Models for waste life cycle assessment: Review of technical assumptions

A number of waste life cycle assessment (LCA) models have been gradually developed since the early 1990s, in a number of countries, usually independently from each other. Large discrepancies in results have been observed among different waste LCA models, although it has also been shown that results from different LCA studies can be consistent. This paper is an attempt to identify, review and analyse methodologies and technical assumptions used in various parts of selected waste LCA models. Several criteria were identified, which could have significant impacts on the results, such as the functional unit, system boundaries, waste composition and energy modelling. The modelling assumptions of waste management processes, ranging from collection, transportation, intermediate facilities, recycling, thermal treatment, biological treatment, and landfilling, are obviously critical when comparing waste LCA models.This review infers that some of the differences in waste LCA models are inherent to the time they were developed. It is expected that models developed later, benefit from past modelling assumptions and knowledge and issues. Models developed in different countries furthermore rely on geographic specificities that have an impact on the results of waste LCA models. The review concludes that more effort should be employed to harmonise and validate non-geographic assumptions to strengthen waste LCA modelling.     

Optimization of compost fermentation of glycerol by-product discharged from biodiesel fuel production process

Development of a cheap system for reuse of glycerol by-product discharged from the biodiesel fuel (BDF) production process is needed in parallel with development of a low-cost BDF production system. In this article, optimization of compost fermentation of glycerol by-product was studied. The type and amount of additive nitrogen source was studied, and good utilization of glycerol was observed when 0.5 g of urea was added to a mixture of 625 g dry sawdust, 25 g of microbial seed, and 50 g of glycerol by-product. To achieve efficient compost fermentation, repeated batch fermentation was applied and five batch cultures were repeated. Although the pH level and nitrogen and water contents were maintained at suitable levels for microbial growth, the glycerol consumption rate gradually decreased with accumulation of oily compounds in the compost. Finally, a material cost evaluation of the compost fermentation proposed in this study was performed. The total material cost decreased to ￥0.57 /l of BDF when employing an existing compost system for the fermentation process, although sawdust used for mushroom cultivation was used in this study at the very high cost of ￥123 /kg dry sawdust. However, the cost of disposal of the glycerol byproduct as an industrial waste was ￥5.2 /l of BDF produced; therefore, there might be an economical advantage to compost fermentation of glycerol by-product from BDF production.     

TEMPO-Mediated Oxidation of Norway Spruce and Eucalyptus Pulps: Preparation and Characterization of Nanofibers and Nanofiber Dispersions

This study deals with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation of cellulose. Softwood and hardwood pulp fibers were suspended in water and oxidized to various extents at pH 10 and 22 °C using sodium hypochlorite in the presence of TEMPO radical and sodium bromide. This reaction system is known to be the most efficient one for the introduction of both surface carboxyl and aldehyde groups. Important relationships between formation of these functional groups and the fibrillation yield, light transmittance of the water dispersions and degree of polymerization of the oxidized softwood and hardwood pulps were established in the present study. A birefringence test confirmed the presence of nanofibers which according to atomic force microscopy analyses had diameters in the 1.6–3.8 nm range.     

Designing a purification process for chromium-, copper- and arsenic-contaminated wood

The disposal of chromated copper arsenate (CCA)-treated wood is becoming a serious problem in many countries due to increasing levels of contamination by the hazardous elements, chromium, copper and arsenic. The present experiment was conducted as a preliminary step toward one-step solvent extraction of CCA-treated wood. Because chromium, copper and arsenic have different chemical characteristics, it is best to consider them separately prior to designing a one-step extraction process. As a basis, various two-step extraction processes were first designed and tested experimentally to determine feasibility. Among these combinations, the treatment combining oxalic acid as the 1st step and a sodium oxalate solution under acidic conditions (pH 3.2) as the 2nd step was found to be an effective way of extracting CCA elements from treated wood. Extraction efficiency reached 100% for arsenic and chromium and 95.8% for copper after a 3-h sodium oxalate treatment, following a 1-h pre-extraction process with oxalic acid. On the other hand, the same combination under alkaline conditions (pH 11.2) during the 2nd step was ineffective for copper removal, indicating that pH plays an important role in complexation with sodium oxalate solution. The present results suggest that the extraction of CCA elements using a combination of oxalic acid and acidic sodium oxalate solution is a promising basis for application to a one-step extraction method.     

Reductive dechlorination of non-ortho substituted polychlorinated biphenyls by ultraviolet irradiation in alkaline 2-propanol

The photodechlorination pathways of 3,3′,4,5,5′-pentachlorobiphenyl (3,3′,4,5,5′-PentaCB) and the related lower polychlorinated biphenyl congeners irradiated at 254 nm in alkaline 2-propanol were elucidated. Steric effect is the most important factor for controlling the dechlorination pattern of these substrates. Electronic effect also influences the photoreactivity of chlorine substituents.     

PIXE trace element analysis of an aquatic plant as indicator of heavy metal pollution

A new way of detecting trace elements in water is developed by using charged $\text{P}$article $\text{I}$nduced $\text{X}$-ray $\text{E}$mission (PIXE) analysis of cell walls of $\text{Chara corallina}$, a fresh water alga.     

Study on recycled asphalt concrete for use in surface course in airport pavement

This research investigated the possibility of using recycled asphalt concrete as surface course in airport pavement. The basic properties of recycled asphalt binder after short- and long-term aging were firstly tested and compared with those of the virgin asphalt. Then, a series of laboratory tests were performed to evaluate the performance of recycled asphalt concrete (containing 40% and 70% RAP), in which the HMA mixture without RAP was used as a control. Furthermore, an experimental pavement consisting of three sections (corresponding to 0%, 40% and 70% RAP content) was constructed to verify the laboratory test results. These results indicated that the recycled asphalt could achieve the similar properties against long-term aging as virgin asphalt. Recycled asphalt concrete containing 40% RAP could be used as surface course in airport pavement as it exhibited similar performance as control mixture both from the laboratory and experimental pavement test results. On the contrary, recycled asphalt concrete containing 70% RAP was not recommended as its fatigue property was much poorer compared with that of virgin asphalt mixture.     

In vitro evaluation of atmospheric particulate matter and sedimentation particles using yeast bioassay system.

Little information on the evaluation of airborne particulate matter (APM) and sedimentation particles from subway stations is available. The thermal metamorphism of train wheels generating toxic particles in subway stations is a possibility. In this study, the toxicity and physiological effects of particles from subway stations were evaluated using a yeast bioassay system. Estrogenic and antiestrogenic activities of APM in APM extracts from subway stations were determined. No estrogenic activity was found in the APM fractions and their S9-activated APM samples. Sedimentation dust samples also showed no estrogen activity. In contrast, extracts from sedimentation dust samples showed antiestrogen activity. Marked yeast toxicity was observed in the samples extracted from sedimentation dust. Potent yeast toxicity was also found in the S9-activated extracts from sedimentation dust. The results suggest that sedimentation dust from a semiclosed area of a subway system has antiestrogen activity, although both the origin and generation system of this activity are uncertain. These pollutants in sedimentation dust may change to a more toxic form in vivo by S9 activation.     

A novel extractant for removal of hazardous metals from preservative-treated wood waste

The purpose of this study was to develop a one-step metal extraction process that would effectively remove hazardous elements from wood powder or chips of western hemlock [Tsuga heterophylla (Raf.) Sarg.] treated with chromated copper arsenate (CCA) preservative. In addition, we tested this method for wood treated with other copper-based preservatives such as ammoniacal copper quaternary (ACQ) and copper, boron, and azole (CuAz). A bioxalate solution consisting of 0.125 M oxalic acid adjusted to pH 3.2 with sodium hydroxide was tested for its ability to extract chromium, copper, and arsenic from wood treated with CCA and copper from ACQ, CuAz, or a mixture of CCA-, ACQ-, and CuAz-treated wood in single step. The extraction proceeded efficiently with 6 h of treatment, and was insensitive to the differences in chemical characteristics, including solubility of individual elements. After 6 h of treatment, approximately 90% of chromium, copper, and arsenic were effectively removed from wood treated with CCA or a mixture of CCA, ACQ, and CuAz and 90% of copper from ACQ- and CuAz-treated wood. These results demonstrate that the solvent extraction technique using pH-adjusted bioxalate solution with sodium hydroxide is a promising method for pollution minimization by various types of wastes contaminated with heavy metals and arsenic.     

Toxicity and metabolism of copper pyrithione and its degradation product, 2,2'-dipyridyldisulfide in a marine polychaete

We conducted acute toxicity tests and sediment toxicity tests for copper pyrithione (CuPT) and a metal pyrithione degradation product, 2,2′-dipyridyldisulfide [(PS)₂], using a marine polychaete Perinereis nuntia. The acute toxicity tests yielded 14-d LC₅₀ concentrations for CuPT and (PS)₂ of 0.06 mg L⁻¹ and 7.9 mg L⁻¹, respectively. Sediment toxicity tests resulted in 14-d LC₅₀ concentrations for CuPT and (PS)₂ of 1.1 mg kg⁻¹ dry wt. and 14 mg kg⁻¹ dry wt., respectively. In addition to mortality, sediment avoidance behavior and decreases in animal growth rate were observed; growth rate was the most susceptible endpoint in the sediment toxicity tests of both toxicants. Thus, we propose lowest observed effect concentrations of 0.3 mg kg⁻¹ dry wt. and 0.2 mg kg⁻¹ dry wt. for CuPT and (PS)₂, respectively, and no observed effect concentrations of 0.1 mg kg⁻¹ dry wt. for both CuPT and (PS)₂. The difference in the toxicity values between CuPT and (PS)₂ observed in the acute toxicity test was greater than the difference in these values in the sediment toxicity test, and we attribute this to (PS)₂ being more hydrophilic than CuPT. In addition to the toxicity tests, we analyzed conjugation activity of several polychaete enzymes to the toxicants and marked activity of palmitoyl coenzyme-A:biocides acyltransferase and UDP-glucuronosyl transferase was observed.