Sequential extractions of selenium soils from Stewart Lake: total selenium and speciation measurements with ICP-MS detection

Different techniques have been employed in order to evaluate the most efficient procedure for the extraction of selenium from soil as required for speciation. Selenium contaminated sediments from Stewart Lake Wetland, California were used. A strong acid mineralization of the samples gives quantitative total selenium, which is then used to estimate recoveries for the milder extraction methods. The different extraction methodologies involve the sequential use of water, buffer (phosphate, pH 7) and either acid solution (e.g. HNO3 or HCl) or basic solutions (e.g. ammonium acetate, NaOH or TMAH). Pyrophosphate extraction was also evaluated and showed that selenium was not associated with humic acids. The extractants were subsequently analyzed by size exclusion chromatography (SEC) with UV (254 and 400 nm) and on-line ICP-MS detection; anion exchange chromatography, and ion-pair reversed phase chromatography with ICP-MS detection. For sequential extractions the extraction efficiencies showed that the basic extractions were more efficient than the acidic. The difference between the acidic and the basic extraction efficiency is carried to the sulfite extraction, suggesting that whatever is not extracted by the acid is subsequently extracted by the sulfite. The species identified with the different chromatographies were selenate, selenite, elemental selenium and some organic selenium.     

Continuous subcutaneous insulin infusion (CSII) in pregnant diabetic patients

The efficacy of the insulin infusion pump (CSII) in pregnancy was examined in 12 diabetic patients and compared with intermittent insulin therapy (IIT). In patients poorly controlled on IIT constant and rapid equilibrium was achieved with CSII (mean of glucose levels: CSII versus IIT=84 versus 137 mg/dl; S.D. = 36 versus 63 mg/dl; mean amplitude of glycemic excursion (MAGE)=65 versus 112 mg/dl. In patients well controlled on IIT, CSII led to a reduction in the variation of glucose excursions (S.D.= 29 versus 36 mg/dl; MAGE=48 versus 76 mg/dl). CSII generally produced a reduction of 20–37 per cent of daily insulin dose (in three cases there was an increase of dose with the achievement of glycemic control). Furthermore in CSII treated-patients amniotic glucose, insulin and C-peptide concentrations werefound tobeinthenormalrange(22.1±10.1 mg/dl; 5.2±2.7μ/ml; 1.25±0.71 ng/ml, respectively). All infants were horn at or near-term, had no macrosomia or neonatal problems. It is concluded that CSII is a highly efficient way to achieve normal glucose levels in pregnancy, not only in type I, hut also in type II or gestational diabetes.     

Impacts of groundwater metal loads from bedrock fractures on water quality of a mountain stream

Acid mine drainage and metal loads from hardrock mines to surface waters is a significant problem in the western USA and many parts of the world. Mines often occur in mountain environments with fractured bedrock aquifers that serve as pathways for metals transport to streams. This study evaluates impacts from current and potential future groundwater metal (Cd, Cu, and Zn) loads from fractures underlying the Gilt Edge Mine, South Dakota, on concentrations in Strawberry Creek using existing flow and water quality data and simple mixing/dilution mass balance models. Results showed that metal loads from bedrock fractures to the creek currently contribute <1% of total loads. Even if background water quality is achieved upstream in Strawberry Creek, fracture metal loads would be <5%. Fracture loads could increase substantially and cause stream water quality standards exceedances once groundwater with elevated metals concentrations in the aquifer matrix migrates to the fractures and discharges to the stream. Potential future metal loads from an upstream fracture would contribute a small proportion of the total load relative to current loads in the stream. Cd has the highest stream concentrations relative to standards. Even if all stream water was treated to remove 90% of the Cd, the standard would still not be achieved. At a fracture farther downstream, the Cd standard can only be met if the upstream water is treated achieving a 90% reduction in Cd concentrations and the median stream flow is maintained.     

Speciation of arsenic in plants by HPLC-HG-AFS: extraction optimisation on CRM materials and application to cultivated samples

A recently developed method for the determination of arsenic species (arsenite, arsenate, monomethylarsonate, MMAA, and dimethylarsinate, DMAA) has been applied to the study of arsenic speciation in plants. This method uses ion-exchange liquid chromatography coupled on-line to atomic fluorescence spectrometry through continuous hydride generation. Various extraction procedures have been studied in detail using three plant certified reference materials. None of the procedures tested revealed fully satisfying results with all kinds of plant samples; microwave assisted extraction with 0.3 mol dm-3 orthophosphoric acid was found to be the most convenient for dealing with terrestrial plants. Species stability appears good. This method was applied to real world cultivated plant parts. Arsenate appears to predominate in soils, roots and leaves; unidentified species (probably arsenosugars) play an important role (60%) in rice fruits. Carrot was found to be the most contaminated edible plant part, containing 1 mg kg-1 essentially as arsenate species. MMAA was detected in all soils and some plant parts especially shallots at low levels, whereas DMAA was found only in one soil sample and in hot pepper leaves. Arsenite is a minor component of all soils; it is also present in some plant parts at low levels. However, no evident relationships were found between As speciation in the various plant parts and much more detailed studies will be necessary to elucidate As behaviour in plants.     

Experimental approaches for size-based metal speciation in rivers

A review of the different methodologies employed to fractionate and characterize riverine suspended particulate matter is presented. The importance of size-based metal speciation is underlined and the possibility of studying it by the Sedimentation Field Flow Fractionation (SdFFF) technique is illustrated. The studies on the metal load in river Suspended Particulate Matter (SPM) performed over the last ten years are critically reviewed focusing on the different methods employed to collect, concentrate and size-fractionate samples. The fact that there is no homogeneity in methods and data collection in this field is underlined. Among the different fractionation techniques, Field Flow Fractionation (FFF) methodologies have proved to be a good approach to study the role of SPM in metal load and transport. The possibility of studying size-based metal speciation using the SdFFF technique is presented and the importance of metal speciation in rivers is underlined.     

Effect of some heavy metals and soil humic substances on the phytochelatin production in wild plants from silver mine areas of Guanajuato, Mexico

Phytochelatins (PCs) were determined in the wild plants, focusing on their relationship with the levels of heavy metals and humic substances (HS) in soil. Ricinus communis and Tithonia diversifolia were collected from several sites in Guanajuato city (Mexico), which had long been the silver and gold mining center. The analysis of PCs in root extracts was carried out by liquid chromatography (derivatization with monobromobimane). Total Ag, Cd, Cu and Pb in plant roots and in soil samples, as well as soil HS were determined. The association of metals with HS in soils was evaluated by size exclusion chromatography (SEC) with UV and ICP-MS detection. The results obtained revealed the induction of PCs in R. communis but not in T. diversifolia. The levels of Cd and Pb in plant roots presented strong positive correlation with PC-2 (r = 0.9395, p = 0.005; r = 0.9573, p = 0.003, respectively), indicating that these two metals promote PCs induction in R. communis. On the other hand, the inverse correlation was found between soil HS and metal levels in roots of R. communis (Cu > Pb > Cd > Ag), in agreement with the decreasing affinity of these metals to HS. Importantly, the inverse correlation between soil HS and plant PC-2 was observed (r = −0.7825, p = 0.066). These results suggest that metals strongly bound to HS could be less bioavailable to plants, which in turn would limit their role in the induction of PCs. Indeed, the SEC elution profiles showed Pb but not Cd association with HS and the correlation between metal in soil and PC-2 in plant was statistically significant only for Cd (r = 0.7857, p = 0.064). Based on these results it is proposed that the role of heavy metals in PCs induction would depend on their uptake by R. communis, which apparently is controlled by the association of metals with soil HS. This work provides further evidence on the role of environmental conditions in the accumulation of heavy metals and phytochelatin production in plants.     

Continuous monitoring of conventional parameters to assess receiving water quality in support of combined sewer overflow abatement plans.

As part of its long-term control plan for combined sewer overflow (CSO) abatement, the city of Buffalo, New York, maintained a network of Hydrolab Datasondes (Hydrolab-Hach Company, Loveland, Colorado) to assess receiving water-quality effects by continuously logging dissolved oxygen, pH, temperature, conductivity, and turbidity. Although the effect of individual CSOs could be visualized, turbidity levels entering the Buffalo River from the upper watershed often were greater than from CSO discharges. Turbidity data showed that the Buffalo River was a net-sediment sink. Low dissolved oxygen levels were observed in the summer during dry weather, baseflow, and watershed-wide storms and CSO events. Some CSOs did not produce dissolved oxygen sags in the receiving waters, but others did. This information, together with the sampling done for organic and inorganic contaminants, can aid the decisionmaking process when prioritizing outfalls for abatement work and provides a baseline against which receiving water-quality improvements can be measured.