The application of system dynamics in different practices of a waste management system

The continuous increase in waste generation warrants global management of waste to reduce the adverse economic, social, and environmental impact of waste while achieving goals for sustainability. The complexity of waste management systems due to different waste management practices renders such systems difficult to analyze. System dynamics (SD) approach aids in conceptualizing and analyzing the structure, interactions, and mode of behavior of the complex systems. The impact of the underlying components can therefore be assessed in an integrated way while the impact of possible policies on the system can be studied to implement appropriate decisions. This review summarizes various applications of SD pertinent to the waste management practices in different countries. Practices may include waste generation, reduction, reuse/recovery, recycling, and disposal. Each study supports regional-demanding targets in environmental, social, and economic scopes such as expanding landfill life span, implementing proper disposal fee, global warming mitigation, energy generation/saving, etc. The interacting variables in the WMS are specifically determined based on the defined problem, ultimate goal, and the type of waste. Generally, population and gross domestic product can increase the waste generation. An increase in waste reduction, source separation, and recycling rate could decrease the environmental impact, but it is not necessarily profitable from an economic perspective. Incentives to separate waste and knowledge about waste management are variables that always have a positive impact on the entire system.

     

Comparison of different sequential extraction procedures for mercury fractionation in polluted soils

Environmental Science and Pollution Research - Three sequential extraction procedures (SEPs), modified Tessier, modified BCR, and CIEMAT, were compared for mercury fractionation in polluted soils....     

试论生态文明制度体系的构建

建立健全生态文明制度体系是推进我国生态文明建设的重点。党的十八届三中全会通过的《中共中央关于全面深化改革若干重大问题的决定》指出,生态文明制度体系应当包括决策制度、评价制度、管理制度与考核制度等内容。立足社会主义制度建设的中国特色,针对我国生态文明建设的具体需求,本文将生态文明制度体系解构为四大板块:绿色高效决策制度、生态有价评估制度、生态环境监管制度与生态优先考核制度,并进一步明确了各项制度构建工作的具体内容。生态文明制度体系的构建和不断完善,将为全面建成人与自然和谐的美丽中国提供系统保障。     

离子色谱法测定PM_(2.5)中硫酸根离子含量不确定度评议

准确测定大气颗粒物中水溶性组份对分析污染物来源及身体健康具有重要意义。本文采用离子色谱法测定PM2.5中硫酸根离子含量,并对测定的不确定度进行分析。分析过程不确定度来源是样品重复性测量引入不确定度,样品测量准确性引入不确定度和标准曲线的不确定度。应用不确定度评定理论,计算硫酸根离子的合成不确定度。结果表明,滤膜中硫酸根离子本底浓度高低与剪裁滤膜环节是不确定度的主要来源。为了提高分析的准确性,建议使用本底低的滤膜,并取整张滤膜进行分析。     

珠江口表层水中多环芳烃的分布特征及健康风险评估

分别于2015年2、5、8、11月在珠江八大入海口采集表层水体样品,应用固相萃取富集法对该区域表层水体中16种USEPA优控多环芳烃(PAHs)的时空分布特征进行分析,并利用终生致癌风险增量模型(ILCR)对该区域的饮水健康风险进行评价。结果表明:珠江口4个季度所采集的水样中,∑15PAHs的浓度范围为18.0~50.3 ng/L,含量处于中等水平。其中7种强致癌性∑7PAHs的浓度范围为1.53~3.73 ng/L,占∑15PAHs的5.89%~11.1%,∑15PAHs和∑7PAHs在枯水期(2、11月)样品中明显高于丰水期(5、8月)。就组成特征而言,各采样点PAHs以3、4环为主。珠江口表层水中非致癌类PAHs的危害商数值为0.99×10~(-5)~2.73×10~(-5),远低于USEPA规定的阈值(1);致癌类PAHs产生的健康风险为6.50×10~(-8)~2.37×10~(-7),其中Ba P导致的饮水途径健康风险最高,所有点位致癌类PAHs的健康风险均低于USEPA推荐的对致癌物质最大可接受风险水平(10~(-6)),表明珠江口表层水中PAHs尚不具备严重的致癌风险,但是仍然存在潜在的健康风险,需要重点控制和管理。     

Low digestibility of phytate phosphorus,their impacts on the environment,and phytase opportunity in the poultry industry

Environmental Science and Pollution Research - Phosphorus is an essential macro-mineral nutrient for poultry, needed for the body growth, development of bones, genomic function, good...     

Correction to: Preparation of GO/MIL-101(Fe,cu) composite and its adsorption mechanisms for phosphate in aqueous solution

Environmental Science and Pollution Research - A Correction to this paper has been published: https://doi.org/10.1007/s11356-021-15526-6     

Comprehensive utilization of residues of Magnolia officinalis based on fiber characteristics

Journal of Material Cycles and Waste Management - The traditional Chinese medicinal plant Magnolia officinalis has a wide range of applications; including more than 200 kinds of patented Chinese...     

亲水性多孔载体在流化床中的生物膜形成过程分析

采用实验制备的一种新型亲水性多孔聚合物作为流化床反应器中生物膜附着生长的载体,实现流态化水力条件下的生物挂膜过程.在3个结构尺寸相同的流化床反应器中考察了接种污泥浓度、进水有机负荷及载体粒径对亲水性多孔载体生物挂膜量的影响,试验结果表明,接种污泥浓度为30 g VSS/L、进水TOC值为350 mg/L、载体粒径为5～8 mm时载体表面的附着生物量最大,反应器运行12 d的载体附着生物量达到4.45 g VSS/L,膜结构稳定,表现出较活性污泥法更高的活性.在进水TOC、氨氮浓度分别为350 ms/L、50 mg/L,HRT为6 h的情况下,两者的去除率分别达到了97.1%和64.3%,表明载体上的生物膜对污水中TOC及氨氮的去除表现出高效率.挂膜后载体表面上的微生物以丝状菌为主,孔壁上的微生物以球菌和杆菌为主要生物相,证明载体内外表面皆适宜微生物的生长,并且形成合理的生物相分布.