Optimization of compost fermentation of glycerol by-product discharged from biodiesel fuel production process

Development of a cheap system for reuse of glycerol by-product discharged from the biodiesel fuel (BDF) production process is needed in parallel with development of a low-cost BDF production system. In this article, optimization of compost fermentation of glycerol by-product was studied. The type and amount of additive nitrogen source was studied, and good utilization of glycerol was observed when 0.5 g of urea was added to a mixture of 625 g dry sawdust, 25 g of microbial seed, and 50 g of glycerol by-product. To achieve efficient compost fermentation, repeated batch fermentation was applied and five batch cultures were repeated. Although the pH level and nitrogen and water contents were maintained at suitable levels for microbial growth, the glycerol consumption rate gradually decreased with accumulation of oily compounds in the compost. Finally, a material cost evaluation of the compost fermentation proposed in this study was performed. The total material cost decreased to ￥0.57 /l of BDF when employing an existing compost system for the fermentation process, although sawdust used for mushroom cultivation was used in this study at the very high cost of ￥123 /kg dry sawdust. However, the cost of disposal of the glycerol byproduct as an industrial waste was ￥5.2 /l of BDF produced; therefore, there might be an economical advantage to compost fermentation of glycerol by-product from BDF production.     

Designing a purification process for chromium-, copper- and arsenic-contaminated wood

The disposal of chromated copper arsenate (CCA)-treated wood is becoming a serious problem in many countries due to increasing levels of contamination by the hazardous elements, chromium, copper and arsenic. The present experiment was conducted as a preliminary step toward one-step solvent extraction of CCA-treated wood. Because chromium, copper and arsenic have different chemical characteristics, it is best to consider them separately prior to designing a one-step extraction process. As a basis, various two-step extraction processes were first designed and tested experimentally to determine feasibility. Among these combinations, the treatment combining oxalic acid as the 1st step and a sodium oxalate solution under acidic conditions (pH 3.2) as the 2nd step was found to be an effective way of extracting CCA elements from treated wood. Extraction efficiency reached 100% for arsenic and chromium and 95.8% for copper after a 3-h sodium oxalate treatment, following a 1-h pre-extraction process with oxalic acid. On the other hand, the same combination under alkaline conditions (pH 11.2) during the 2nd step was ineffective for copper removal, indicating that pH plays an important role in complexation with sodium oxalate solution. The present results suggest that the extraction of CCA elements using a combination of oxalic acid and acidic sodium oxalate solution is a promising basis for application to a one-step extraction method.     

PIXE trace element analysis of an aquatic plant as indicator of heavy metal pollution

A new way of detecting trace elements in water is developed by using charged $\text{P}$article $\text{I}$nduced $\text{X}$-ray $\text{E}$mission (PIXE) analysis of cell walls of $\text{Chara corallina}$, a fresh water alga.     

A novel extractant for removal of hazardous metals from preservative-treated wood waste

The purpose of this study was to develop a one-step metal extraction process that would effectively remove hazardous elements from wood powder or chips of western hemlock [Tsuga heterophylla (Raf.) Sarg.] treated with chromated copper arsenate (CCA) preservative. In addition, we tested this method for wood treated with other copper-based preservatives such as ammoniacal copper quaternary (ACQ) and copper, boron, and azole (CuAz). A bioxalate solution consisting of 0.125 M oxalic acid adjusted to pH 3.2 with sodium hydroxide was tested for its ability to extract chromium, copper, and arsenic from wood treated with CCA and copper from ACQ, CuAz, or a mixture of CCA-, ACQ-, and CuAz-treated wood in single step. The extraction proceeded efficiently with 6 h of treatment, and was insensitive to the differences in chemical characteristics, including solubility of individual elements. After 6 h of treatment, approximately 90% of chromium, copper, and arsenic were effectively removed from wood treated with CCA or a mixture of CCA, ACQ, and CuAz and 90% of copper from ACQ- and CuAz-treated wood. These results demonstrate that the solvent extraction technique using pH-adjusted bioxalate solution with sodium hydroxide is a promising method for pollution minimization by various types of wastes contaminated with heavy metals and arsenic.     

Toxicity and metabolism of copper pyrithione and its degradation product, 2,2'-dipyridyldisulfide in a marine polychaete

We conducted acute toxicity tests and sediment toxicity tests for copper pyrithione (CuPT) and a metal pyrithione degradation product, 2,2′-dipyridyldisulfide [(PS)₂], using a marine polychaete Perinereis nuntia. The acute toxicity tests yielded 14-d LC₅₀ concentrations for CuPT and (PS)₂ of 0.06 mg L⁻¹ and 7.9 mg L⁻¹, respectively. Sediment toxicity tests resulted in 14-d LC₅₀ concentrations for CuPT and (PS)₂ of 1.1 mg kg⁻¹ dry wt. and 14 mg kg⁻¹ dry wt., respectively. In addition to mortality, sediment avoidance behavior and decreases in animal growth rate were observed; growth rate was the most susceptible endpoint in the sediment toxicity tests of both toxicants. Thus, we propose lowest observed effect concentrations of 0.3 mg kg⁻¹ dry wt. and 0.2 mg kg⁻¹ dry wt. for CuPT and (PS)₂, respectively, and no observed effect concentrations of 0.1 mg kg⁻¹ dry wt. for both CuPT and (PS)₂. The difference in the toxicity values between CuPT and (PS)₂ observed in the acute toxicity test was greater than the difference in these values in the sediment toxicity test, and we attribute this to (PS)₂ being more hydrophilic than CuPT. In addition to the toxicity tests, we analyzed conjugation activity of several polychaete enzymes to the toxicants and marked activity of palmitoyl coenzyme-A:biocides acyltransferase and UDP-glucuronosyl transferase was observed.     

Characteristics of a bioxalate chelating extraction process for removal of chromium,copper and arsenic from treated wood

The disposal of wood waste treated with chromated copper arsenate (CCA) is a problem in many countries. We have proposed a novel chelating extraction technique for CCA-treated wood using bioxalate, a solution of oxalic acid containing sufficient sodium hydroxide to adjust the pH to 3.2, which is an effective way to obtain an extraction efficiency of 90% for chromium, copper, and arsenic. The purpose of the present study was to investigate the characteristics of bioxalate extraction of CCA-treated wood. Extractions of CCA-treated western hemlock chips with solutions of bioxalate, oxalic acid, and sodium hydroxide were carried out. The use of bioxalate was confirmed as the most effective extraction technique for chromium, copper and arsenic, with an efficiency of 90%. Extraction with simple oxalic acid was ineffective for copper (less than 40% extraction efficiency), but effective for chromium and arsenic, with 90% efficiency. Sodium hydroxide showed a similar tendency, being ineffective for chromium and copper (less than 20% extraction efficiency), but relatively effective for arsenic (around 70–80% efficiency). We also discovered an interesting phenomenon whereby the addition of sodium hydroxide to a simple oxalic acid solution during the oxalic acid extraction progress resulted in dramatically increased extraction efficiency for copper, chromium and arsenic, up to 90%. Although oxalic acid was ineffective for copper extraction, the addition of sodium hydroxide during the oxalic acid extraction process rendered it effective.     

Performance of water cut-off and remediation promotion techniques at coastal waste landfill sites

This paper proposes the construction of steel pipe sheet pile (SPSP) cutoff walls for promoting remediation of water-soluble toxic substances and containment of water-soluble toxic substances at landfill sites in order to maintain and ensure the environmental safety of waste landfill sites over time. It investigates environmental safety at coastal waste landfill sites by applying water cut-off and remediation promotion techniques to the joint sections of SPSP water cut-off walls that provide shore protection for waste landfills. Results from the research herein show that the construction of SPSP water cut-off walls with features such as the containment of water-soluble toxic substances and remediation promotion is possible by applying water cut-off and remediation techniques to H–H joints, which are structural joint components of SPSP walls. In addition, they show that the performance of remediation in H–H joints can be controlled by adjusting the water cut-off efficiency of the H–H joint flange.     

Effect of temperature on VFA’s and biogas production in anaerobic solubilization of food waste

The effectiveness of methane fermentation treatment used in food waste processing is currently limited by solubilization and acidogenesis. In efforts to improve the treatment process, this study examined the effects of temperature on solubilization and acidogenesis. The solubilization rate of food waste, which was based on suspended solid removal, was 47.5%, 62.2%, 70.0%, 72.7%, 56.1% and 45.9% at 15 °C, 25 °C, 35 °C, 45 °C, 55 °C and 65 °C, respectively. Solubilization rate was accelerated from the middle to late experimental periods under mesophilic (35 °C and 45 °C) conditions. In contrast, overall solubilization rate was significantly lower under thermophilic (55 °C and 65 °C) conditions than under mesophilic conditions, although solubilization occurred rapidly in the early experimental period. The production of biogas was high under mesophilic conditions of 35 °C and 45 °C, at 64.7 and 62.7 mL/g-VS, respectively, while it was scarce under thermophilic conditions. Solubilization of food waste was accelerated under both mesophilic and thermophilic conditions; however, solubilization rate was observed to be particularly high under mesophilic conditions, and a shortening of the hydraulic retention time is expected under thermophilic conditions.     

Carbamoyl phosphate synthetase I deficiency: molecular genetic findings and prenatal diagnosis

We report a Japanese boy who died at Day 28 of life because of severe carbamoyl phosphate synthetase I (CPS1) deficiency that was proven by enzyme assay. By analysis of cDNA and genomic DNA, he was shown to be a compound heterozygote with two point mutations of the CPS1 gene, 840G>C leading to an aberrant splicing and 1123C>T (predicting Q375X). The 840G>C was a mutation described in another Japanese family. Since his parents carried each mutation heterozygously, we performed prenatal diagnosis at 16 weeks of his mother's next gestation by multiplex PCR and melting curve analysis in a single capillary containing two-color fluorescent (LC-Red 640 and LC-Red 705) probes on LightCycler. We analyzed genomic DNA extracted from amniotic cells and found that the fetus was homozygous for the wild-type alleles. At term a healthy girl was born without hyperammonemia. Copyright © 2001 John Wiley & Sons, Ltd.