Current status and research on E-waste issues in Asia

Rapid economic growth in Asia and the increasing transboundary movement of secondary resources will increasingly require both 3R endeavors (reduce, reuse, recycle) in each country and appropriate control of international material cycles. Recently, managing electrical and electronic waste (E-waste) has become an important target for domestic and international material cycles from the viewpoints of environmental preservation and resource utilization efficiency. To understand the current status of E-waste issues in the context of international material cycles and to discuss the future tasks related to achieving 3R in the region, we organized the National Institute for Environmental Studies (NIES) E-waste Workshop in December 2004. This article reviews past studies on E-waste and briefly describes the topics presented and discussions held at the workshop. The topics at the workshop included E-waste generation, recycling systems, international trade, and environmental impacts. In addition, we discussed various issues such as terminology, current environmental concerns, and possible solutions. Transboundary shipments of E-waste should be conducted taking into consideration the concept of sustainable development. The direction of future research and possible collaborations are also discussed.     

Effectiveness of resistivity monitoring for interpreting temporal changes in landfill properties

It is always possible for impermeable layers to exist in landfills. When they do, the properties of the solution at the exit of the leachate-collection system might not accurately reflect the overall properties of the landfill. This study examines whether resistivity monitoring is effective for determining the influence of impermeable layers on the leachate. The test cell used in this study was filled with waste made up mainly of incinerator ash and shredded incombustible material. Three lines of resistivity sensors were laid in the uppermost layer of the fill. A resistivity profile was recorded periodically from each of these lines. The water-table level and leachate properties were measured concurrently. Leachate conductivity was mainly controlled by concentrations of the main ions, and it correlated inversely to variations in resistivity. Temporal changes in the resistivity of the fills are an excellent means of assessing the leaching in fills. Monitoring the properties of leachate, combined with resistivity profiling, is extremely useful for interpreting the temporal changes of properties in landfills containing impermeable layers.     

Experimental arid land afforestation in Central Anatolia,Turkey

The afforestation of arid lands faces many challenges, and perhaps the most important key for success is choosing one or more species that are adapted well for local environmental conditions. We explored species that would be suitable for the steppe region of Central Anatolia. Intensive site preparation included ripping the subsoil (to 80 cm) and plowing the upper soil before planting seedlings of Elaeagnus angustifolia, Robinia pseudoacacia, Fraxinus angustifolia, and Pinus nigra were used as tree species. We also tested the success of several shrub species: Amygdalus orientalis, Calligonum polygonoides, and Spartium junceum. After five growing seasons, E. angustifolia showed the highest survival, with 80% of planted seedlings remaining. For the shrubs, A. orientalis was the most successful species with a 95% survival rate. Broad-leaved trees grew a cumulative average of 34 cm in height in 5 years, whereas P. nigra seedings grew only 9 cm. The greatest height growth occurred in the shrubs, with A. orientalis gaining 40 cm in height in 5 years. Overall, E. angustifolia and A. orientalis appeared best suited for afforestation in these areas. R. pseodoacacia and F. angustifolia may also be used as alternative species.     

Prediction of future disposal of end-of-life refrigerators containing CFC-11

The objective of this study was to predict the number of refrigerators containing CFC-11 blown isolation foam and the amount of CFC-11 banked in these refrigerators. By using a Weibull-based survival function, the number of CFC-11 containing and still-functioning refrigerators was estimated to be approximately 1.6 million in 2013 in Turkey. In order to determine the amount of CFC-11 in the isolation foam of these refrigerators, polyurethane (PU) foam samples were taken from a refrigerator manufactured in 1993 and the quantity of CFC-11 was analyzed by a GC-MS. It was determined that 113–195 mg CFC-11/g PU remains in the PU foam depending on the location such as door, sides, top and bottom. Knowing that a mid-sized refrigerator contains 4 kg PU on average, the total amount of PU foam to be disposed of is 6344 tons when the CFC-11 containing refrigerators in Turkey become obsolete in the near future. Furthermore, 717–1237 tons of CFC-11 are expected to be banked in the PU foam of these refrigerators which will exert an equivalent amount of ozone depleting potential (ODP). In addition, the global warming potential will vary between 3.4 and 5.9 million tons of CO₂.     

Development of a database of landfills and dump sites in Asian countries

This article briefly summarizes the limited landfill/dump information available for developing Asian countries, and introduces a database that aims to close the information gap through collecting and sharing data. Developing nations usually try to adapt the systems and technologies of developed countries. However, this approach may not be appropriate because of differences in socioeconomic, cultural, and political backgrounds. Many waste management projects fail after operations are transferred to local authorities owing to a lack of funds to cover the high operational expenses. Some successful projects have been adapted to local conditions, although the information on these successes is not often available for others. Nevertheless, only a few developing countries even have a national inventory of their dumps/landfills, and decision-makers have little awareness of the dumps and their impacts. The database introduced here will gather landfill/dump information from each country and organize it in a comparable format, and it will then be published on the Internet.     

An expert-based approach to forest road network planning by combining Delphi and spatial multi-criteria evaluation

Changes in forest landscapes resulting from road construction have increased remarkably in the last few years. On the other hand, the sustainable management of forest resources can only be achieved through a well-organized road network. In order to minimize the environmental impacts of forest roads, forest road managers must design the road network efficiently and environmentally as well. Efficient planning methodologies can assist forest road managers in considering the technical, economic, and environmental factors that affect forest road planning. This paper describes a three-stage methodology using the Delphi method for selecting the important criteria, the Analytic Hierarchy Process for obtaining the relative importance of the criteria, and finally, a spatial multi-criteria evaluation in a geographic information system (GIS) environment for identifying the lowest-impact road network alternative. Results of the Delphi method revealed that ground slope, lithology, distance from stream network, distance from faults, landslide susceptibility, erosion susceptibility, geology, and soil texture are the most important criteria for forest road planning in the study area. The suitability map for road planning was then obtained by combining the fuzzy map layers of these criteria with respect to their weights. Nine road network alternatives were designed using PEGGER, an ArcView GIS extension, and finally, their values were extracted from the suitability map. Results showed that the methodology was useful for identifying road that met environmental and cost considerations. Based on this work, we suggest future work in forest road planning using multi-criteria evaluation and decision making be considered in other regions and that the road planning criteria identified in this study may be useful.     

Monitoring of heavy metal and organic compound levels along the Eastern Aegean coast with transplanted mussels

Within the framework of the MYTITURK project, heavy metals and organic compounds contaminations were assessed in transplanted mussels in eight different bays from the Eastern Aegean coast. Izmir Bay, Canakkale Strait entrance, Saros and Candarli Bay were defined low pollution extent according to Principal Component Analysis taking into metal accumulation. PAHs (Polycyclic Aromatic Hydrocarbons) levels in the range of 29.4–64.2 ng g⁻¹ (dry weight) indicated that PAH contamination level classified as low along the Aegean coast. Concentrations of Aroclor1254 and 1260 were higher in transplanted mussels from Canakkale Strait Outlet due to industrial activities was originated from Marmara Sea. The organochlorinated pesticides such as heptachlor (<0.4 ng g⁻¹), aldrin (<0.30 ng g⁻¹), dieldrin (<0.75 ng g⁻¹), endrin (<2.3 ng g⁻¹) concentrations were homogeneous however, HCB (Hexachlorobenzene) and lindane concentrations were found undetectable level along the coast. DDE/DDT ratio in the caged mussels form Gulluk and Gokova Bay indicated recent DDT (Dikloro difenil trikloroethan) usage in these areas. The residues of organochlorinated compounds in transplanted mussels confirm the long persistence of DDTs. According to world health authorities, the concentration of heavy metals in mussels for the study area can generally be considered not to be at levels posing a health risk except Zn. The levels of POPs indicated that transplanted mussels have a lack of risk for the human health.     

Factors affecting the removal of aflatoxin M1 from food model by Lactobacillus and Bifidobacterium strains

This paper describes the ability of six dairy strains of Lactobacillus and Bifidobacterium to remove aflatoxin M1 (AFM 1) from phosphate-buffered saline (PBS) and reconstituted milk. Bacteria were incubated in both PBS and reconstituted milk containing 5, 10 and 20 ng mL(-1) for 0, 4 and 24 h at 37 degrees C. After centrifugation the concentration of AFM 1 was determined in the supernatant fraction using high-performance liquid chromatography. The binding abilities of AFM 1 by viable (10(8) CFU mL(-1)) and heat-killed Lactobacillus and Bifidobacterium strains in PBS ranged from 10.22 to 26.65% and 14.04 to 28.97%, respectively. Similarly, AFM 1-binding capacity in reconstituted milk was found to range from 7.85 to 25.94% and from 12.85 to 27.31% for viable and heat-killed bacteria, respectively within 4 h. While B. bifidum Bb 13 was the best binder, the poorest removal was achieved by L. acidophilus NCC 68. Binding was reversible, and a small proportion of AFM 1 was released back into the solution. The toxin concentration and incubation period had no effect on the removal of AFM 1 by bacteria both in PBS and reconstituted milk.     

Shipyard fatalities in Turkey

The objective of this paper is to investigate causes and incidence rates of 115 fatalities between 2000 and 2010 in Turkish shipyards and to propose mitigation measures. The fatality rate in Turkish shipbuilding industry is unacceptably high, being 3.5 times the average of all industry groups. Classification of fatal occupational accidents revealed five major fatality reasons for the shipbuilding industry; falling from higher elevation to a lower level, exposed to electric shock, fire and/or explosion, being struck by or struck against objects, and caught in between. The highest number of cases of fatal accidents was found among welders, blasters, painters and substructure workers. Statistically analyzed data showed that working on Mondays and Saturdays have special impact on the fatality probability. Also, the number of fatalities is highest in working temperatures above average 25 °C, which covers from June through September. Strategies recommended to minimize the fatalities at shipyards are discussed. Furthermore a risk framework of fatal occupational accidents were drawn so that when working conditions are within the high risk region, extra precautions can be taken in order to minimize the occurrence of accidents and fatalities.     

Green consumerism: the influence of antioxidant parameters and socio-economic values on Tarhana consumption patterns

Environmental Science and Pollution Research - This study aimed to examine the production and consumption patterns of the tarhana as a green food product and its content in terms of health value in...