Speciation of iron in river water using a specific catalytic determination and size fractionation

A comprehensive speciation scheme was proposed for the speciation of iron in river water (0.45 microm filtrate). The speciation was based on the catalytic determination of reactive iron as Fe3+ and Fe(III)Li/(3 -in)+, where i = 1 or 2 for a unidentate and i = 1 for a bidentate ligand, Ln-. The scheme incudes size fractionation and acid decomposition of the sample and determination of the coexisting species. The proposed scheme was applied to natural and artificial samples and acidified preparations of these. Resulting fractionation patterns of reactive and unreactive iron and of coexisting humic acid were useful for the characterization of iron species in the natural samples. The reactive iron in the molecular weight (Mr) > or = 10(4) fraction was associated with humic iron aggregates and estimated as iron complexed with them. The unreactive iron in this fraction dissociated in 0.1 M HCI and was estimated as iron in the aggregates of iron(III) hydroxide (s) and humic iron. From the fractionation results of the artificial sample, the reactive and unreactive iron in the Mr < 10(3) fraction may be formed by complexing simple anions like F- and C2O4(2-) at their naturally-occurring concentration levels. The fractionation results also suggested that humic acid and Si contributed to the formation of reactive and unreactive iron in the Mr > or = 10(4) fraction.     

Preparation and performance of arsenate (V) adsorbents derived from concrete wastes

Solid adsorbent materials, prepared from waste cement powder and concrete sludge were assessed for removal of arsenic in the form of arsenic (As(V)) from water. All the materials exhibited arsenic removal capacity when added to distilled water containing 10–700 mg/L arsenic. The arsenic removal isotherms were expressed by the Langmuir type equations, and the highest removal capacity was observed for the adsorbent prepared from concrete sludge with heat treatment at 105 °C, the maximum removal capacity being 175 mg-As(V)/g. Based on changes in arsenic and calcium ion concentrations, and solution pH, the removal mechanism for arsenic was considered to involve the precipitation of calcium arsenate, Ca₃(AsO₄)₂. The enhanced removal of arsenic for the adsorbent prepared from concrete sludge with heat treatment was thought to reflect ion exchange by ettringite. The prepared adsorbents, derived from waste cement and concrete using simple procedures, may offer a cost effective approach for arsenic removal and clean-up of contaminated waters, especially in developing countries.     

Applying value of information methods to prioritize elements for water quality management with an example of linear alkylbenzene sulfonate in the Yodo River,Japan

Narrowing the decision space is crucial in water quality management at the meso-scale for developing countries, where a lack of data and financial budgets prevent the development of appropriate management plans and result in serious water quality degradation in many rivers. In this study, a framework for handling this task is proposed, comprising a lumped water quality model, with sensitivity and uncertainty analyses, and a management domain, including loss estimation and value of information analysis. Through a case study with linear alkylbenzene sulfonate (LAS) in the Yodo River, it is found that non-point sources and flow rate are factors that influence LAS concentration at the hot spot location. By considering the entire process of water quality management planning, we identify that the definition of the cost function of LAS treatment determines the appropriate estimation for the expected loss in reducing LAS under uncertain water quality conditions. The value of information analysis with “expected value of including uncertainty” and “expected value of perfect information” further helps estimate the benefit of including uncertainty in decision-making and the financial cost for obtaining more information regarding inputs that have been previously prioritized.     

Estimation of 1999-2004 dietary daily intake of PCDDs, PCDFs and dioxin-like PCBs by a total diet study in metropolitan Tokyo, Japan

A study of the dietary intake of dioxins, consisting of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dioxin-like PCBs) through foods retailed in the metropolitan Tokyo area from 1999 to 2004 was carried out by the total diet-market basket method on the basis of food classification (14 groups) and the data on food consumption in the Tokyo region obtained from the Japan Nutrition Survey. The daily intake of dioxins per kg of body weight for a 50 kg average adult body was 2.18 pg TEQ/kg/day in 1999, 1.87 pg TEQ/kg/day in 2000, 1.25 pg TEQ/kg/day in 2001, 1.60 pg TEQ/kg/day in 2002 and 2003 and 1.55 pg TEQ/kg/day in 2004, respectively. These amounts were less than the tolerable daily intake (TDI) of 4 pg TEQ/kg/day for dioxins established in Japan. The dioxins taken daily through fish and shellfish (group 10) accounted for more than 50% of sum WHO-TEQs. In addition, more than 90% of the daily intake of dioxins was taken through fish and shellfish (group 10), meat and eggs (group 11), milk and dairy products (group 12). Also, this study clearly showed that the ratio of dioxin-like PCBs in the daily intake of dioxins was increasing yearly because the reduction rate of dioxin-like PCBs was lower than that of PCDDs and PCDFs in foods.     

CDNA microarray assessment for ozone-stressed Arabidopsis thaliana

Various detrimental factors in the environment damage plants, resulting in growth inhibition or withering. However, it is not easy to identify causal factors by visually inspecting the damaged plants. Therefore, we have developed a sensitive and reliable method for plant diagnosis, based on measuring changes in expression of a set of genes in a DNA microarray. With this method, we have been able to detect and discriminate between plants stressed by ozone, drought, or wounding.     

Organizational issues for disseminating recycling technologies of carbon fiber-reinforced plastics in the Japanese industrial landscape

Journal of Material Cycles and Waste Management - Carbon fiber-reinforced plastics (CFRP) are used for structural materials in the aircraft and automotive industries due to their lightweight and...     

Inactivation of SARS-CoV-2 by Ozonated Glycerol

We evaluated the SARS-CoV-2-inactivation activity of ozonated glycerol (OG). When a viral solution with 1% fetal bovine serum (FBS) was mixed with test solutions at a ratio of 1:19 and incubated for 20 s, OG with ozone concentrations of over 1000 ppm inactivated ≥ 94.38% of the virus. Extension of the reaction time to 1 h led to the inactivation of ≥ 99.82% of the virus (the viral titer was below the detection limit). Extension to 24 h resulted in concentrations over 200 ppm OG inactivating ≥ 99.87% of the virus (the viral titers were below the detection limit). Next, viral solutions with 1, 20, and 40% FBS were mixed with test solutions at a ratio of 1:19 and incubated for 5 min. Whereas the virucidal activity of 500 ppm OG was very limited in the presence of 1% FBS (79.47% inactivation), it increased in the presence of 20 and 40% FBS (95.13 and 97.95% inactivation, respectively; the viral titers were not below the detection limit). Meanwhile, over 1000 ppm OG inactivated ≥ 99.44% of the virus regardless of the FBS concentration (the viral titers were below the detection limit). Extension of the reaction time to 1 h led to 500 ppm OG inactivating ≥ 99.91 and ≥ 99.95% of the virus with 20 and 40% FBS, respectively (the viral titers were below the detection limit). These results suggested that OG might be useful as a virucidal agent against SARS-CoV-2.

     

Positive buoyancy in eel leptocephali: an adaptation for life in the ocean surface layer

Many planktonic organisms have adaptations such as floats or lighter substances to obtain buoyancy to help them remain in the surface layer of the ocean where photosynthetic primary production occurs and food is most abundant. The almost totally transparent eel larvae, called leptocephali, are a unique member of the planktonic community of the surface layer, but their ecology and physiology are poorly understood. We conducted a comparative study on the specific gravity of planktonic animals including 25 taxa of 7 phyla of marine invertebrates and 6 taxa of leptocephali (vertebrate) to gain a broad perspective on the buoyancy of the eggs and larval stages of the Japanese eel. The specific gravity values of the various freshly caught marine invertebrate taxa varied widely from 1.020 to 1.425, but leptocephali had some of the lowest values (1.028–1.043). Artificially cultured live leptocephali had even greater buoyancies with specific gravities of 1.019–1.025 that were close to or lower than seawater, and their buoyancy showed ontogenetic changes among the different early life history stages. Leptocephali appear to have a unique mechanism of buoyancy control by chloride cells all over body surface through osmoregulation of body fluid contained in the extracellular matrix of transparent gelatinous glycosaminoglycans filling their bodies. This adaptation is likely a key factor for their survival by helping them to remain in the surface layer where food particles are the most abundant, while being transparent for predator avoidance. The ontogenetic change in buoyancy of eel eggs, leptocephali and glass eels likely enhances their larval survival, transport, and recruitment to terrestrial freshwater habitats.     

Evaluation of recycling policies for PET bottles based on multiattribute utility indices

This study focused on waste plastic, especially the polyethylene telephthalate (PET) bottle as representative waste, which has been assigned as goods to be recycled by the Packaging Waste Recycling Law in Japan. We developed a plastic transport model which explained the entire flow of plastic from the production stage to the disposal stage within an the evaluation model of plastic recycle policy based on multiattribute utility theory. This model is designed to be used by local municipal governments in supporting the evaluation of the PET bottle recycling policy. In evaluating the plastics recycling policy, we selected indices relating to economy, ecology, and rate of resource recycling. The results indicate that when the evaluation of the material recycling policy and thermal recycling policy in the model city were characterized in terms of their economic and environmental aspects the thermal recycling policy had the highest utility within our scenario. Received: July 31, 1998 / Accepted: January 26, 1999