Monitoring of Phenol in Wastewater Bioremediation by HPLC

Bioremediation emphasizes the detoxification and destruction of toxic substances by microorganisms. Wastewater obtained from an industrial concern was solvent extracted with methyl alcohol and dichloromethane and analysed by GC/MS. Besides phenol, a large variety of organic compounds were detected. Under controlled laboratory conditions, the wastewater was innoculated with a mixed culture of microorganisms specially selected for their abilities to degrade phenol. Samples were collected at regular intervals from the stirred tank bioreactor and analysed for phenol by reverse phase HPLC with a C18 column. Results shows that from an initial phenol concentration of 987 ppm, slightly more than 50% was destroyed within 163 hours. The dry weight of the microorganisms and the plate count (CFU/ml) shows a steady increase from 0.5238 gms to 0.5355 gms and from 1.1E+9 to 1.94E+13 respectively over the same period. This suggested that the phenol was consumed by the microorganisms as the sole carbon source.     

Locating Co-presence in Media Messages about Global Warming

This paper responds to recent calls for alternative approaches to the analysis of environmental communication that uncover overlooked voices in the discussion of environmental issues. Borrowing core principles from critical rhetoric, it suggests a way to categorize media messages according to how human–nature relationships are constructed in media discourse. The paper illustrates how, in presenting contrasting and often oppositional constructions of human–nature relationships, the media messages examined articulate three recurrent (but not equal) discourses on global warming. These discourses include (1) nature-as-out-of-reach discourse, (2) nature-as-antagonist discourse, and (3) nature-as-co-present discourse. By juxtaposing these discourses, the paper shows how environmental communication scholars can engage in critical realism and political advocacy to illuminate latent public discourse that holds the potential to champion marginalized voices of nature and accentuate the interconnectedness of humans and the environment.     

Evaluation of aerosol sources at European high altitude background sites with trajectory statistical methods

This study has investigated the influence of synoptic weather patterns and long-range transport episodes on the concentrations of several compounds related to different aerosol sources (EC, OC, SO₄^2?, Ca²⁺, Na⁺, K⁺, ²¹⁰Pb, levoglucosan and dicarboxylic acids) registered in PM10 or PM2.5 aerosol samples collected at three remote background sites in central Europe. Air mass back-trajectories arriving at these sites have been analysed by statistical methods. Firstly, air mass back-trajectories have been grouped into clusters. Each cluster corresponds to specific meteorological scenarios, which were extracted and discussed. Finally, redistributed concentration fields have been computed to identify the main potential source regions of the different key aerosol components. A marked seasonal pattern is observed in the occurrence of the different clusters, with fast westerly and northerly Atlantic flows during winter and weak circulation flows in summer. Spring and fall were characterised by advection of moderate flows from northeastern and eastern Europe. Significant inter-cluster differences were observed for concentrations of receptor aerosol components, with the highest concentrations of EC, OC, SO₄^2?, K⁺ and ²¹⁰Pb associated with local and mesoscale aerosol sources located over central Europe related to enhanced photochemical processes. Emissions produced by fossil fuel and biomass burning processes from the Baltic countries, Byelorussia, western regions of Russia and Kazakhstan in spring and fall also contribute to elevated levels of EC, OC, SO₄^2?, K⁺ and ²¹⁰Pb. In the summer period long-range transport episodes of mineral dust from North-African deserts were also frequently detected, which caused elevated concentrations of coarse Ca²⁺ at sites. The baseline aerosol concentrations in central Europe at the high altitude background sites were registered in winter, with the exception of coarse Na⁺. While the relatively high concentrations of Na⁺ can be explained by sea salt advected from the Atlantic, the low levels of other aerosol components are caused by efficient aerosol scavenging associated to advections of Atlantic air masses, as well as lower emissions of these species over the Atlantic compared to those over the European continent and very limited vertical air mass exchange over the continent.     

Oxidation of trichloroethene over metal oxide catalysts: kinetic studies and correlation with adsorption properties

The performance of bulk chromium oxide is compared with that of a Mn commercial catalyst for the deep oxidation of trichloroethene (1000-2500ppmv, 55h(-1) space velocity) in air, in dry and wet (20000ppm of H(2)O) conditions, in terms of activity, selectivity and stability. Chromium oxide was found to be more active (on a catalyst weight basis), however its activity decreases continuously with time on stream. The presence of water increases its stability, the Mn catalyst showing the opposite behaviour. The effect of water on the Cr catalyst can be explained according to the Deacon equilibrium, as the presence of water tends to decrease the Cl(2) concentration, assumed to be responsible of the catalyst deactivation. Regarding to the selectivity, the Mn catalyst yields C(2)Cl(4), CCl(4) and CHCl(3) as organochlorinated by-products, whereas chromium oxide produces only trace amounts of CCl(4). Simple power-law kinetics expressions (first-order for Mn and zero-order for Cr) provide fairly good fits for the evolution of the conversion with the temperature. Furthermore, the kinetic behaviour of chromium oxide can be represented with a Langmuir-Hinshelwood model taking into account the chlorine inhibitory effect.     

Enhancement of the CO(2) retention capacity of X zeolites by Na- and Cs-treatments

Adsorption of carbon dioxide on alkaline modified X zeolites was investigated by temperature programmed desorption (TPD) analysis of these materials previously saturated with CO(2) at 50, 100 and 200 degrees C. Parent X zeolite (in its sodium form) was treated with different sodium and cesium aqueous solutions, using both carbonates and hydroxides as precursors. The resulting materials were characterised by nitrogen physisorption, XRD, and NH(3)-TPD, in order to determine their morphological, crystallographic and chemical properties. Slight desilication phenomena were observed using hydroxides as precursors, whereas the treatment with Cs salts lead to higher crystallinity losses. Several successive adsorption-desorption cycles were carried out in order to check the regenerability of the adsorbents. Cesium-treated zeolites present higher carbon dioxide retention capacities than the sodium treated and than the parent material. When working with these Cs-modified materials, the desorption takes place mainly at temperatures between 250 and 400 degrees C, results of great practical interest, since it allows the use these kinds of materials for adsorption-desorption cycles. The evolution of the retention capacity with temperature is also markedly more positive for Cs-treated zeolite, especially when carbonate is used as the precursor. These materials maintain high retention capacities at 100 degrees C (10mg g(-1)) and even at 200 degrees C (3mg g(-1)), temperatures at which the most of the adsorbents are inactive.     

Dispersal per recruit: an efficient method for assessing sustainability in marine reserve networks.

Marine reserves are an increasingly important tool for the management of marine ecosystems around the world. However, the effects of proposed marine reserve configurations on sustainability and yield of populations are typically not estimated because of the computational intensity of direct simulation and uncertainty in larval dispersal and density-dependent recruitment. Here we develop a method for efficiently assessing a marine reserve configuration for persistence and yield of a population with sedentary adults and dispersing larvae. The method extends the familiar sustainability criteria of individual replacement for single populations based on eggs-per-recruit (EPR) to spatially distributed populations with sedentary adults, a dispersing larval phase, and limited carrying capacity in the settlement-recruit relationship. We refer to this approach as dispersal-per-recruit (DPR). In some cases, a single DPR calculation, based on the assumption that post-settlement habitat is saturated (i.e., at maximum recruitment), is sufficient to determine population persistence, while in other cases further iterative calculations are required. These additional calculations reach an equilibrium more rapidly than a full simulation of age- or size-structured populations. From the DPR result, fishery yield can be computed from yield-per-recruit (YPR) at each point. We assess the utility of DPR calculations by applying them to single reserves, uniformly distributed systems of reserves, and randomly sized and spaced systems of reserves on a linear coastline. We find that for low levels of EPR in fished areas (e.g., 10% or less of the natural, unfished EPR when post-settlement habitats are saturated by 35% of natural settlement), a single DPR calculation is sufficient to determine persistence of the population. We also show that, in uniform systems of reserves with finite reserve size, maximal fisheries yield occurs when the density of reserves is such that all post-settlement habitat is nearly saturated with settlers. Finally, we demonstrate the application of this approach to a realistic proposed marine reserve configuration.     

Anthropogenic and natural influence on the PM(10) and PM(2.5) aerosol in Madrid (Spain). Analysis of high concentration episodes

Non-mineral carbon is the main component of PM10 and PM2.5 at an urban roadside site in Madrid accounting for more than 50% of the total bulk mass in winter pollution episodes. In these cases a 70-80% of the particle mass is anthropogenic. Particles of crustal/mineral origin contribute significantly to the observed PM10 concentrations, especially in spring and summer. They have also been found in the PM2.5 fraction although secondary particles are the next most important contributor in this size. Long-range transport particle episodes of Saharan dust significantly contribute to exceedence of the new daily limiting PM10 value in the urban network and at nearby rural background stations. This type of long-range transport event also influences PM2.5 concentrations. The crustal contribution can account for up to 67 and 53% of the PM10 and PM2.5 bulk mass in such cases.     

A regional-scale sustainable development index: the case of Baja California Sur,Mexico

Sustainable development, as a multi-dimensional concept, is difficult to measure. Some efforts using indicators and indices have appeared in recent years, but most were developed on a national scale. Use of sustainability indicators has proven valuable for attaining better management of the environment by minimizing information gaps and maximizing community capabilities in terms of economic, social, environmental, and institutional sustainability dimensions. However, at least in the case of developing countries, the potential exists that national sustainability measures, based on national level indicators, may mask problems in sub-national zones with highly unsustainable conditions. This paper proposes a methodology to evaluate sustainable development at a local level, the use of which could be helpful in comparing different regions within a country or even among different countries. National sustainability indicators should result from a combination (whether additive or proportional) of regional sustainability indicators, as developed in this paper.