Effects of Filler Content and Compatibilizing Agents on Mechanical Behavior of the Particle-Reinforced Composites

The study was carried out to investigate the effects of filler content and two different compatibilizing agents (Eastman G-3003 and G-3216) on the mechanical properties of polypropylene reinforced with corn stalk and wood flour. In the sample preparation, three levels of filler loading (30, 40 and 50 wt%) and one level of compatibilizing agent content (2.5 wt%) were used. For overall trend, with addition of both grades of the compatibilizing agents, tensile and flexural properties of the composites significantly improved, as compared with the pure PP. Tensile and flexural properties reach a maximum at 40 wt% filler content and gradually decrease with a further increase in wood particle content. The composites treated with G-3003 gave better results in comparison with G-3216. This could be caused by the high melt viscosity of G-3003. In general, corn stalk flour filled composites showed superior mechanical properties.     

Screening for plants and rhizospheral fungi with bioremediation potency of petroleum-polluted soils in a Tehran oil refinery area

The contamination of soils by toxic and/or hazardous organic pollutants, especially with crude oil, is a widespread problem. This study was conducted in a petroleum-contaminated area in a Tehran oil refinery to find petroleum-resistant plants and their rhizospheral fungal strains with bioremediation potency. The plants growing in the oil-polluted area were collected and determined taxonomically. Root samples of the plant species were collected from a polluted area and fungal strains determined by laboratory methods and taxonomical keys. The growth ability of the isolated fungal strains was studied in media containing 1%–15% crude oil. Results showed that seven plant species were of the highest density in the contaminated area: Alhagi persarum, Hordeum marinum, Peganum harmala, Phragmites australis, Prosopis farcta, Salsola kali, and Senecio glaucus. The root-associated fungi were isolated and showed that the fungal variation in the oil-polluted area is higher than that in a non-polluted area. The growth assay of isolated fungal strains showed that all studied fungal strains were able to form colonies at the applied concentrations but Alternaria sp. and Rhizopus sp. were the most resistant ones. Some plants were resistant to oil pollution, which also had positive effects on the fungal strains.     

Clove bud oil: an efficient, economical and widely available oil for the inhibition of wheat seed germination

Pre-harvest sprouting refers to the precocious germination of the grain in the spike prior to harvest as a result of moist weather conditions at harvest time. From the agricultural viewpoint, it is necessary to impose an exogenous dormancy to wheat seeds in order to improve the resistance of seed to pre-harvest sprouting. In this regard, we found that clove bud essential oil is a strong inhibitor for wheat seed germination. The extract obtained from clove bud by supercritical fluid extraction using CO₂ as solvent minimized the number of extracts to two compounds, eugenol and eugenyl acetate. Eugenol, as the main constituent of the oil, was responsible for its strong inhibitory activity in wheat seeds. The aqueous solution of clove bud oil was submitted to germination assay at various concentrations from 50 to 400 mg/L. Complete inhibition of seed germination was recorded when the concentration was 400 mg/L. Roots and sprouts have similar sensitivity to inhibitory effect. In an empirical study, the synergistic cooperation of eugenol and eugenyl acetate from clove bud oil in the inhibition of seed germination was found to be a 1:1 ratio. The clove bud essential oil is widely available and will broaden the horizon of applications for natural and safe inhibitors in the fields.     

Evaluation of a novel hollow fiber membrane technique for collection of 1,1-dimethylhydrazine in air

The purpose of this study was to develop a novel one-step method for the time-weighted average determination of 1,1-dimethylhydrazine (UDMH) in the air followed by spectrophotometric detection. For this reason, 0.1% hydrochloric acid as the absorbent was used in hollow fiber (HF) membrane for sampling of UDMH from an atmospheric standard chamber. Response surface methodology (RSM) with central composite design (CCD) was used to optimize the sampling parameters, such as flow rate and sampling time. Moreover, several analytical parameters including breakthrough (BT) volume, storage time, and carryover effect of the proposed HF were investigated. The results showed that optimal sampling rate was 9.90 mL/min. In order to validate the proposed method, it was compared with the National Institute for Occupational Safety and Health (NIOSH) 3515 method, which showed good compatibility between the two methods. Intra- and inter-day repeatability values of the HF method were in the range 0.082–0.1 and 0.091–0.12, respectively, and the limits of detection (LODs) and limits of quantitation (LOQs) were 0.002 and 0.006 ng/mL, respectively. The storage time of the proposed HF was 7 days at 2 °C. These results demonstrated that the one-step HF membrane offered a high sensitivity for sampling of UDMH in air.     

Effects of cimetidine and N-acetylcysteine on paraquat-induced acute lung injury in rats: a preliminary study

Abstract

Lung injury in rats challenged with paraquat at 20?mg kg^?1 body weight was histopathologically evident by inflammation, hemorrhage, and vascular congestion. Increased levels of reactive oxygen species and lipid peroxidation, decreased glutathione content, and lower tissue antioxidant capacity was found. The effects of N-acetylcysteine and cimetidine, a well-known potent inhibitor for organic cation transport, were examined. Lung injury was attenuated by N-acetylcysteine but not by cimetidine. The findings are consistent with the assumption that beneficial effects of N-acetylcysteine administration in paraquat-challenged animals might be linked to its ability for preserving the cellular redox environment and preventing oxidative stress, while cimetidine might even hasten paraquat-induced lung injury. On the other hand, the effects of cimetidine on paraquat-induced lung injury underline the importance of future studies on the role of transporters in this complication.     

Distribution of mercury in some organs of the Kani Barazan wetland common coot (Fulica atra)

We document mercury distribution in the tissues (kidney, liver, breast feathers and pectoral muscle) of a waterbird, the common coot (Fulica atra) from the Kani Barazan wetlands in north-western Iran. Bird samples were collected between November 2011 and January 2012, and mercury was assayed by using a Varian 220 atomic absorption spectrophotometer. Mean levels of mercury in kidney, liver, breast feathers and pectoral muscle were 0.13, 0.22, 0.20 and 0.09 μg/g, respectively. Mercury concentrations in tissues of F. atra were in the following order: liver>feather>kidney>pectoral muscle. The mercury level was significantly (one-way ANOVA, p<0.05) different between kidneys, livers, pectoral muscles and feathers in F. atra. Although mercury concentrations were higher for all tissues in female birds compared with males, significant (p<0.05) differences were observed in muscle only.     

Hollow-fiber liquid-phase microextraction based on carrier-mediated transport for determination of urinary methyl hippuric acids

Hollow-fiber liquid-phase microextraction based on carrier-mediated transport for analysis of methyl hippuric acids in aqueous samples is described. Under optimized conditions, relative recoveries of 83%–98% and limits of detection of 2–3 µg L^?1 were obtained, with linear calibration curves for the three isomers in the range of 10–50,000 µg L^?1. The method was applied for the determination of urine samples of volunteers at various working environments.     

From Iran: Does Improvement in Corporate Environmental Performance Affect Corporate Risk Taking?

Superior corporate environmental performance (CEP) has become essential to the competitive advantage and financial success of businesses. However, the main reasons managers pay attention to environmental performance are improved reputation in the capital market and profitability, as well as reductions in operating costs and risks. This article describes the findings of a study that examines the relationship between CEP, using a reduction of carbon dioxide (CO₂) emissions as a measure, and corporate risk taking. In addition to indicating a significant negative relationship between CEP and firm risk, the study results also show that a 1% improvement of CEP decreases corporate risk by 3%.     

Sorption-desorption of cadmium in aqueous palygorskite, sepiolite, and calcite suspensions: isotherm hysteresis

Sorption isotherms have been widely used to assess the heavy metal retention characteristics of soil particles. Desorption behavior of the retained metals, however, usually differ from that of sorption, leading to a lack of coincidence in the experimentally obtained sorption and desorption isotherms. In this study, we examine the nonsingularity of cadmium (Cd) sorption–desorption isotherms, to check the possible hysteresis and reversibility phenomena, in aqueous palygorskite, sepiolite and calcite systems. Sorption of Cd was carried out using a 24-h batch equilibration experiment with eight different Cd solution concentrations, equivalent to 20–100% of maximum sorption capacity of each mineral. Immediately after sorption, desorption took place using successive dilution method with five consecutive desorption steps. Both Cd sorption and desorption data were adequately described by Freundlich equation (0.81 < r² < 0.99). The sorption and desorption reactions, however, did not provide the same isotherms, indicating that hysteresis occurred in Cd sorption–desorption processes. The extent of hysteresis was quantified based on the differences obtained from sorption and desorption isotherms regarding the amount of Cd sorbed, the Freundlich exponent, and the Cd distribution coefficient. The results revealed that, sepiolite possessed the most hysteretic behavior among the minerals studied. Calcite showed much smaller hysteresis compared to the other two silicate clays at low Cd surface load, but its hysteresis indices significantly increased, and exceeded that of palygorskite, as the amount of Cd in the systems increased. The average amount of Cd released after five desorption steps, was 13.8%, 2.2% and 3.6% for the palygorskite, sepiolite and calcite, respectively, indicating that a large portion of Cd was irreversibly retained by the minerals.