Literary and economic impact of the Bhopal gas tragedy

The 1984 Bhopal disaster is widely regarded as a watershed event in the field of process-safety and has been largely responsible for a paradigm shift in the outlook of both industry and the public towards risk management within the processing industries. The Bhopal disaster has led to increased regulations and awareness for process-safety related activities across the globe. This paper reports the effect of the infamous Bhopal incident on the research community and examines the performance of manufacturing industries following the disaster.

For this paper, databases of scientific publications were used to investigate research trends in the safety area following the 1984 Bhopal disaster. Our analysis focuses on prominent safety-related research fields that have emerged following the gas tragedy as well as economic indicators of the processing industries. The study reveals that the process industry has consistently progressed over the years, in spite of added regulations and a worsened public image following the Bhopal disaster, and promises to be a stable economy in the future.     

Development and evaluation of air pollution–linked quality of life (AP-QOL) questionnaire: insight from two different cohorts

Environmental Science and Pollution Research - In this study, the air pollution–related quality of life (AP-QOL) questionnaire was carried out in two geographically and economically different...     

Influence of GSTM1 and GSTT1 genotypes and confounding factors on the frequency of sister chromatid exchange and micronucleus among road construction workers

In the present study, we have investigated the influence of polymorphism of GSTM1 and GSTT1 genes and confounding factors such as age, sex, exposure duration and consumption habits on cytogenetic biomarkers. Frequency of sister chromatid exchanges (SCEs), high frequency cell (HFC) and cytokinesis blocked micronuclei (CBMN) were evaluated in peripheral blood lymphocytes of 115 occupationally exposed road construction workers and 105 unexposed individuals. The distribution of null and positive genotypes of glutathione-S transferase gene was evaluated by multiplex PCR among control and exposed subjects. An increased frequency of CBMN (7.03 ± 2.08); SCE (6.95 ± 1.76) and HFC (6.28 ± 1.69) were found in exposed subjects when compared to referent (CBMN - 3.35 ± 1.10; SCE - 4.13 ± 1.30 and HFC - 3.98 ± 1.56). These results were found statistically significant at p < 0.05. When the effect of confounding factors on the frequency of studied biomarkers was evaluated, a strong positive interaction was found. The individuals having GSTM1 and GSTT1 null genotypes had higher frequency of CBMN, SCE and HFC. The association between GSTM1 and GSTT1 genotypes and studied biomarkers was found statistically significant at p < 0.05. Our findings suggest that individuals having null type of GST are more susceptible to cytogenetic damage by occupational exposure regardless of confounding factors. There is a significant effect of polymorphism of these genes on cytogenetic biomarkers which are considered as early effects of genotoxic carcinogens.     

World demand for cobalt: An econometric study

This article analyses the world demand for cobalt. It estimates short- and long-run elasticities with respect to price, activity and in some cases with respect to substitute-complement variables. For the USA these estimates have been obtained for all the important end-use categories. Aggregate elasticities are estimated for Japan, West Germany, France and for the non-communist world (excluding the USA). The appendix to the paper models price setting in the cobalt market and presents two simple simulations conducted on the world cobalt market.     

Prenatal diagnosis of complete atrioventricular septal defect with truncus arteriosus

Truncus arteriosus (TA) is a rare cardiac anomaly constituting less than 1% of all congenital heart defects. Its association with complete atrioventricular septal defect (AVSD) is extremely unusual and only 12 cases diagnosed postnatally or postmortem have been reported so far. We describe the first case of truncus arteriosus with AVSD to be diagnosed prenatally by fetal echocardiography. Copyright © 2007 John Wiley & Sons, Ltd.     

Investigating toxic metal levels in popular edible fishes from the South Durban basin: implications for public health and food security

Contamination of the ocean by heavy metals may have ecosystem-wide implications because they are toxic even if present in trace levels, and the relative ease of their bioaccumulation by marine organisms may affect human health, primarily through consumption of contaminated fish. We evaluated metal concentrations in six different popular edible fish species and estimated the potential health risks from consumption of contaminated fish. There was no correlation between fish length and average metal accumulation although the fish species tended to accumulate significantly more Al and Zn (P?<?0.05) than any of the other metals. Significantly higher Mn concentrations were found in fish gills compared to other body parts in all fish species. Bronze seabream, Catface rockcod, and Slinger seabream had significantly higher mean Cr concentration in the liver than in either the tissues or gills. The highest concentration of Zn in fleshy tissue was in Horse mackerel (56.71 μg g^?1) followed by Bronze seabream (31.07 μg g^?1). Al levels ranged from 5.6 μg g^?1 in Atlantic mackerel to 35.04 μg g^?1 in Horse mackerel tissue while Cu and Cr concentrations were highest in the tissues of Horse mackerel (6.83 and 1.81 μg g^?1, respectively) followed by Santer seabream (3.15; 1.09 μg g^?1) and Bronze seabream (3.09; 1.30 μg g^?1), respectively. The highest tissue concentration of Mn was detected in Bronze seabream (8.23 μg g^?1) followed by Catface rockcod (6.05 μg g^?1) and Slinger seabream (5.21 μg g^?1) while Pb concentrations ranged from a high of 8.44 μg g^?1 in Horse mackerel to 1.09 μg g^?1 in Catface rockcod. However, the estimated potential health risks from fish consumption as determined by the target hazard quotient (THQ) and hazard index (HI) were significantly lower than 1, implying that metals were not present in sufficiently high quantities to be of any health and/or food and security concern in the studied fishes.     

Experimental study of solar energy–based water purifier of single-slope type by incorporating a number of similar evacuated tubular collectors

Environmental Science and Pollution Research - This research paper deals with the experimental investigation of solar energy–based water purifier (SEBWP) of single-slope type by incorporating...     

Production of cellulases from Aspergillus niger NS-2 in solid state fermentation on agricultural and kitchen waste residues

Various agricultural and kitchen waste residues were assessed for their ability to support the production of a complete cellulase system by Aspergillus niger NS-2 in solid state fermentation. Untreated as well as acid and base-pretreated substrates including corn cobs, carrot peelings, composite, grass, leaves, orange peelings, pineapple peelings, potato peelings, rice husk, sugarcane bagasse, saw dust, wheat bran, wheat straw, simply moistened with water, were found to be well suited for the organism's growth, producing good amounts of cellulases after 96 h without the supplementation of additional nutritional sources. Yields of cellulases were higher in alkali treated substrates as compared to acid treated and untreated substrates except in wheat bran. Of all the substrates tested, wheat bran appeared to be the best suited substrate producing appreciable yields of CMCase, FPase and β-glucosidase at the levels of 310, 17 and 33 U/g dry substrate respectively. An evaluation of various environmental parameters demonstrated that appreciable levels of cellulases could be produced over a wide range of temperatures (20-50 °C) and pH levels (3.0-8.0) with a 1:1.5 to 1:1.75 substrate to moisture ratio.     

Removal of arsenic from water by electrocoagulation

In the present study electrocoagulation (EC) has been evaluated as a treatment technology for arsenite [As(III)] and arsenate [As(V)] removal from water. Laboratory scale experiments were conducted with three electrode materials namely, iron, aluminum and titanium to assess their efficiency. Arsenic removal obtained was highest with iron electrodes. EC was able to bring down aqueous phase arsenic concentration to less than 10 microgl(-1) with iron electrodes. Current density was varied from 0.65 to 1.53 mAcm(-2) and it was observed that higher current density achieved rapid arsenic removal. Experimental results at different current densities indicated that arsenic removal was normalized with respect to total charge passed and therefore charge density has been used to compare the results. Effect of pH on arsenic removal was not significant in the pH range 6-8. Comparative evaluation of As(III) and As(V) removal by chemical coagulation (with ferric chloride) and electrocoagulation has been done. The comparison revealed that EC has better removal efficiency for As(III), whereas As(V) removal by both processes was nearly same. The removal mechanism of As(III) by EC seems to be oxidation of As(III) to As(V) and subsequent removal by adsorption/complexation with metal hydroxides generated in the process.     

Isotopic evidence for in-lake production of accumulating nitrate in Lake Superior.

A century-long increase in nitrate (NO3-) in the water column of Lake Superior is a classic example of recent nitrogen accumulation in ecosystems, but its cause and relationship to historical NO3- deposition is unknown. We used stable isotope ratios of oxygen and nitrogen in nitrate (delta18O-NO3 and delta15N-NO3) to examine its sources in this large lake, which represents 10% of the world's surficial liquid freshwater. The most parsimonious hypothesis to explain the rise in NO3- is that the lake is accruing NO3- deposited directly on the lake surface because it is too unproductive to completely assimilate all of it. Data for delta18O-NO3 in external sources and the water column, however, are inconsistent with this hypothesis. Instead, the isotopic evidence indicates strongly that the accumulating NO3- is almost entirely derived from nitrification occurring within the lake. While increases in atmospheric deposition of NO3- may have played a role in its buildup in the lake, other factors such as increases in NH4+ and dissolved organic nitrogen inputs from precipitation or rivers, increases in nitrogen fluxes from the sediments, and decreases in burial rates must also be considered as potential drivers of rising NO3-. The sustained accumulation of nitrogen in Lake Superior is thus more complex and incompletely understood than previously assumed.