The pollution halo effect of technology spillover and pollution haven effect of economic growth in agricultural foreign trade: two sides of the same coin?

Environmental Science and Pollution Research - The existing literature on the environmental Kuznets curve (EKC) fails to investigate the spatial attribute of the “pollution halo” effect...     

Lithium extraction from salt lake brines with high magnesium/lithium ratio: a review

Environmental Chemistry Letters - The demand for lithium is growing rapidly with the increase in electric vehicles, batteries and electronic equipments. Lithium can be extracted from brines, yet...     

环境保护职业教育校企合作的难点与对策

环保职业教育校企合作中存在深度和广度不够、政府主导作用没有充分发挥、环保职业院校努力不够、企业热情不高等问题,这些问题出现的根本原因有环保工作自身的特殊性,环保职业教育与行业发展疏离和高校毕业生就业岗位下沉等。充分发挥政府主导作用和环保行指委平台作用是解决问题、破解难点的关键,政府制定完善的政策法规是重中之重。"政、校、企"三方合作并建立完善的运行机制是我国环保职业教育校企合作有效开展的良策。     

贸易自由化对我国环境的影响——基于ACT模型的实证研究

近年来我国对外贸易发展迅速，但伴随而来的环境污染问题也越来越严重。学术界对我国贸易与环境问题进行了多方面研究，但并未得到一致的结论。文参考ACT模型，试图将贸易自由化对我国环境的影响从经济发展对我国环境的整体效应中分离出来进行研究。本文采用panel数据对我国1992-2004年期间贸易自由化的环境效应进行了实证分析，结果表明：贸易自由化对我国环境消极的规模效应和结构效应远远超过了积极的技术效应，即贸易自由化使我国环境恶化。这主要归因于我国粗放型的经济增长方式以及不完善的环境法规。要改善其不利影响，我国应采用法律和经济措施相结合的办法，从而达到减少贸易的规模效应、改变现有贸易结购以及加强其技术效应的目的。     

金属加工过程中应力状态的分析方法

分析简单地拉伸、压缩和扭转的情况时,应力状态能容易地被确定.但是,实际上在金属加工过程中材料是承受复杂的应力状态,在模具——工件接触面上增加有摩擦力.而且,这些应力和摩擦力一般地沿着接触面变化.准确的计算或预测载荷、力、应力和温度,不但对设计适宜的设备是重要的,而且对研究工艺期间材料的变化过程也是重要的.本文将讨论材料变形过程中所运用的主要分析方法及其优缺点.     

北京水灾及其社会影响

北京在历史上曾发生多次重大水灾,给人民生命财产、城市建设及社会安定带来了巨大影响。形成水灾的主要因素是永定河决口泛溢和区域雨涝。现从大量的历史文献中列举几个实例,来看水灾的严重程度及其影响后果。     

基于时序NDVI数据的鄱阳湖流域常绿覆被季节性变化特征

选择位于红壤丘陵区的鄱阳湖流域作为研究对象，利用1 km×1 km分辨率的时序SPOT4 VEGETATION数据，对流域内典型土地覆被--常绿覆被的绿度值、峰值、谷值、年均NDVI(NDVI-I)和NDVI年内极差(NDVI MM)等特征值进行了提取。在此基础上，探讨了不同常绿覆被类型的NDVI指数年内季节变化规律。结果表明：时序NDVI指数基本上能够较好地刻画不同常绿覆被类型之间的差异性，植被指数NDVI特征值随覆被的类型及其生长状态有规律地变化，即NDVI年均值和最小值基本上按“常绿阔叶林＞常绿针阔叶混交林＞常绿针叶林＞常绿针叶-落叶混交林”的顺序变化；典型常绿阔叶林的NDVI指数年内变化曲线基本上没有大的起伏波动；常绿针叶林以及常绿针阔叶混交林占主导地位的常绿混交林NDVI指数年内变化比较和缓，但常在8月和11月有所波动；以常绿针叶林为主、但有较多落〖JP2〗叶林混杂其中的常绿混交林，其NDVI指数年内变化曲线基本上呈和缓的单峰型波动。     

Preparation of hydrophobic hierarchical pore carbon–silica composite and its adsorption performance toward volatile organic compounds

Carbon–silica materials with hierarchical pores consisting of micropores and mesopores were prepared by introducing nanocarbon microspheres derived from biomass sugar into silica gel channels in a hydrothermal environment.The physicochemical properties of the materials were characterized by nitrogen physical adsorption(BET),scanning electron microscopy(SEM),and thermogravimetric(TG),and the adsorption properties of various organic waste gases were investigated.The results showed that microporous carbon materials were introduced successfully into the silica gel channels,thus showing the high adsorption capacity of activated carbon in high humidity organic waste gas,and the high stability and mechanical strength of the silica gel.The dynamic adsorption behavior confirmed that the carbon–silica material had excellent adsorption capacity for different volatile organic compounds(VOCs).Furthermore,the carbon–silica material exhibited excellent desorption characteristics:adsorbed toluene was completely desorbed at 150℃,thereby showing superior regeneration characteristics.Both features were attributed to the formation of hierarchical pores.     

Phosphate recovery with granular acid-activated neutralized red mud: Fixed-bed column performance and breakthrough curve modelling

Granular acid-activated neutralized red mud (AaN-RM) has been successfully prepared with good chemical stability and physical strength. However, its potential for industrial application remains unknown. Therefore, the performance of granular AaN-RM for phosphate recovery in a fixed-bed column was investigated. The results demonstrated that the phosphate adsorption performance of granular AaN-RM in a fixed-bed column was affected by various operational parameters, such as the bed depth, flow rate, initial solution pH and initial phosphate concentration. With the optimal empty-bed contact time (EBCT) of 24.27 min, the number of processed bed volumes and the phosphate adsorption capacity reached 496.95 and 84.80 mg/g, respectively. Then, the saturated fixed-bed column could be effectively regenerated with a 0.5 mol/L HCl solution. The desorption efficiency remained as high as 83.45% with a low weight loss of 3.57% in the fifth regeneration cycle. In addition, breakthrough curve modelling showed that a 5-9-1 feed-forward artificial neural network (ANN) could be effectively applied for the optimization of the fixed-bed adsorption system; the coefficient of determination (R²) and the root mean square error (RMSE) evaluated on the validation-testing data were 0.9987 and 0.0183, respectively. Therefore, granular AaN-RM fixed-bed adsorption exhibits promising potential for phosphate removal and recovery from polluted water.     

Acceleration of floc-water separation and floc reduction with magnetic nanoparticles during demulsification of complex waste cutting emulsions

Waste cutting emulsions are difficult to treat efficiently owing to their complex composition and stable emulsified structure. As an important treatment method for emulsions, chemical demulsification is faced with challenges such as low flocs–water separation rates and high sludge production. Hence, in this study, Fe₃O₄ magnetic nanoparticles (MNPs) were used to enhance chemical demulsification performance for treating waste cutting emulsions under a magnetic field. The addition of MNPs significantly decreased the time required to attain sludge–water separation and sludge compression equilibrium, from 210 to 20 min. In addition, the volume percentage of sludge produced at the equilibrium state was reduced from 45% to 10%. This excellent flocculation–separation performance was stable over a pH range of 3–11. The magnetization of the flocculants and oil droplets to form a flocculant–MNP–oil droplet composite, and the magnetic transfer of the composite were two key processes that enhanced the separation of cutting emulsions. Specifically, the interactions among MNPs, flocculants, and oil droplets were important in the magnetization process, which was controlled by the structures and properties of the three components. Under the magnetic field, the magnetized flocculant–MNP–oil droplet composites were considerably accelerated and separated from water, and the sludge was simultaneously compressed. Thus, this study expands the applicability of magnetic separation techniques in the treatment of complex waste cutting emulsions.