Formation of indoor nitrous acid (HONO) by light-induced NO<Subscript>2</Subscript> heterogeneous reactions with white wall paint

Gaseous nitrogen dioxide (NO₂) represents an oxidant that is present in relatively high concentrations in various indoor settings. Remarkably increased NO₂ levels up to 1.5 ppm are associated with homes using gas stoves. The heterogeneous reactions of NO₂ with adsorbed water on surfaces lead to the generation of nitrous acid (HONO). Here, we present a HONO source induced by heterogeneous reactions of NO₂ with selected indoor paint surfaces in the presence of light (300 nm?<?λ?<?400 nm). We demonstrate that the formation of HONO is much more pronounced at elevated relative humidity. In the presence of light (5.5 W m^?2), an increase of HONO production rate of up to 8.6?·?10⁹ molecules cm^?2 s^?1 was observed at [NO₂]?=?60 ppb and 50 % relative humidity (RH). At higher light intensity of 10.6 (W m^?2), the HONO production rate increased to 2.1?·?10¹⁰ molecules cm^?2 s^?1. A high NO₂ to HONO conversion yield of up to 84 % was observed. This result strongly suggests that a light-driven process of indoor HONO production is operational. This work highlights the potential of paint surfaces to generate HONO within indoor environments by light-induced NO₂ heterogeneous reactions.     

Identification of organic extractables from commercial resin-modified glass-ionomers using HPLC-MS

Elution of organic compounds from resin-based dental fillings during their application in the human mouth environment may have a potential impact on the human health. Ethanol, water and other solvents very often present in the human mouth have the ability to penetrate dental fillings placed in the human tooth. Penetration of liquids into the tooth may lead to the liberation of unreacted dental filling ingredients or their degradation products. Determination of these compounds is necessary for better knowledge from possible harmful effects caused by dental fillings. The aim of this study was the isolation and identification of compounds released from resin-modified glass-ionomer cements (RMGICs), resin-based dental materials applied in dentistry. Compounds were extracted from fillings by using four solvents (40% ethanol, water, 1% acetic acid and artificial saliva). Liquid samples containing eluted compounds were then extracted, evaporated and analyzed by using of HPLC-MS (high-performance liquid chromatography-mass spectrometry) and HPLC-DAD (high-performance liquid chromatography-diode array detection) techniques. Almost thirty components (monomers and additives) of RMGICs were identified. The main identified extractables were: Bis-GMA (bisphenol A glycidyl dimethacrylate), Bis-EMA (ethoxylated bisphenol A dimethacrylate), UDMA (urethane dimethacrylate), TEGDMA (triethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate) as monomers and diphenyliodonium chloride, camphorquinone (initiators), BHA (inhibitor), 4-(dimethylamino) ethyl benzoate (co-initiator) as additives.     

Identification of volatiles from Pinus silvestris attractive for Monochamus galloprovincialis using a SPME-GC/MS platform

Introduction

A myriad of volatile organic compounds (VOCs) released by terrestrial vegetation plays an important role in environmental sciences. A thorough chemical identification of these species at the molecular level is essential in various fields, ranging from atmospheric chemistry to ecology of forest ecosystems. In particular, the recognition of VOCs profiles in a context of plant?Cinsect communication is a key issue for the development of forest protection tools.

Purpose

This work was aimed at the development of a simple, robust and reliable method for the identification of volatiles emitted from plant materials, which can attract or deter pest insects. Specifically, volatiles emitted from the bark of Pinus sylvestris were studied, which might attract the black pine sawyer beetle Monochamus galloprovincialis??a serious pest of the tree and a vector of a parasitic nematode Bursaphelenchus xylophius.

Method

The volatiles from bark samples were collected using a solid-phase micro-extraction technique, and subsequently analysed by gas-chromatography/mass-spectrometry (GC/MS). The characterisation of the volatile fraction was based on the comparison with data in mass spectral libraries, and in most cases, with the available authentic standards. The identified compounds were screened against the available entomological data to select insect attractors.

Results

The identified components included terpenes (??-pinene, ?-3-carene, and para-cymenene), oxygenated terpenes (??-terpineol and verbenone), sesquiterpenes (??-longipinene, longifolene, E-??-farnesene, ??-cadinene and pentadecane), and diterpenes (manoyl oxide and (+)-pimaral). Of these, longifolene and (+)-pimaral are of particular interest as plausible attractors for the M. galloprovincialis beetle that might find application in the construction of insect bait traps.     

Evaluation of the reaction artifacts in an annular denuder-based sampler resulting from the heterogeneous ozonolysis of naphthalene

The heterogeneous ozonolysis of naphthalene adsorbed on XAD-4 resin was studied using an annular denuder technique. The experiments involved depositing a known quantity of naphthalene on the XAD-4 resin and then measuring the quantity of the solid naphthalene that reacted away under a constant flow of gaseous ozone (0.064 to 4.9 ppm) for a defined amount of time. All experiments were performed at room temperature (26 to 30 °C) and atmospheric pressure. The kinetic rate coefficient for the ozonolysis reaction of naphthalene adsorbed on XAD-4 resin is reported to be (10.1?±?0.4)?×?10^?19 cm³ molecule^?1 s^?1 (error is 2σ, precision only). This value is five times greater than the currently recommended literature value for the homogeneous gas phase reaction of naphthalene with ozone. The obtained rate coefficient is used to evaluate reaction artifacts from field concentration measurements of naphthalene, acenaphthene, and phenanthrene. The observed uncertainties associated with field concentration measurements of naphthalene, acenaphthene, and phenanthrene are reported to be much higher than the uncertainties associated with the artifact reactions. Consequently, ozone reaction artifact appears to be negligible compared to the observed field measurement uncertainty results.     

A Method of Mercury Removal from Topsoil Using Low-Thermal Application

Mercury contamination in the environment is problematic due to the unusual physical properties and well-recognized toxicity of this common metal. The bioavailability of mercury depends strongly on its chemical speciation. Anthropogenic mercury and its compounds appear in soil as hot spots located close to industrial facilities that used or produced mercury. The nature of the chemical production process, transportation and disposal practices often determined the chemical composition and distribution of mercury in the surrounding soils. Current ex situ soil remediation methods are expensive, produce undesirable side effects to the environment and usually involve transportation of contaminated soil.In this project, sponsored by the U.S. Department of Energy, a low-cost, simple approach to removing mercury from soil was evaluated. The process uses low-temperature thermal desorption of volatile metallic mercury and its compounds, and subsequent vapor capture.The project consisted of laboratory and plot-scale experiments. The laboratory efforts evaluated theoretical calculations of mercury removal as a function of time and temperature. The plot-scale experiment was a practical application of the laboratory results. For both experiments, mercury-polluted soil was obtained from a chemical production facility located in southern Poland. In laboratory experiments, at temperature 373 K total mercury concentration decreased in soil by nearly 32%. In plot-scale experiments, at temperature 440 K, about 60–70% of total mercury was removed from the soil.At the end of the experiment, a test of soil biological activity was performed to check if the high temperature applied to the soil did not impair the soil growth properties. There was no negative effect of temperature found.     

Comparison of annual dry and wet deposition fluxes of selected pesticides in Strasbourg, France

This work summarizes the results of a study of atmospheric wet and dry deposition fluxes of Deisopropyl-atrazine (DEA), Desethyl-atrazine (DET), Atrazine, Terbuthylazine, Alachlor, Metolachlor, Diflufenican, Fenoxaprop-p-ethyl, Iprodione, Isoproturon and Cymoxanil pesticides conducted in Strasbourg, France, from August 2000 through August 2001. The primary objective of this work was to calculate the total atmospheric pesticide deposition fluxes induced by atmospheric particles. To do this, a modified one-dimensional cloud water deposition model was used. All precipitation and deposition samples were collected at an urban forested park environment setting away from any direct point pesticide sources. The obtained deposition fluxes induced by atmospheric particles over a forested area showed that the dry deposition flux strongly contributes to the total deposition flux. The dry particle deposition fluxes are shown to contribute from 4% (DET) to 60% (cymoxanil) to the total deposition flux (wet + dry).     

Human health risk assessment case study: an abandoned metal smelter site in Poland

United States Environmental Protection Agency methodologies for human health risk assessment (HRA) were applied in a Brownfields Demonstration Project on the Warynski smelter site (WSS), an abandoned industrial site at Piekary Slaskie town, Upper Silesia, Poland. The HRA included the baseline risk assessment (BRA) and the development of risk-based preliminary remedial goals (RBPRGs). The HRA focused on surface area covered with waste materials, which were evaluated with regard to the potential risks they may pose to humans. Cadmium, copper, iron, manganese, lead, and zinc were proposed as the contaminants of potential concern (COPCs) at WSS based on archive data on chemical composition of waste located on WSS. For the defined future land use patterns, the industrial (I) and recreational (II) exposure scenarios were assumed and evaluated. The combined hazard index for all COPCs was 3.1E+00 for Scenario I and 3.2E+00 for Scenario II. Regarding potential carcinogenic risks associated with the inhalation route, only cadmium was a contributor, with risks of 1.6E-06 and 2.6E-07 for Scenario I and Scenario II, respectively. The results of the BRA indicated that the potential health risks at WSS were mainly associated with waste material exposure to cadmium (industrial and recreational scenarios) and lead (industrial scenario). RBPRGs calculated under the industrial scenario were 1.17E+03 and 1.62E+03 mg/kg for cadmium and lead, respectively. The RBPRG for cadmium was 1.18E+03 mg/kg under the recreational scenario. The BRA results, as well as RBCs, are comparable for both scenarios, so it is impossible to prioritize land use patterns for WSS based on these results. For choosing a future land use pattern or an appropriate redevelopment option, different factors would be decisive in the decision-making process, e.g., social, market needs, technical feasibility and costs of redevelopment actions or acceptance of local community.     

Support Vector Machine Modeling Using Particle Swarm Optimization Approach for the Retrieval of Atmospheric Ammonia Concentrations

This study was performed in order to improve the estimation accuracy of atmospheric ammonia (NH₃) concentration levels in the Greater Houston area during extended sampling periods. The approach is based on selecting the appropriate penalty coefficient C and kernel parameter σ ². These parameters directly influence the regression accuracy of the support vector machine (SVM) model. In this paper, two artificial intelligence techniques, particle swarm optimization (PSO) and a genetic algorithm (GA), were used to optimize the SVM model parameters. Data regarding meteorological variables (e.g., ambient temperature and wind direction) and the NH₃ concentration levels were employed to develop our two models. The simulation results indicate that both PSO-SVM and GA-SVM methods are effective tools to model the NH₃ concentration levels and can yield good prediction performance based on statistical evaluation criteria. PSO-SVM provides higher retrieval accuracy and faster running speed than GA-SVM. In addition, we used the PSO-SVM technique to estimate 17 drop-off NH₃ concentration values. We obtained forecasting results with good fitting characteristics to a measured curve. This proved that PSO-SVM is an effective method for estimating unavailable NH₃ concentration data at 3, 4, 5, and 6 parts per billion (ppb), respectively. A 4-ppb NH₃ concentration had the optimum prediction performance of the simulation results. These results showed that the selection of the set-point values is a significant factor in compensating for the atmospheric NH₃ dropout data with the PSO-SVM method. This modeling approach will be useful in the continuous assessment of NH₃ sensor discrete data sources.     

Geographical location and key sensitivity issues of post-industrial regions in Europe

Primary objectives of our work were to spatially delineate post industrial areas of the EU-27 and indicate key environmental, social and economic sensitivity issues for these regions. The density of industrial sites within NUTS-x regions for EU-27 countries was assessed by using CORINE 2000 land cover layer. A development of postindustrial society in Europe represents a strong geographic diversity. There are distinct historical and current differences between regions which form major groups, comprising similar internal characteristics and definable trends in environmental and socioeconomic sense. Regions grouped into postindustrial clusters are fundamentally different from the European average, and are facing specific problems related to global market and political changes. Eastern postindustrial regions can be characterized as socially and economically weak, exhibiting high unemployment rate, low GDP, negative population growth and a strong environmental pressure, represented by a high density of dump sites. Most of the western EU postindustrial areas have been successfully recovered and moved into new economy as shown by most of the indicators. In urban postindustrial zones, however, emission sources of pollutants seem to continually be a major problem--not necessarily in terms of exceeding thresholds, but through a remarkable difference in the amount of pollutants produced relative to other regions.