Recycling sewage sludge into ceramic materials: A review

Environmental Chemistry Letters - Huge amounts of unwanted sewage sludge are generated in the process of wastewater treatment, calling for methods to recycle sewage sludges into value-added...     

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

An asymmetric analysis of the impacts of energy use on carbon dioxide emissions in the G7 countries

Environmental Science and Pollution Research - The foremost theme of the paper is to explore the asymmetric/symmetric impact of energy consumption on the carbon dioxide emission of G7 countries...     

Understanding and addressing the environmental risk of microplastics

Over the past decades, the plastic production has been dramatically increased. Indeed, a category of small plastic particles mainly with the shapes of fragments, fibers, or spheres, called microplastics (particles smaller than 5 mm) and nanoplastics (particles smaller than 1 μm) have attracted particular attention. Because of its wide distribution in the environment and potential adverse effects to animal and human, microplastic pollution has been reported as a serious environment problem receiving increased attention in recent years. As one of the commonly detected emerging contaminants in the environment, recent evidence indicates that the concentration of microplastics show an increasing trend, for the reason that up to 12.7 million metric tons of plastic litter is released into aquatic environment from land-based sources each year. Furthermore, microplastic exposure levels of model organisms in laboratory studies are usually several orders of magnitude higher than those found in environment, and the microplastics exposure conditions are also different with those observed in the environment. Additionally, the detection of microplastics in feces indicates that they can be excreted out of the bodies of animal and human. Hence, great uncertainties might exist in microplastics exposure and health risk assessment based on current studies, which might be exaggerated. Policies reduce microplastic emission sources and hence minimize their environmental risks are determined. To promote the above policies, we must first overcome the technical obstacles of detecting microplastics in various samples.     

氨废水资源化利用的折流式超重力床集成技术

利用折流式超重力床将氨废水处理的精馏和吸收过程集成在一台设备中,开发出一种设备小型化、流程紧凑的氨废水资源化利用集成技术。与传统技术相比,该技术在大幅节省占地面积和空间的同时,还可大幅节约设备建设所用钢材。工业规模试验结果表明,不同浓度的氨废水经该技术处理后可转化为氨质量分数大于22%的氨水资源,处理出水中氨氮质量浓度低于8.2 mg/L,尾气中未检测到氨,处理结果优于GB 31573—2015《无机化学工业污染物排放标准》。     

地铁区间隧道烟气层化现象研究

以重庆某一地铁区间隧道为原型,搭建了1∶15小尺寸隧道试验台,通过小尺寸试验与FDS 6.5.2数值模拟开展隧道顶部烟气温度分布及分层规律研究。基于Newman提出的烟气层分区条件,研究了不同纵向风速下的烟气分层现象,提出了烟气稳定层化长度的概念,并分析了火源热释放速率及断面型式对烟气层化长度的影响。试验证明了Newman提出的烟气分层计算方法是可信的。结果表明:纵向风速较小时,火源下游能呈现烟气分层现象;烟气稳定层化长度受火源热释放速率影响较大,随热释放速率增大而增大;隧道高度的变化对烟气稳定层化长度的影响较小。     

三峡水库蓄水期不同调度方案对洞庭湖出口水位的影响

洞庭湖水情受到长江和四水的综合影响，因此三峡水库蓄水运行必将对洞庭湖出口水位产生影响。通过构建模型对洞庭湖出口的水位过程进行模拟，以三峡出库日均流量、洞庭湖四水合成日均流量为输入，城陵矶站日水位过程为输出，以量化和分析城陵矶水位变化受三峡水库调度的影响。通过三峡入库流量代替出库流量，还原自然状态下的水位过程，并根据各调度方案计算的出库流量模拟各调度方案下城陵矶的水位变化过程。对比各调度方案下三峡水库蓄泄水对洞庭湖出口水位的影响可以发现：各蓄水方案对洞庭湖出口水位都造成了一定的影响，起蓄时间较早的方案影响时间较长，整体上平均水位变化也较大，但起蓄后水位变化较为平缓；起蓄时间较晚的方案影响时间较短，整体上平均水位变化相对较小，但起蓄后水位变化较为剧烈。考虑到不同年份和不同来水类型情况对洞庭湖出口水位的影响存在差异，各蓄水方案的优劣需要具体分析和讨论     

Carbon Emission from the Surface of Coarse Woody Debris in Korean Pine Forests of Southern Primorye

Carbon dioxide fluxes from the surface of coarse woody debris (CWD) have been measured in Korean pine forests of the southern Sikhote-Alin mountain range. The seasonal dynamics of oxidative conversion of CWD carbon have been evaluated, and average values of the CO₂ emission rate have been determined for CWD fragments of three tree species at different stages of decomposition. The degree of decomposition is an important factor of spatial variation in CO₂ emission rate, and temporal variation in this parameter is adequately described by an exponential function of both CWD temperature and air temperature (R² = 0.65–0.75).     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

生活垃圾强制分类形势下的多源废荧光灯管回收管理机制建议

废荧光灯管的来源广泛，包括工业来源和社会来源，社会来源又包括居民来源，企业事业单位、公共场所等机构来源，具有多来源的特性。废荧光灯管中含有汞，若不经过妥善处理，会造成环境污染，对人的身体健康造成危害。随着国内生活垃圾分类的开展，废荧光灯管作为生活垃圾中有害垃圾的典型类别被强制分类，但仍存在很多问题。本文梳理了我国废荧光灯管的产生情况、LED灯替代情况，并对美国、欧盟、日本和我国国内典型城市的废荧光管理情况进行了总结。针对我国废荧光灯管的回收现状，从责任主体、责任划分、收集渠道、资金机制等角度提出了相关的管理建议，为推动我国废荧光灯管的管理提供借鉴。