Polycyclic aromatic hydrocarbons (PAHs) in surface sediments from the Bizerte Lagoon,Tunisia: levels,sources, and toxicological significance

To assess the status of polycyclic aromatic hydrocarbon (PAH) contamination in sediments from the Bizerte Lagoon (northern Tunisia), 18 surface sediment samples were collected in March 2011 and analyzed for 14 US Environmental Protection Agency priority PAHs by high-performance liquid chromatography. The total concentrations of the 14 PAHs (ΣPAHs) ranged from 16.9 to 394.1 ng g^?1 dry weight (dw) with a mean concentration of 85.5 ng g^?1 dw. Compared with other lagoons, coasts, and bays in the world, the concentrations of PAHs in surface sediments of the Bizerte Lagoon are low to moderate. The PAHs’ composition pattern was dominated by the presence of four-ring PAHs (45.8 %) followed by five-ring (26.8 %) and three-ring PAHs (12.7 %). The PAH source analysis suggested that the main origin of PAHs in the sediments of the lagoon was mainly from pyrolytic sources. According to the numerical effect-based sediment quality guidelines of the USA, the levels of PAHs in the Bizerte Lagoon should not exert adverse biological effects. The total benzo[a]pyrene toxicity equivalent values calculated for the samples varied from 3.1 to 53.7 ng g^?1 dw with an average of 10.6 ng g^?1 dw.     

Distribution and ecological risk of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in surface sediments from the Bizerte lagoon,Tunisia

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were determined in 18 surface sediment samples collected from Bizerte lagoon, Tunisia. The total concentrations of ten PCBs (∑PCBs) and of four OCPs (∑OCPs) in the sediments from this area ranged from 0.8 to 14.6 ng g^?1 dw (average value, 3.9 ng g^?1 dw) and from 1.1 to 14.0 ng g^?1 dw (average value, 3.3 ng g^?1 dw), respectively. Among the OCPs, the range of concentrations of dichlorodiphenyltrichloroethane and its metabolites (DDTs) and hexachlorobenzene (HCB) were 0.3–11.5 ng g^?1 dw (1.9 ng g^?1 dw) and 0.6–2.5 ng g^?1 dw (1.4 ng g^?1 dw), respectively. Compositional analyses of the POPs indicated that PCB 153, 138 and 180 were the predominant congeners accounting for 60 % of the total PCBs. In addition, p,p′-DDT was found to be the dominant DDTs, demonstrating recent inputs in the environment. Compared with some other regions of the world, the Bizerte lagoon exhibited low levels of PCBs and moderate levels of HCB and DDTs. The high ratios ΣPCBs/ΣDDTs indicated predominant industrial versus agricultural activities in this area. According to the established guidelines for sediment quality, the risk of adverse biological effects from such levels of OCPs and PCBs, as recorded at most of the study sites, was insignificant. However, the higher concentrations in stations S1 and S3 could cause biological damage.     

Cluster analysis and quality assessment of logged water at an irrigation project, eastern Saudi Arabia

A multivariate statistical technique, cluster analysis, was used to assess the logged surface water quality at an irrigation project at Al-Fadhley, Eastern Province, Saudi Arabia. The principal idea behind using the technique was to utilize all available hydrochemical variables in the quality assessment including trace elements and other ions which are not considered in conventional techniques for water quality assessments like Stiff and Piper diagrams. Furthermore, the area belongs to an irrigation project where water contamination associated with the use of fertilizers, insecticides and pesticides is expected. This quality assessment study was carried out on a total of 34 surface/logged water samples. To gain a greater insight in terms of the seasonal variation of water quality, 17 samples were collected from both summer and winter seasons. The collected samples were analyzed for a total of 23 water quality parameters including pH, TDS, conductivity, alkalinity, sulfate, chloride, bicarbonate, nitrate, phosphate, bromide, fluoride, calcium, magnesium, sodium, potassium, arsenic, boron, copper, cobalt, iron, lithium, manganese, molybdenum, nickel, selenium, mercury and zinc. Cluster analysis in both Q and R modes was used. Q-mode analysis resulted in three distinct water types for both the summer and winter seasons. Q-mode analysis also showed the spatial as well as temporal variation in water quality. R-mode cluster analysis led to the conclusion that there are two major sources of contamination for the surface/shallow groundwater in the area: fertilizers, micronutrients, pesticides, and insecticides used in agricultural activities, and non-point natural sources.     

Chlorination Byproducts in Drinking Water Produced from Thermal Desalination in United Arab Emirates

Oil activities in the Arabian Gulf can potentially affect the quality of the intake water available for coastal desalination plants. This paper addresses such situation by investigating the quality of intake water and desalinated water produced by a desalination plant located near a coastal industrial complex in United Arab Emirates (UAE). Analyses of the organic compounds on the intake seawater reported non-detected levels in most samples for the three tested organic groups; namely Polyaromatic Hydrocarbons (PAHs), Phenols, and Polychlorinated Biphenyls (PCBs). Trihalomethanes (THMs) and Haloacetic Acids (HAAs) were also tracked in the intake sea water, throughout the desalination processes, and in the final produced drinking water, to evaluate the undertaken pre- and post chlorination practices. The levels of considered Chlorination Byproducts (CBPs) were mostly found below the permissible international limits with few exceptions showing tangible levels of bromoform in the intake seawater and in the final produced drinking water as well. Lab-controlled experiments on the final produced distillate showed little contribution of its blending with small percentage of seawater upon the formation of trihalomethane and in particular, bromoform. Such results indicate that the organic precursors originated in the seawater are responsible for bromoform formation in the final distillate.     

缺水、海水淡化与污染

全世界快速的人口增长、城市化和高标准生活加剧了水的短缺,已经导致许多国家(特别是在干旱与半干旱地区)不得不采用海水淡化技术,首要满足家庭需求.在1950与1960年代,海水淡化业商业化.随着成本的大幅度降低和效率的提高,特别是自从1970年代以来,海水淡化已经变成满足家庭需要的一项战略和可靠来源.     

Predicting ozone levels

This paper presents a statistical model that is capable of predicting ozone levels from precursor concentrations and meteorological conditions during daylight hours in the Shuaiba Industrial Area (SIA) of Kuwait. The model has been developed from ambient air quality data that was recorded for one year starting from December 1994 using an air pollution mobile monitoring station. The functional relationship between ozone level and the various independent variables has been determined by using a stepwise multiple regression modelling procedure. The model contains two terms that describe the dependence of ozone on nitrogen oxides (NOx) and nonmethane hydrocarbon precursor concentrations, and other terms that relate to wind direction, wind speed, sulphur dioxide (SO₂) and solar energy. In the model, the levels of the precursors are inversely related to ozone concentration, whereas SO₂ concentration, wind speed and solar radiation are positively correlated. Typically, 63 % of the variation in ozone levels can be explained by the levels of NOx. The model is shown to be statistically significant and model predictions and experimental observations are shown to be consistent. A detailed analysis of the ozone-temperature relationship is also presented; at temperatures less than 27 °C there is a positive correlation between temperature and ozone concentration whereas at temperatures greater than 27 °C a negative correlation is seen. This is the first time a non-monotonic relationship between ozone levels and temperature has been reported and discussed.     

Groundwater vulnerability assessment for the Banyas Catchment of the Syrian coastal area using GIS and the RISKE method

Vulnerability assessment to delineate areas that are more susceptible to contamination from anthropogenic sources has become an important element for sensible resource management and landuse planning. This contribution aims at estimating aquifer vulnerability by applying the RISKE model in Banyas Catchment Area (BCA), Tartous Prefecture, west Syria. An additional objective is to demonstrate the combined use of the RISKE model and a geographical information system (GIS) as an effective method for groundwater pollution risk assessment. The RISKE model uses five environmental parameters (Rock of aquifer media, Infiltration, Soil media, Karst, and Epikarst) to characterize the hydro-geological setting and evaluate aquifer vulnerability. The elevated eastern and low western part of the study area was dominated by high vulnerability classes, while the middle part was characterized by moderate vulnerability classes. Based on the vulnerability analysis, it was found that 2% and 39% of BCA is under low and high vulnerability to groundwater contamination, respectively, while more than 52% and 5% of the area of BCA can be designated as an area of moderate and very high vulnerability to groundwater contamination, respectively. The GIS technique has provided an efficient environment for analyses and high capabilities of handling a large amount of spatial data.     

Effects of 5-year application of municipal solid waste compost on the distribution and mobility of heavy metals in a Tunisian calcareous soil

It is obvious that the application of solid waste compost improves the soil fertility. These wastes, however, may also have some negative effects on the agricultural environment due to their metal content. This research aimed at evaluating the influence of Tunisian municipal solid waste compost and farmyard manure on some chemical properties and the distribution of heavy metals in a calcareous Tunisian soil (clayey–loamy soil). A field plot experiment, without vegetation, was installed since 1999 at the experimental farm of the Agronomic National Institute of Tunis (INAT) in the region of Mornag (20 km south of Tunis, Tunisia). During 5 years, the field received yearly the following treatments: 0, 40, 80 and 120 t/ha of municipal solid waste compost and 0, 40 and 120 t/ha of manure. The fractionation of heavy metals in the soil was evaluated after 5 years using a sequential extraction procedure. The application of the two amendments was found to increase the content of organic matter, the total nitrogen content and the electrical conductivity, whereas it slightly decreased the soil pH. The addition of manure did not have a significant effect on the accumulation of heavy metals in the soil, whereas compost application increased the total concentration of heavy metals in the soil. The distribution of heavy metals between the different fractions in untreated and treated soils showed the residual fraction to be dominant, followed by the fraction bound to Fe and Mn oxides. The amount of Cu bound to the organic fraction increased with the application rate, which is probably caused by the formation of organic complexes. For the other metals, the increase of the association with organic matter is very limited. The application of compost moreover increases the amount of Zn associated with Fe and Mn oxides. The “Mobility Factor (MF)” was quite low and did not change after the 5-year application of the two organic amendments. It always remained lower than 10%, although for Cd it amounted to 17%.     

Mango performance as affected by the soil application of zeolite and biochar under water salinity stresses

This study was carried out during two consecutive seasons, 2020 and 2021, on 12-year-old mango (Mangifera indica L.). cv. Ewaise grown in region Idku, El Beheira Governorate, Egypt. The trees were planted at 5?×?4 m apart and grafted on “Sokary” root stock to study the influence of zeolite and biochar on growth, yield, and fruit quality of “Ewaise” mango cultivar irrigated by agricultural drainage water. The trees were treated by the following treatments: zeolite or biochar solely at 1, 2, and 3 kg for tree and their different combinations such as 1 kg zeolite?+?1 kg biochar; 1 kg zeolite?+?2 kg biochar; 1 kg zeolite?+?3 kg biochar; 2 kg zeolite?+?1 kg biochar; 2 kg zeolite?+?2 kg biochar; 2 kg zeolite?+?3 kg biochar; 3 kg zeolite?+?1 kg biochar; 3 kg zeolite?+?2 kg biochar; and 3 kg zeolite?+?3 kg biochar as well as control zero soil application. The obtained results showed that the soil application of zeolite or biochar gave a positive effect on improving the soil characteristics which reflects on the tree trunk thickness, shoot length and thickness, number of inflorescences, yield in kg per tree, and fruit quality. The greatest positive effect on the previous mentioned parameters was obtained by the combined application of the soil application of 2 kg zeolite?+?3 kg biochar; 2 kg zeolite?+?2 kg biochar; 3 kg zeolite?+?2 kg biochar; and 3 kg zeolite?+?3 kg biochar over the rest-applied treatments or control in the two seasons.