Air bag effectiveness as function of impact speed

An investigation was conducted to estimate the effectiveness of air bags as a function of velocity. The study consisted of three parts: a theoretical idealization, an analysis of National Automotive Sampling System/Crashworthiness Data System (NASS/CDS), and a reanalysis of previously published Fatality Analysis Reporting System (FARS) data. The theoretical analysis looked at idealized risk curves as a function of velocity; assuming that the air bag offers a benefit for both belted and unbelted occupants. Analysis of the NASS/CDS data looked at the effectiveness of air bags as a function of velocity for Maximum Abbreviated Injury Scale (MAIS) 3+ injuries. The reanalysis of the previously published FARS data looked at the effectiveness of the air bag as a function of velocity for fatalities. The theoretical analysis indicates that the air bag effectiveness should be greatest at the low velocities. The field data analysis of both NASS/CDS and FARS were consistent with the theoretical analysis, indicating that air bags are most effective at the lower velocities, below 40 kph (25 mph), for both belted and unbelted occupants. Although it was not possible to estimate a different effect for belted and unbelted for fatalities using FARS, it was possible for MAIS 3+ using NASS/CDS. For unbelted occupants the effectiveness goes to zero or becomes negative above 40 kph (25 mph) for MAIS 3+, and for belted occupants the effectiveness stays positive but with significantly lower magnitude for speeds above 40 kph (25 mph).     

Releases of phosphate fertilizer industry in the surrounding environment: Investigation on heavy metals and polonium-210 in soil

Distribution of Cu,Zn,Pb,Cr,Ni,Mn concentrations and the activity of polonium-210 in the surrounding area of a phosphate fertilizer industry located on the eastern coast of the Mediterranean Sea has been determined.Nineteen sampling sites were distributed around the industrial zone on a surface area of about 100,000 m2.Atomic absorption spectroscopy and Alpha spectroscopy were used to quantify the heavy elements and polonium-210,respectively.Investigation on a particle scale was conducted by TEM and SEM coupled to EDX and X-ray cartography to determine the nature of heavy elements carriers and their distribution.Heavy elements were mainly concentrated inside the particle size fraction 50 μm.Their levels decreased with distance increasing from the industry.According to the reference soil,enrichment factors were about 10,15,32 and 100 times for Zn,Pb,Cu,and Cr,respectively inside the particle size fraction 50 μm on the closest sites to the industry.The main contaminant sources were transport and storage of row materials and the free release of phosphogypsum waste.Heavy elements were entrapped inside agglomerates of sulfates,phosphates and iron oxihydroxides in a di used shape.Polonium-210 with an enrichment factor of about 56,showed the same behavior of the spatial distribution of the trace elements.     

Utilization of calcite and waste glass for preparing construction materials with a low environmental load

In this study, porous calcite materials are hydrothermally treated at 200 °C using powder compacts consisting of calcite and glasses composed of silica-rich soda-lime. After treatment, the glasses are converted into calcium aluminosilicate hydrates, such as zeolite phases, which increase their strength. The porosity and morphology of new deposits of hydrothermally solidified materials depend up on the chemical composition of glass. The use of calcite and glass in the hydrothermal treatment plays an important role in the solidification of calcite without thermal decomposition.     

Feeding behavior of adult <Emphasis Type="Italic">Vinciguerria nimbaria</Emphasis> (Phosichthyidae), in the tropical Atlantic (0°–4°N, 15°W)

Adult Vinciguerria nimbaria are the main prey of tuna during the tuna fishing season (late autumn and winter) in the equatorial Atlantic (0–4°N, and ~15°W). V. nimbaria trophic behavior in the fishing grounds was studied in relation to hydrobiological factors to determine its role in the trophic food web. Sampling stations spaced by 20 nautical miles were set up along a 15°W north–south transect from 4°N to 0°40S. At each station, the temperature and vertical fluorescence profiles were recorded. Nitrate and chlorophyll a analyses were performed on water sampled at different levels in the euphotic zone. Vertical plankton hauls were carried out at depths of 0–100 and 0–200 m using a standard WP2 net fitted with a 200-μm mesh gauze. Vinciguerria nimbaria adults were collected using a young-fish mid-water trawl net (10 × 15 m opening mouth, 10 mm cod end mesh). The weight of the stomach contents, the stomach fullness index, the number of prey, the frequency of occurrence and the prey preponderance were recorded for 20 fish from each haul. An oligotrophic typical tropical structure (TTS) was found between 1° and 4°N where small zooplankton was relatively abundant above or near the thermocline. In the TTS, V. nimbaria behaved as an epipelagic fish, feeding on the dominant small prey during the daytime. In turn, it was a prey for tuna. In the equatorial zone, where zooplankton was more abundant than in the north equatorial zone, V. nimbaria behaved as a mesopelagic fish and as an opportunistic mesozooplankton feeder. It consumed a wide range of sizes of food, feeding on the most abundant species of zooplankton as well as the largest zooplankton species, possibly while migrating towards the surface in the late afternoon or in the deep layer.     

Anhydramnios and cessation of fetal growth in a pregnant mother with polychemotherapy during the second trimester

This paper discusses the case of a pregnant woman with polychemotherapy during the second trimester of pregnancy for rhabdomyosarcoma of the face and cessation of fetal growth with disappearance of amniotic fluid after the first course of therapy.     

Attitudes toward abortion for fetal anomaly in the second vs. the third trimester: A survey of Parisian obstetricians

Cross-cultural differences exist in prenatal diagnosis and abortion for fetal anomaly, stemming from variations in laws, reimbursement policies, litigation, physicians' decision-making authority, and attitudes toward the prevention of handicaps. The first part of this paper discusses such differences in France and the U.S. The second part describes a survey of practising obstetricians in Paris, designed to assess (1) their attitudes toward pregnancy termination for various conditions, (2) their concern about fetal viability, (3) their desire for diagnostic certainty before justifying a late abortion, and (4) their perceived role in such decision-making. Among the 64.8 per cent (N = 217) who responded, the majority supported third-trimester termination (TTT) for diseases such as spina bifida, trisomy 21 , microcephaly, and Duchenne muscular dystrophy; 30–59 per cent supported TTT for cystic fibrosis and sickle cell disease; and 22–29 per cent supported TTT for haemophilia, tetralogy of Fallot, limb amputation, and Turner and Klinefelter syndromes. Obstetricians who approved of abortion across trimesters were less concerned with the certainty of diagnosis than its severity, more likely to think that abortion ought to be the parents' choice, but more likely to report making a recommendation to the parents about whether to abort a fetus. Such permissive abortion attitudes might imply more permissive prenatal diagnosis and abortion practice among Parisian obstetricians, which might lead to increased migration of patients from other E.C. countries. Cross-cultural variation in obstetric practice suggests that an international registry of pregnancies terminated for medical reasons, enabling further study of this issue, would be valuable.     

Hydrothermal solidification behavior of municipal solid waste incineration bottom ash without any additives

Municipal solid waste incineration (MSWI) bottom ash could be solidified with and without slaked lime (calcium hydroxide) addition by a hydrothermal method under steam pressure of 1.56 MPa at 200 °C for up to 72 h. Experimental results showed that CSH gel or tobermorite exerted a main influence on strength development, and without any additives CSH gel was easy to form, while slaked lime addition favored to form tobermorite. Tobermorite seemed to exert a larger effect on the strength development than CSH gel. Leaching results showed that the concentrations of heavy metals dissolved from the solidified specimens were effectively reduced after hydrothermal processing. The immobilization was mainly due to the tobermorite or CSH gel formation, and Pb²⁺ and Zn²⁺ seemed to be fixed more readily than Cr⁶⁺, which might be the reason that the structural Ca²⁺ within tobermorite or CSH gel was exchanged by Pb²⁺ and Zn²⁺ more easily than Cr⁶⁺. In addition, there existed a close relationship between leaching concentration and strength enhancement, and a higher strength seemed to exert a larger effect on immobilization of heavy metals.     

Potential utilization of riverbed sediments by hydrothermal solidification and its hardening mechanism

Hydrothermal solidification of riverbed sediments (silt) has been carried out in a Teflon (PTFE) lined stainless steel hydrothermal apparatus, under saturated steam pressure at 343–473 K for 2–24 h by calcium hydrate introduction. Tobermorite was shown to be the most important strength-producing constituent of the solidified silt. A longer curing time or a higher curing temperature was shown to be favorable to the tobermorite formation, thus promoting strength development; however, overlong curing time (24 h) seemed to affect the strength development negatively. The hardening mechanism consisted of the crystal growth/morphology evolution during the hydrothermal process. The species dissolved from the silt were precipitated first as fine particles, and then some of the particles seemed to build up the rudimental morphology of calcium silicate hydrate (CSH) gel. The CSH gel, with precipitated particles, appeared to cause some reorganization within the matrix, which made the matrix denser and thus gave an initial strength development. Tobermorite, transformed inevitably from the CSH gel, reinforced the matrix with its interlocked structure, and thus further promoted the strength development.     

Standardising and mapping open-source information for crisis regions: the case of post-conflict Iraq

Painting an accurate picture of the situation on the ground in countries in crisis is vital for the efficiency of humanitarian aid and reconstruction agencies. This study describes a method for standardising and mapping the plethora of open-source information. The test site for the study is post-conflict Iraq. Important information on aid distribution, reconstruction and security in Iraq can be derived from the reports of humanitarian aid agencies and the media, before being formatted, inserted into a database and mapped. The product is a visual, cartographic structure of otherwise random information, showing which organisations are working in the country, which thematic and geographic areas are being prioritized in the field, and which areas most frequently experience security events. This type of mapping not only highlights the overall working environment within different parts of the country, but it may also serve as a decision-making tool for donors and humanitarian aid agencies planning to deploy personnel.     

Fish Species Used as Biomarker for Heavy Metal and Hydrocarbon Contamination for Cross River, Nigeria

Enhanced concentrations of Fe, Zn, Mn, Pb, Cu, Cd and total hydrocarbons (THC) determined in fish samples from the Cross River system, Nigeria have been associated with clinical defects (nausea, headache, hepatitis, body rashes) observed in coastal residents who are the major consumers of the fish species. Fish samples were collected from ten locations with varying degrees of exposure to human activities. Heavy metal concentrations in fish followed the sequence: Fe>Zn>Mn>Pb>Cu>Cd with the highest concentration of 243 g/g (Fe) wet weight occurring in Tympanotonus sp. Fe levels were significantly (P<0.001) higher than other metals analysed. The sequence in total hydrocarbon concentrations according to fish species was in the order of O. niloticus (55.1 g/g) > E. fimbriata > P. elongatus > Portonus sp. > C. nigrodigitatus > Tympanotonus sp. Generally, the demersal species showed a marked potential for tolerating high levels of heavy metals while the pelagic species showed preference for the accumulation of hydrocarbons. The degree of contamination depended on pollutant type, fish species, sampling location, trophic level and their mode of feeding. The persistent accumulation and tolerable potential of Tympanotonus, Portonus and P. elongatus suggest that they might be effectively utilized as self-integrating indicators for time-series monitoring of the rate of recovery of the impacted ecosystem by heavy metals. Possible sources of pollutant include leachates from municipal dumps, used crankcase oils from fluvial discharges (mechanic workshops) and occasional oil spills.