Enhanced degradation of the antibiotic tetracycline by heterogeneous electro-Fenton with pyrite catalysis

There is actually increasing concern about the accumulation of antibiotics, such as tetracycline, in soil and water bodies. There is therefore a need for efficient methods to degrade antibiotics and thus clean waters. Here we tested the degradation of tetracycline using the heterogeneous electro-Fenton-pyrite method and compared the results with the conventional electro-Fenton method. The reaction was performed with a boron-doped diamond or Pt anode and carbon-felt cathode allowing electrogeneration of H₂O₂ from O₂ reduction. Results show an increasing tetracycline mineralization using the following methods: anodic oxidation with electrogenerated H₂O₂, electro-Fenton and then electro-Fenton-pyrite using boron-doped diamond. Ion-exclusion HPLC revealed the complete removal of malic malonic, succinic, acetic, oxalic and oxamic acids. Nitrogen present in tetracycline was mainly mineralized in NH₄ ⁺. The higher efficiency of electro-Fenton-pyrite is explained by self-regulation of soluble Fe²⁺ and pH to 3.0 from pyrite catalyst favoring larger ^·OH generation from Fenton’s reaction.     

Numerical study of coastal sandbar migration, by hydro-morphodynamical coupling

We present a numerical model based on the hydro-morphodynamical coupling to study coastal sandbar migration. In order to improve both nonlinear and dispersive wave processes in relatively shallow water, we developed a finite element model based on the Legendre polynomials and on the Extended Boussinesq model. This model reproduces the propagation of wave trains with a high degree of accuracy on a greater range of depths than the standard Boussinesq models. We also implemented the Total Variation Diminishing schemes to improve the quality of the computed hydrodynamic fields, especially in areas where sharp flow gradients occurred. The coupled morpho-hydrodynamical model is then used to simulate the migration of real sandbars observed at Rousty beach (Mediterranean French coast). For verification the model results are compared with field measurements obtained from a small-scale field campaign carried out over two years at Rousty beach, and the results of this comparison are thoroughly discussed and analyzed.     

Earthworm Aporrectodea molleri (oligochaeta)’s coelomic fluid-associated bacteria modify soil biochemical properties and improve maize (Zea mays L.) plant growth under abiotic stress conditions

Environmental Science and Pollution Research - This study evaluated the impact of Aporrectodea molleri's coelomic fluid-associated bacteria (CFB) on Zea mays L. growth and soil biochemical...     

Electro-Fenton degradation of the antibiotic sulfanilamide with Pt/carbon-felt and BDD/carbon-felt cells. Kinetics,reaction intermediates,and toxicity assessment

The degradation of 230 mL of a 0.6-mM sulfanilamide solution in 0.05 M Na₂SO₄ of pH 3.0 has been studied by electro-Fenton process. The electrolytic cell contained either a Pt or boron-doped diamond (BDD) anode and a carbon-felt cathode. Under these conditions, organics are oxidized by hydroxyl radicals formed at the anode surface from water oxidation and in the bulk from Fenton’s reaction between initially added (and then electrochemically regenerated) Fe²⁺ and cathodically generated H₂O₂. From the decay of sulfanilamide concentration determined by reversed-phase liquid chromatography, an optimum Fe²⁺ concentration of 0.20 mM in both cells was found. The drug disappeared more rapidly using BDD than Pt, and, in both cases, it was more quickly removed with raising applied current. Almost total mineralization was achieved using the BDD/carbon-felt cell, whereas the alternative use of Pt anode led to a slightly lower mineralization degree. In both cells, the degradation rate was accelerated at higher current but with the concomitant fall of mineralization current efficiency due to the greater increase in rate of the parasitic reactions of hydroxyl radicals. Reversed-phase liquid chromatography allowed the identification of catechol, resorcinol, hydroquinone, p-benzoquinone, and 1,2,4-trihydroxybenzene as aromatic intermediates, whereas ion exclusion chromatography revealed the formation of malic, maleic, fumaric, acetic, oxalic, formic, and oxamic acids. NH₄ ⁺, NO₃ ^?, and SO₄ ^2? ions were released during the electro-Fenton process. A plausible reaction sequence for sulfanilamide mineralization involving all detected intermediates has been proposed. The toxicity of the solution was assessed from the Vibrio fischeri bacteria luminescence inhibition. Although it acquired its maximum value at short electrolysis time, the solution was completely detoxified at the end of the electro-Fenton treatment, regardless of the anode used.     

High thiabendazole fungicide uptake using Cellana tramoserica shells modified by copper: characterization,adsorption mechanism,and optimization using CCD-RSM approach

Environmental Science and Pollution Research - In this paper, Cellana tramoserica (CT) shells were modified by copper and used as an adsorbent to remove thiabendazole (TBZ) from aqueous media. The...     

Extension of the skin shear stress Li’s relationship to the flat bed

A proper estimation of the skin shear stress τ _s is necessary for a proper evaluation of sediment flux at the sediment–fluid interface. Several empirical formulas of the skin shear stress have been proposed in the literature for rippled bed as function of the factor form η/λ (η and λ are respectively the height and wavelength of the bedform). These formulas express that in the presence of bedform, τ _s is a partition of the total shear stress τ _b . In contrast, when the bottom is flat, τ _s is exactly equal to τ _b . Based on in situ measurements, Li (J Geophys Res 99:791–799, 1994) has proposed a new formula of τ _s depending on u _*/η (u _* is the friction velocity, ${u_{*}=\sqrt{\tau_{b}/\rho}}$ ), but not as a function of η/λ. This formulation appears physically more realistic, but does not cover the flat bottom range. The purpose of this short note is therefore the extension of the Li’s expression to this type of bottom.     

Fenton treatment of olive oil mill wastewater--applicability of the method and parameters effects on the degradation process

The low biodegradability of polyphenolic compounds typically found in olive processing indicated that biological treatment is not always successful in the treatment of olive oil mill wastewater in term of COD removal. In this study the results of investigations on the applicability of Fenton‘s reagent in the treatment of this effluent were discussed. The efficiency of this method was determined. 86% of removal COD was obtained using 5 mol H2O2 and 0.4 mol Fe^2 per liter of crude OMW. The main parameters that govem the complex reactive system, i.e., time, pH, [H2O2] and [Fe(ll)] were studied.     

Oilfield-produced water as a medium for the growth of Chlorella pyrenoidosa outdoor in an arid region

Environmental Science and Pollution Research - Oilfield-produced wastewater (OPW) provided by the local oil industry was used as a medium (without any pre-treatment) for the outdoor cultivation of...     

Electrochemical treatment of aqueous wastes containing pyrogallol by BDD-anodic oxidation

In this work, the electrochemical oxidation of pyrogallol (1,2,3-trihydroxybenzene) on boron-doped diamond anodes has been studied. The voltammetric results showed that pyrogallol oxidation takes place in the same potential region as that of phenol where the supporting electrolyte is stable. Synthetic wastewaters containing pyrogallol have been treated in a bench-scale electrolysis plant. This plant operates in a discontinuous mode by recirculating the waste continuously through a single-chamber electrochemical flow cell. The complete mineralization of pyrogallol and the electro-generated pollutants is obtained in the electrolytic device. HPLC analyses show the formation of carboxylic acids as the main intermediates. The efficiency of the electrochemical process was found to depend mainly on the pollutant concentration present in the waste and on the applied current density. The high efficiency of this technology can be explained in terms of the direct electro-oxidation at the BDD surface and the oxidation carried out by hydroxyl radicals and other electro-generated oxidants.