Lithium extraction from salt lake brines with high magnesium/lithium ratio: a review

Environmental Chemistry Letters - The demand for lithium is growing rapidly with the increase in electric vehicles, batteries and electronic equipments. Lithium can be extracted from brines, yet...     

重庆市2009～2018年工业用地供应规模时空特征分析

工业用地供应行为的演化是工业经济发展的重要体现,分析工业用地供应规模的时空变化特征,有利于推进土地供给侧结构性改革,促进工业高质量发展,优化国土空间格局.基于重庆市2009～2018年工业用地供应公告数据,建立重庆市工业用地供应数据库,运用基尼系数、核密度分布、冷热点分析和趋势面分析方法,分析重庆市工业用地供应规模的时空变化规律.结果 表明:(1)重庆市工业用地供应规模总体上处于波动下降趋势,供应的区位呈现较为明显的东北-西南方向分布.区位基尼系数具有波动性特征,市域和分区都在空间分布不均衡和均衡间反复.(2)工业用地供应点规模呈现出“主环-斑点”式空间布局模式,高密度核心逐渐向主城区中心聚集.供应规模的热点区县在主城区的东西两侧变动,冷点区集中在渝东北角.(3)重庆市的中心城区及其西部和南部具有较大的工业用地供应规模,为建设成渝地区双城经济圈奠定了较好基础.     

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

冻融循环作用下尾矿砂抗剪强度和变形特性研究

为探究冻融循环后尾矿物理力学特性的变化特征,使用高低温试验箱和应变控制式三轴剪力仪对处于不同初始条件下的尾矿砂进行不排水不固结试验,揭示了尾矿砂的抗剪强度参数、不同围压条件下的变形模量与冻融循环次数、含水率之间的关系。结果表明:相同含水率条件下,随冻融循环次数增加,尾矿砂黏聚力先减小后趋于稳定,内摩擦角先增大后减小,围压100 k Pa和200 k Pa时变形模量逐渐减小,围压300 k Pa时变形模量呈现先减小后缓慢增大的趋势;相同冻融循环次数条件下,随尾矿砂含水率增加,其黏聚力先增加后减小、内摩擦角不断减小;不同围压条件下变形模量在总体上均呈现出不断减小的变化趋势,围压200 k Pa时变形模量总的衰减量最大,100k Pa次之,300 k Pa最小。     

河口切变锋引起的滩槽泥沙交换效应

切变锋是河口湾锋系中最为常见和最易观察到的锋面类型。本文对长江口的切变锋进行现场观察和滩，槽同步水文资料分析，简述了长江口切变锋发生的部分和基本特性，提出了切变锋引起的滩，槽泥沙呈现螺旋形交换形式等论点。     

The ageing effect on the bioaccessibility and fractionation of arsenic in soils from China

Ingestion of contaminated soil has been recognized as an important exposure pathway of arsenic for humans, especially for children through outdoor hand-to-mouth activities. An improved sequential extraction procedure was employed in an attempt to reveal the relationship between bioaccessibility and fractionation of As in five soils from China. Arsenic bioaccessibility in acidic ( approximately pH 4.5) soils reached approximately stable levels after a sharp decline within one week of ageing. In contrast, As bioaccessibility in higher pH (>6.0) soils was found to be significantly higher and took two weeks of ageing to reach stable levels. The artificially added As was more labile than indigenous As. The main proportions of added As were found in the specifically sorbed and amorphous and poorly-crystalline hydrous Fe/Al oxide-bound fractions. Correlation analysis shows that the non-specifically and specifically sorbed As are likely to constitute the main proportion of bioaccessible soil As. The soil content of amorphous and crystalline Fe/Al oxides and soil pH appear to be the key factors controlling, not only the time needed to reach a steady state, but also the magnitude of the bioaccessibility of As added to the soils.     

锌精炼铅塔燃烧系统烟气温度模糊控制研究

针对锌精馏铅塔动态过程中的非线性、非最小相位特征、不稳定性、时滞和负荷干扰,基于模糊控制策略下给出了锌精馏铅塔燃烧系统新的控制方法.运用模糊控制系统对锌精馏铅塔的烟气温度进行仿真研究和实时控制结果表明,该研究所设计的模糊控制器能够克服许多干扰因素,产生了良好的控制效果.     

Active capping demonstration in the Anacostia river,Washington, D.C.

An active capping demonstration project in Washington, D.C., is testing the ability to place sequestering agents on contaminated sediments using conventional equipment and evaluating their subsequent effectiveness relative to conventional passive sand sediment caps. Selected active capping materials include: (1) AquaBlokTM, a clay material for permeability control; (2) apatite, a phosphate mineral for metals control; (3) coke, an organic sequestration agent; and (4) sand material for a control cap. All of the materials, except coke, were placed in 8,000‐ft test plots by a conventional clamshell method during March and April 2004. Coke was placed as a 1.25‐cm layer in a laminated mat due to concerns related to settling of the material. Postcap sampling and analysis were conducted during the first, sixth, and eighteenth months after placement. Although postcap sampling is expected to continue for at least an additional 24 months, this article summarizes the results of the demonstration project and postcap sampling efforts up to 18 months. Conventional clamshell placement was found to be effective for placing relatively thin (six‐inch) layers of active material. The viability of placing high‐value or difficult‐to‐place material in a controlled manner was successfully demonstrated with the laminated mat. Postcap monitoring indicates that all cap materials effectively isolated contaminants, but it is not yet possible to differentiate between conventional sand and active cap layer performance. Monitoring of the permeability control layer indicated effective reductions in groundwater seepage rates through the cap, but also showed the potential for gas accumulation and irregular release. All of the cap materials show deposition of new contaminated sediment onto the surface of the caps, illustrating the importance of source control in maintaining sediment quality. © 2006 Wiley Periodicals, Inc.     

Thermal conversion of rice husks and sawdust to liquid fuel

The paper focuses on studying the conversion of rice husks and sawdust into liquid fuel. Rice husks, sawdust and their mixture are pyrolyzed at temperatures between 420 and 540 degrees C, and the main product of liquid fuel is obtained. The experimental result shows that the yield of liquid fuel depends on various factors such as feedstock and temperature. The maximum yields for rice husks, sawdust and their mixture are 56%, 61% and 60% at 465, 490 and 475 degrees C, respectively. Analyses with GC-MS and other apparatus show that the liquid fuel is a complicated compound with low caloric value and can be directly used as a fuel oil for combustion in a boiler or a furnace without any upgrading. Alternatively, the fuel can be refined to be used by vehicles.