthropogenic contaminants like nonylphenols (NP) are added to soil, for instance if sewage-sludge is used as fertilizer in agriculture. A commercial mixture of NP consists of more than 20 isomers. For our study, we used one of the predominate isomers of NP mixtures, 4-(3,5-dimethylhept-3-yl)phenol, as a representative compound. The aim was to investigate the fate and distribution of the isomer within soil and soil derived organo-clay complexes. Therefore, ¹⁴C- and ¹³C-labeled NP was added to soil samples and incubated up to 180 days. Mineralization was measured and soil samples were fractionated into sand, silt and clay; the clay fraction was further separated in humic acids, fulvic acids and humin. The organo-clay complexes pre-incubated for 90 or 180 days were re-incubated with fresh soil for 180 days, to study the potential of re-mobilization of incorporated residues. The predominate incorporation sites of the nonylphenol isomer in soil were the organo-clay complexes. After 180 days of incubation, 22 % of the applied ¹⁴C was mineralized. The bioavailable, water extractable portion was low (9 % of applied ¹⁴C) and remained constant during the entire incubation period, which could be explained by an incorporation/release equilibrium. Separation of organo-clay complexes, after extraction with solvents to release weakly incorporated, bioaccessible portions, showed that non-extractable residues (NER) were preferentially located in the humic acid fraction, which was regarded as an effect of the chemical composition of this fraction. Generally, 27 % of applied ¹⁴C was incorporated into organo-clay complexes as NER, whereas 9 % of applied ¹⁴C was bioaccessible after 180 days of incubation. The re-mobilization experiments showed on the one hand, a decrease of the bioavailability of the nonylphenol residues due to stronger incorporation, when the pre-incubation period was increased from 90 to 180 days. On the other hand, a shift of these residues from the clay fraction to other soil fractions was observed, implying a dynamic behavior of incorporated residues, which may result in bioaccessibility of the NER of nonylphenol.