Estimation of soil specific surface area using some mechanical properties of soil by artificial neural networks

Soil specific surface area (SSA) is an important property of soil. Depending on the measurement techniques, determination of the SSA is costly and time consuming. Hence, a limited number of studies have been conducted to predict the SSA from the soil variables. In this study, the soil samples were taken from the literature. Fractal parameters (FP) were calculated by the model of Bird et al. (European Journal of Soil Science 51, 55–63, 2000) used as the input variables to predict the SSA. Some studies have been carried out on the prediction capability of the different parameters using the artificial neural networks (ANNs). The ANNs were further used and 20 models were developed to investigate the value of input variables to predict the SSA. The results showed that the PTF13 (RMSE?=?0.13) and PTF18 (RMSE?=?0.13) with the input variables of particle-size distribution and Atterberg limits revealed better performance than the other PTFs (in the training step). It is because of the fact that free swelling index (FSI) and Atterberg limits were closely correlated to the soil clay mineralogy as one of the important factors controlling the SSA. In general, this results demonstrated that the PTF9 with the variables of sand, clay, plastic limit (PL), liquid limit (LL), and FSI showed the best (RMSE?=?0.37) results in the estimation of the SSA. In conclusion, there was not a strong correlation between the soil mechanical properties and SSA but also ANNs were a suitable method to predict the SSA from the soil variables.     

An observational study of child safety seat use in an international safe community: Tehran,Iran

Objective: Despite strong evidence of the effectiveness of child safety seats in reducing injuries, the use of these devices in some communities is still rare. The purpose of this study was to determine the prevalence of child safety seat use and the factors influencing its use in the safe community of Tehran.

Methods: This roadside observational study was conducted in 2015 and 2,178 personal cars with a child under 12 years aboard were observed on Tehran's streets in regard to use of child safety seats. Other variables such as the gender of the driver, driver's age group, type of street, region of municipality, time of day, and day of the week were also collected.

Results: Prevalence of child safety seat use was 4.3% and was significantly higher among women drivers, on freeways, and in municipal regions 1, 4, and 7.

Conclusions: The prevalence of child safety seat use in Tehran as a most populous member of the international safe community was very low and most children commuted in insecure situations in the vehicle. Therefore, it is proposed that plans should be made to increase the use of child safety seats in international safe communities.     

Seasonal trend and source identification of polycyclic aromatic hydrocarbons associated with fine particulate matters (PM2.5) in Isfahan City,Iran, using diagnostic ratio and PMF model

Environmental Science and Pollution Research - Particulate matters (PMs) and their associated chemical compounds such as polycyclic aromatic hydrocarbons (PAHs) are important factors to evaluate...     

Chloramine demand estimation using surrogate chemical and microbiological parameters

A model is developed to enable estimation of chloramine demand in full scale drinking water supplies based on chemical and microbiological factors that affect chloramine decay rate via nonlinear regression analysis method. The model is based on organic character (specific ultraviolet absorbance (SUVA)) of the water samples and a laboratory measure of the microbiological (F m ) decay of chloramine. The applicability of the model for estimation of chloramine residual (and hence chloramine demand) was tested on several waters from different water treatment plants in Australia through statistical test analysis between the experimental and predicted data. Results showed that the model was able to simulate and estimate chloramine demand at various times in real drinking water systems. To elucidate the loss of chloramine over the wide variation of water quality used in this study, the model incorporates both the fast and slow chloramine decay pathways. The significance of estimated fast and slow decay rate constants as the kinetic parameters of the model for three water sources in Australia was discussed. It was found that with the same water source, the kinetic parameters remain the same. This modelling approach has the potential to be used by water treatment operators as a decision support tool in order to manage chloramine disinfection.     

Root responses to soil Ni heterogeneity in a hyperaccumulator and a non-accumulator species

We compared root responses of the Ni-hyperaccumulator plant Berkheya coddii Rossler with the non-accumulator plant Cicer arietinum L. to Ni heterogeneity in soil. We grew plants in growth containers filled with control soil, homogeneously spiked, and heterogeneously spiked soil with Ni concentrations of 62 and 125 mg kg^?1. Neutron radiography (NR) was used to observe the root distribution and the obtained images were analysed to reveal the root volumes in the spiked and unspiked segments of the growth container. There was no significant difference in root distribution pattern of B. coddii among different concentrations of Ni. Unlike B. coddii, the roots of C. arietinum initially grew into the spiked segments. However, the later developing roots did not penetrate the spiked segment suggesting an avoidance strategy. Our results indicate that, B. coddii does not forage towards the Ni-rich patches, although presence of Ni in soil changes its root morphology.     

Reliable method for prediction of the flash point of various classes of amines on the basis of some molecular moieties for safety measures in industrial processes

This work presents a novel, reliable and simple method of estimating the flash point of various types of flammable amines, which are important for safety measures in industrial processes. Different amines include aliphatic amines such as primary, secondary, tertiary and cyclic amines as well as aromatic amines and hetero arenes containing nitrogen heteroatom. The proposed correlation is based on the contribution of some specific molecular moieties and functional groups, which can easily be used for any types of amines. Intermolecular forces are important in the new method, which are counted by two increasing and decreasing parameters. The root mean square (rms) deviation is 18 K for different classes of amines including 133 diverse compounds. The estimated flash points have been compared with one of the best available predictive methods, which gives much lower value of the rms deviation.     

Adaptation strategies for maize cultivation under climate change in Iran: irrigation and planting date management

Climate change is affecting the productivity of crops and their regional distribution. Strategies to enhance local adaptation capacity are needed to mitigate climate change impacts and to maintain regional stability of food production. The objectives of this study were to simulate the climate change effects on phenological stages, Leaf Area Index (LAI), biomass and grain yield of maize (Zea mays L.) in the future and to explore the possibilities of employing irrigation water and planting dates as adaptation strategies to decrease the climate change impacts on maize production in Khorasan Razavi province, Iran. For this purpose, we employed two types of General Circulation Models ((United Kingdom Met. Office Hadley Center: HadCM3) and (Institute Pierre Simon Laplace: IPCM4)) and three scenarios (A1B, A2 and B1). Long Ashton Research Station-Weather Generator (LARS-WG) was used to produce daily climatic parameters as one stochastic growing season for each projection period. Also, crop growth under projected climate conditions was simulated based on the Cropping System Model (CSM)-CERES-Maize. The results of model evaluation showed that LARS-WG had appropriate prediction for climatic parameters. Time period from cultivation until anthesis and maturity were reduced in majority of scenarios as affected by climate change. The results indicated that the grain yield of maize may be reduced (11 % to 38 %) as affected by climate change based on common planting date in baseline and changed (?61 % to 48 %) in response to different irrigation regimes in the future climate change, under all scenarios and times. In general, earlier planting date (1 May) and decreasing irrigation intervals in the anthesis stage (11 applications) caused higher yield compared with other planting dates due to adaption to high temperature. Based on our findings, it seems that management of irrigation water and planting dates can be beneficial for adaptation of maize to climate change in this region.     

Spindle speed variation and adaptive force regulation to suppress regenerative chatter in the turning process

Chatter suppression in machining processes results in more material removal rate, high precision and surface quality. In this paper, two control strategies are developed to suppress chatter vibration in the turning process including a worn tool. In the first stage, a sinusoidal spindle speed variation around the mean speed is modulated to disturb the regenerative mechanism. The optimal amplitudes of the speed modulations are found based on a genetic algorithm such that the input energy to the turning process is minimized. In the second stage, to improve the response of the system which is associated with small ripples under the steady state condition, an adaptive controller is designed. In this stage, the provided external force (e.g., by a piezo-actuator) is the input variable. Results are provided for each control strategy. It is shown that if both control approaches are applied simultaneously, chatter vibration is suppressed in less time without any ripples at the steady state condition.     

Removal of acid yellow 36 using Box–Behnken designed photoelectro-Fenton: a study on removal mechanisms

Photoelectro-Fenton was applied for the removal of acid yellow 36 (AY36) from synthetic aqueous solution using iron electrodes. A Box–Behnken design was used for optimization of the effects of pH, H₂O₂ concentration, current density, and reaction time. Individual effects of these variables were more important than their interaction effects. The derived model was in good agreement with the experimental results. Total organic carbon was determined in solution and sludge in order to clarify the removal mechanism. Increase of H₂O₂ concentration and current density led to domination of oxidation and coagulation mechanisms, respectively. The effects of scavenging and inhibiting agents were also investigated: (1) presence of alcohols can reduce the efficiency through competition with dye for reaction with hydroxyl radicals; (2) anions (NO₃^?, HCO₃^?, and H₂PO₄^?) scavenged hydroxyl radicals and reduced decolorization of AY36.