市场与政府对农户绿色防控技术采纳的协同作用分析

农户绿色防控技术的采纳对于农药减量、农产品质量提升和生态环境保护具有重要的积极作用。基于湖北宜昌、丹江口和江西赣州285个柑橘种植户样本,运用二元Logistic回归方法,分析市场利润与政府的激励和约束政策对农户绿色防控技术采纳意愿和行为的影响。研究表明:(1)仍有36.14%的样本农户在具有绿色防控技术采纳意愿的前提下并没有真实的绿色防控技术采纳行为;(2)农户的绿色防控技术采纳行为表达受市场利润与政府激励和约束政策的双重影响。在绿色市场发展不完善,市场利润激励不足的情况下,政府激励与约束政策均能不同程度促进农户的绿色防控技术采纳行为。也即政府激励与约束政策弥补绿色农产品市场不足,在引导和规范农户的绿色病虫害防治上起到积极作用。     

Assessing groundwater quality and its sustainability in Joypurhat district of Bangladesh using GIS and multivariate statistical approaches

Sustainable groundwater quality is a key global concern and has become a major issue of disquiets in most parts of the world including Bangladesh. Hence, the assessment of groundwater quality is an important study to ensure its sustainability for various uses. In this study, a combination of multivariate statistics, geographical information system (GIS) and geochemical approaches was employed to evaluate the groundwater quality and its sustainability in Joypurhat district of Bangladesh. The results showed that the groundwater samples are mainly Ca–Mg–HCO₃ type. Principal component analysis (PCA) results revealed that geogenic sources (rock weathering and cation exchange) followed by anthropogenic activities (domestic sewage and agro-chemicals) were the major factors governing the groundwater quality of the study area. Furthermore, the results of PCA are validated using the cluster analysis and correlation matrix analysis. Based on the groundwater quality index (GWQI), it is found that all the groundwater samples belong to excellent to good water quality domains for human consumption, although iron, fluoride and iodide contaminated to the groundwater, which do not pose any significant health hazard according to World Health Organization’s and Bangladesh’s guideline values. The results of irrigation water quality index including sodium adsorption ratio (SAR), permeability index and sodium percentage (Na %) suggested that most of the groundwater samples are good quality water for agricultural uses. The spatial distribution of the measured values of GWQI, SAR, Fe (iron), EC (electrical conductivity) and TH (total hardness) were spatially mapped using the GIS tool in the study area.     

Treibhausgasemissionen zukünftiger Erdgasbereitstellung für Deutschland

Ohne Zusammenfassung Original erschienen in UWSF – Z Umweltchem ?kotox 20(2):133–144 (2008) DOI: Herausgeber: Martin Pehnt und Eckard Helmers     

Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

Structure of a Mediterranean cryptobenthic fish community and its relationships with habitat characteristics

In the last 10 years, several studies have been carried out on the fish fauna of the Ustica Island marine reserve, yet no investigation was specifically addressed to the cryptobenthic fish assemblage. The first task of this study, conducted along the shallow rocky reefs of Ustica, was to determine the species composition, diversity and relative density of the resident cryptobenthic fishes. Furthermore, we aimed to assess the effects of some macro- and microscale habitat characteristics on the distribution pattern of fishes. In particular, the effect of predator density was indirectly evaluated by comparing density data collected within and outside the integral reserve zone. Overall, 20 species belonging to Blenniidae, Gobiidae, Tripterygiidae, Scorpaenidae and Gobiesocidae were recorded. Gobius bucchichi, Scorpaena maderensis, Tripterygion delaisi, T. melanurus and T. tripteronotus were the numerically dominant and most common species. The effects of zone (i.e. of predator density), bottom type and depth on species richness, diversity and evenness were not significant. A greater total fish density was observed on stones compared with rocky cliff and plateau, but only in the shallowest depth range. At level of single species, G. bucchichi was more abundant inside than outside the integral reserve, but only on stones and at 0–2 m depth range. Density of G. bucchichi was generally higher on stones than on rocky cliffs or plateau and between 0 and 5 m depth, although these differences were not always significant. T. delaisi was conversely more abundant in the deepest stratum (7–10 m). Canonical analyses demonstrated that bottom type and depth influenced significantly the fish assemblage structure. The observed differences in the assemblage structure relied mainly upon the dominant species. T. tripteronotus was mainly associated with rocky plateau and the intermediate depth range (3–5 m), whereas S. maderensis, T. melanurus and Lipophrys trigloides inhabited preferentially the rocky cliffs. At microscale level, the habitat choice of the investigated species was almost entirely based on whether the substrate was either vegetated or composed of bare rock. T. delaisi and T. tripteronotus were associated with substrata covered by algae, whilst G. bucchichi, S. maderensis and T. melanurus preferred bare rock bottoms. In some species, the electivity indices for the less abundant type of cover, measured at different spatial scale, changed accordingly. For instance, the smaller the size of the sampled area, the higher was the intensity of the association between G. bucchichi and Anemonia viridis.     

Effects of calcium hydroxide and calcium chloride addition to bentonite in iron ore pelletization.

Pyrite ash is created as waste from the roasting of pyrite ores during the production of sulphuric acid. These processes generate great amounts of pyrite ash waste that is generally land filled. This creates serious environmental pollution due to the release of acids and toxic substances. Pyrite ash waste can be utilized in the iron production industry as a blast furnace feed to process this waste and prevent environmental pollution. The essential parameters affecting the pelletization process of pyrite ash were studied using bentonite as a binder. Experiments were then carried out using bentonite and a mixture of bentonite with calcium hydroxide and calcium chloride in order to make the bentonite more effective. The metallurgical properties of pyrite ash, bentonite, calcium hydroxide, calcium chloride, a mixture of these and sintered pellets were studied using X-ray analysis. The crushing strength tests were carried out to investigate the strength of pyrite ash waste pellets. The results of these analyses showed that pyrite ash can be agglomerated to pellets and used in the iron production industry as a blast furnace feed. The crushing strength of the pellets containing calcium hydroxide and calcium chloride in addition to bentonite was better than the strength of pellets prepared using only bentonite binder.     

Renewable Resources and Waste Recycling

In this paper we consider an endogenous growth model involving, among other inputs, a renewable resource and secondary materials. Using this analytical framework we explain the effects of waste recycling on the growth rate of the economy, that we take into account. The effects of secondary materials production on the utility and dynamics of renewable resources are also studied. Furthermore, we consider how taxes and subsidies, levied on natural resources and granted for secondary materials, influence the dynamics of the economy during the transitional phase and the stationary growth path. Finally, the validity of Hotelling’s rule and the effects of waste recycling on labor productivity are the conclusive topics of our research.     

Numerical analysis of the anaerobic co-digestion of the organic fraction from municipal solid waste and wastewater: prediction of the possible performances at Olmeto plant in Perugia (Italy).

Anaerobic digestion is mainly used for sewage sludge stabilization and for treatment of waste that has a high organic content. It also represents a powerful method for obtaining energy by means of natural gas production. Co-digestion particularly combines different organic substrates to generate a homogeneous mixture as input to the anaerobic reactor in order to increase process performance. Reactions kinetics and knowledge of process analysis represent the keys for good planning and correct management. In this paper a model to simulate the main reactions involved in anaerobic co-digestion is presented. The model was created to analyse the possible performance of the treatment plant in Olmeto, Marsciano (Perugia) in Italy. The plant is still in an experimental phase with regard to the co-digestion process and numerical simulations represent a useful tool during development of the correct management procedures for the operational phase and a good methodoly for addressing further pilot plant experiments.