Extraction of DNA from amniotic fluid cells for the early prenatal diagnosis of genetic disease

Ten-ml samples of amniotic fluid were taken from pregnancies being terminated at 8–14 weeks' gestation. DNA was extracted from the amniotic cells by sequential centrifugation and analysed using the polymerase chain reaction (PCR). Fifteen samples were analysed for evidence of maternal contamination using Mfd5 oligo-nucleotide primers for repeat polymorphisms. Ten amniotic fluid samples were tested for the Delta-F₅₀₈ deletion characteristic of cystic fibrosis to demonstrate a diagnostic application for the technique. In each case, DNA extracted from fetal tissue from the same pregnancy was included in the controls. In 14 of the 15 cases tested with the Mfd5 primers, both the amniotic fluid DNA and the fetal DNA showed no evidence of contaminating DNA. In one case, neither the amniotic fluid cells nor the fetal cells yielded results. In nine of the ten cases tested with the Delta-F₅₀₈ primers, the amniotic fluid cell DNA provided accurate information about the genetic status of the fetus; in the tenth, the fetal DNA failed to amplify. The results indicate that adequate DNA can be extracted from amniotic fluid from 8 weeks' gestation onward and these samples are suitable for prenatal diagnosis using PCR.     

Transient division of labor and behavioral specialization in the ant Formica schaufussi

Cooperative prey retrieval in the monomorphic ant Formica schaufussi is carried out by workers that perform functionally distinct roles which persist only for the duration of a single retrieval event. A forager (scout) that locates prey too large to retrieve individually organizes cooperative prey transport by recruiting nestmates (recruits) to assist in retrieval. The scout and recruit roles appear to be determined by whether a worker activates recruitment or is recruited from the nest. Scouts organize recruitment and play a key role in maintaining the cohesion of the retrieval group. If a scout that has initiated group transport is experimentally removed, the recruited workers composing the retrieval group typically abandon the prey and cooperative foraging is terminated. In this context, recruits are unable to function as scouts and reorganize group transport. Individuals marked as recruits in one prey retrieval, however, can switch and act as scouts in subsequent retrievals. Because the roles of individuals persist within but not between retrieval events, the specialization involved in cooperative prey retrieval cannot easily be explained as a response associated with age-related or genetic predispositions. This transient division-of-labor, in which individual roles may persist only for the duration of a single group action, represents a novel type of short-term individual specialization.     

Thermotolerant coliform loadings to coastal areas of Santa Catarina (Brazil) evidence the effect of growing urbanisation and insufficient provision of sewerage infrastructure

Thermotolerant coliform (TC) loadings were quantified for 49 catchments draining into the North and South Bays of Santa Catarina (SC, southeastern Brazil), an area known for its tourism and aquaculture. TC loadings were calculated based on flow measurements taken in 26 rivers. TC concentrations ere quantified based on surface water samples collected at 49 catchment outlets in 2012 and 2013. Median TC loads ranged from 3.7 × 10³ to 6.8 × 10⁸ MPN s^?1. TC loadings in the catchments increased in proportion to increases in resident human population, population density and percentage of urbanised area. Catchments with more than 60% of area covered by wastewater collection and treatment systems had higher TC loads per person than catchments with less than 25%. Based on the study catchments, these results indicate that current sewerage infrastructure is ineffective in reducing contamination of faecal origin to surface waters. These findings have important implications for the management of microbiological health hazards in bathing, recreational and shellfish aquaculture waters in the North and South Bays of Santa Catarina Island.     

Bioremediation assessment of diesel–biodiesel-contaminated soil using an alternative bioaugmentation strategy

This study investigated the effectiveness of successive bioaugmentation, conventional bioaugmentation, and biostimulation of biodegradation of B10 in soil. In addition, the structure of the soil microbial community was assessed by polymerase chain reaction-denaturing gradient gel electrophoresis. The consortium was inoculated on the initial and the 11th day of incubation for successive bioaugmentation and only on the initial day for bioaugmentation and conventional bioaugmentation. The experiment was conducted for 32 days. The microbial consortium was identified based on sequencing of 16S rRNA gene and consisted as Pseudomonas aeruginosa, Achromobacter xylosoxidans, and Ochrobactrum intermedium. Nutrient introduction (biostimulation) promoted a positive effect on microbial populations. The results indicate that the edaphic community structure and dynamics were different according to the treatments employed. CO₂ evolution demonstrated no significant difference in soil microbial activity between biostimulation and bioaugmentation treatments. The total petroleum hydrocarbon (TPH) analysis indicated a biodegradation level of 35.7 and 32.2 % for the biostimulation and successive bioaugmentation treatments, respectively. Successive bioaugmentation displayed positive effects on biodegradation, with a substantial reduction in TPH levels.     

Dehalogenation of polychlorinated biphenyls and polybrominated diphenyl ethers using a hybrid bioinorganic catalyst

The environmentally prevalent polybrominated diphenyl ether (PBDE) #47 and polychlorinated biphenyls (PCBs) #28 and #118 were challenged for 24 hours with a novel biomass-supported Pd catalyst (Bio-Pd(0)). Analysis of the products via GC-MS revealed the Bio-Pd(0) to cause the challenged compounds to undergo stepwise dehalogenation with preferential loss of the least sterically hindered halogen atom. A mass balance for PCB #28 showed that it is degraded to three dichlorobiphenyls (33.9%), two monochlorobiphenyls (12%), and biphenyl (30.7%). The remaining mass was starting material. In contrast, while PCB #118 underwent degradation to yield five tetra- and five trichlorinated biphenyls, no less chlorinated products or biphenyl were detected, and the total mass of degraded products was 0.3%. Although the Bio-Pd(0) material was developed for treatment of PCBs, a mass balance for PBDE #47 showed that the biocatalyst could prove a potentially useful method for treatment of PBDEs. Specifically, 10% of PBDE #47 was converted to identifiable lower brominated congeners, predominantly the tribrominated PBDE #17 and the dibrominated PBDE #4, 75% remained intact, while 15% of the starting mass was unaccounted for.     

The use of the removable thin film coating technique as an alternative to traditional decontamination methods to mitigate and abate hazardous particulates

This article summarizes a study that evaluated a new decontamination technique for the mitigation and abatement of hazardous dust and particulates. Traditional decontamination methods are time‐consuming, expensive, can create airborne hazards, and do not always bring the concentration of the contaminant to acceptable levels. The use of the removable thin film coating will increase efficiency, will not generate airborne hazards, will decrease costs, and, with one application, will bring the hazardous dust concentrations to acceptable levels. Qualitative tests demonstrated that the removable thin film coating reduced the amount of visible luminescent dust (a surrogate for hazardous dust) from various surfaces. It also indicated that wherever there were minute scratches, the coating did not remove all of the dust. However, the qualitative tests showed that this decontamination method worked well as a preventative method, protecting clean areas from becoming contaminated when exposed to the luminescent dust. Further investigation was conducted using a scanning electron microscope (SEM) and carbon dust. Overall, the SEM experiment demonstrated that there was a statistically significant (p = 0.00007) removal of carbon dust (less than 10 μm in size) from surfaces with crevasses larger than 3 μm. The SEM also revealed that there were some limitations where there were large clusters of carbon dust; in these instances, the coating would tear and remain on the sample surface. One method to resolve this limitation involved adding Kevlar^TM fibers to the removable thin film coating. It was thought that this would increase the strength of the coating and eliminate the coating from tearing when removing large clusters of a contaminant. Unfortunately, this did not alleviate the issue. The use of an engineered textile, saturated with the coating, appeared to eliminate the problem with the coating not being able to remove the contaminant from the minute surface scratches and improved the removal process of the coating. © 2008 Wiley Periodicals, Inc.     

Polybrominated diphenyl ethers in domestic indoor dust from Canada, New Zealand, United Kingdom and United States

Because of the similarities in European and North American dietary exposure, it has been suggested that the order of magnitude higher body burdens in North Americans may be due to international variations in exposure via ingestion of indoor dust. Furthermore, ingestion of indoor dust has been suggested as a possible source of PBDEs in the blood serum of New Zealanders. Hence, polybrominated diphenyl ethers (PBDEs) were measured in domestic indoor dust from: Amarillo/Austin, Texas, US; Birmingham, UK; Toronto, Canada; and Wellington, New Zealand. Concentrations of BDE 209 in two UK samples were - at 520,000 and 100,000 ng g(-1) - the highest ever recorded in a domestic (or office) indoor dust sample. Median concentrations in ng g(-1) were: in Canada 620 and 560 for Sigmatri-hexa-BDEs and BDE 209 respectively; in New Zealand 96, BDE 209 not determined; in the UK 59 and 2,800; and in the US 1600 and 1300. With respect to BDE 209, concentrations were in the order: UK approximately US>Canada. For Sigmatri-hexa-BDEs, the order of concentrations was US approximately Canada>New Zealand approximately UK. Combined with principal component analysis of congener patterns, this suggests that, while North American dusts are contaminated by both Deca- and Penta-BDE commercial formulations, UK dusts are contaminated predominantly by Deca-BDE. The Octa-BDE formulation appears of minimal importance in accordance with available market demand figures. Despite the commercial formulations of PBDEs never having been manufactured in, nor imported into New Zealand, their presence in dusts from that country suggests international trade in PBDE-containing goods is an important pathway effecting their global distribution.     

Organisational learning and continuous improvement of health and safety in certified manufacturers

Certified management systems have increasingly been applied by firms in recent decades and now cover the management of health and safety, principally through the OHSAS 18001 standard. In order to become certified, firms must not only observe the relevant legislation, but also improve performance and raise goals within health and safety on a continuous basis. The article examines how certified occupational and health management systems influence this process to evaluate how far they hinder or support learning. It presents a model with which it is possible to identify and analyse improvement processes. The model is applied to five cases from a qualitative study of Danish manufacturers with certified health and safety management systems. The cases illustrate the wide variation in health and safety management among certified firms.Certification is found to support lower levels of continuous improvement performance in handling health and safety issues. However, more advanced improvement practices are shown to be connected to the integration of health and safety in other managerial areas, as well as to the employment of similar advanced improvement processes within firms. The article argues that certified health and safety management does not obstruct learning, and can support advanced learning. Improvement practices with regard to health and safety are mainly dependent upon the firm’s overall organisational processes and do not automatically arise from the standard alone.