Annual and weekly patterns of ozone and particulate matter in Jeddah,Saudi Arabia

Air pollution has been an increasing concern within the Kingdom of Saudi Arabia and other Middle Eastern countries. In this work the authors present an analysis of daily ozone (O₃), nitrogen oxide (NO_x), and particulate matter (<10 μm aerodynamic diameter; PM₁₀) concentrations for two years (2010 and 2011) at sites in and around the coastal city of Jeddah, as well as a remote background site for comparison. Monthly and weekly variations, along with their implications and consequences, were also examined. O₃ within Jeddah was remarkably low, and exhibited the so-called weekend effect—elevated O₃ levels on the weekends, despite reduced emissions of O₃ precursors on those days. Weekend O₃ increases averaged between 12% and 14% in the city, suggesting that NO_x/volatile organic compound (VOC) ratios within cities such as Jeddah may be exceptionally high. Sites upwind or far removed from Jeddah did not display this weekend effect. Based on these results, emission control strategies in and around Jeddah must carefully address NO_x/VOC ratios so as to reduce O₃ at downwind locations without increasing it within urban locations themselves. PM₁₀ concentrations within Jeddah were elevated compared with North American cites of similar climatology, though comparable to other large cities within the Middle East.

Implications:Daily concentrations of O₃, PM₁₀, and NO_x in and around the city of Jeddah, Saudi Arabia, are analyzed and compared with those of other reference cities. Extremely low O₃ levels, along with a significant urban weekend effect (higher weekend O₃, despite reduced NO_x concentrations), is apparent, along with high levels of PM₁₀ within the city. Urban O₃ in Jeddah was found to be lower than that of other comparable cities, but the strong weekend effect suggests that care must be taken to reduce downwind O₃ levels without increasing them within the city itself. Further research into the emissions and chemistry contributing to the reduced O₃ levels within the city is warranted.     

Genotoxicity of ferric oxide nanoparticles in Raphanus sativus: Deciphering the role of signaling factors, oxidative stress and cell death

We have studied the genotoxic and apoptotic potential of ferric oxide nanoparticles(Fe_2O_3-NPs) in Raphanus sativus(radish).Fe_2O_3-NPs retarded the root length and seed germination in radish.Ultrathin sections of treated roots showed subcellular localization of Fe_2O_3-NPs,along with the appearance of damaged mitochondria and excessive vacuolization.Flow cytometric analysis of Fe_2O_3-NPs(1.0 mg/m L) treated groups exhibited 219.5%,161%,120.4% and 161.4% increase in intracellular reactive oxygen species(ROS),mitochondrial membrane potential(ΔΨm),nitric oxide(NO) and Ca2+influx in radish protoplasts.A concentration dependent increase in the antioxidative enzymes glutathione(GSH),catalase(CAT),superoxide dismutase(SOD) and lipid peroxidation(LPO) has been recorded.Comet assay showed a concentration dependent increase in deoxyribonucleic acid(DNA) strand breaks in Fe_2O_3-NPs treated groups.Cell cycle analysis revealed 88.4% of cells in sub-G1 apoptotic phase,suggesting cell death in Fe_2O_3-NPs(2.0 mg/m L) treated group.Taking together,the genotoxicity induced by Fe_2O_3-NPs highlights the importance of environmental risk associated with improper disposal of nanoparticles(NPs) and radish can serve as a good indicator for measuring the phytotoxicity of NPs grown in NP-polluted environment.     

Conservation agricultural practices for minimizing ammonia volatilization and maximizing wheat productivity

Environmental Science and Pollution Research - A large amount of ammonia volatilization from the agricultural system causes environmental problems and increases production costs. Conservation...     

Reverse logistics in the Chinese auto-parts firms: implementation framework development through multiple case studies

In recent years, the implementation of reverse logistics (RL) in automobile manufacturing has drawn extensive interest from the Chinese government that has launched relevant take-back and environmental regulations and pilot projects. This study focuses on RL implementation issues in Chinese auto-parts manufacturing sector. Based on comprehensive literature review and multiple case studies in the Chinese auto-parts firms, this paper proposes a conceptual RL framework and highlights the major implementation issues. The purpose of this paper is to draw an overall picture of RL in the Chinese context, highlighting implementation issues in the auto-parts sector. Our study suggests that Chinese RL implementation requires close government monitoring mechanism and incentives, top management commitment within firms, technology and human capabilities support.     

Evaluation of a novel hollow fiber membrane technique for collection of 1,1-dimethylhydrazine in air

The purpose of this study was to develop a novel one-step method for the time-weighted average determination of 1,1-dimethylhydrazine (UDMH) in the air followed by spectrophotometric detection. For this reason, 0.1% hydrochloric acid as the absorbent was used in hollow fiber (HF) membrane for sampling of UDMH from an atmospheric standard chamber. Response surface methodology (RSM) with central composite design (CCD) was used to optimize the sampling parameters, such as flow rate and sampling time. Moreover, several analytical parameters including breakthrough (BT) volume, storage time, and carryover effect of the proposed HF were investigated. The results showed that optimal sampling rate was 9.90 mL/min. In order to validate the proposed method, it was compared with the National Institute for Occupational Safety and Health (NIOSH) 3515 method, which showed good compatibility between the two methods. Intra- and inter-day repeatability values of the HF method were in the range 0.082–0.1 and 0.091–0.12, respectively, and the limits of detection (LODs) and limits of quantitation (LOQs) were 0.002 and 0.006 ng/mL, respectively. The storage time of the proposed HF was 7 days at 2 °C. These results demonstrated that the one-step HF membrane offered a high sensitivity for sampling of UDMH in air.     

Heavy metals in cooler waters in Riyadh, Saudi Arabia

Water samples were collected from 400 coolers in Riyadh area. From each cooler, one feed and one cooled water samples were collected. These samples were analyzed for trace metals like Al, Cr, Cu, Fe, Mn, Ni, Pb, and Zn by Inductively Coupled Plasma (ICP) Spectrophotometer equipped with ultrasonic nebulizer. Out of 400 coolers, water from 382 (95.50%) were found to meet World Health Organization (WHO), Saudi Arabian Standards Organization (SASO), and United States Environmental Protection Agency (USEPA) drinking water standards whereas water from 18 coolers (4.50%) were found to have elevated levels of Fe, Pb, and Ni metals. In one cooler, water was allowed to stand for 12 h and a 1 L sample collected every 2 h. All the metals mentioned above with the exception of Pb were found to increase due to standing time.     

Assessment of cylindrospermopsin toxin in an arid Saudi lake containing dense cyanobacterial bloom

This study reports the presence of the cyanobacterial toxin cylindrospermopisn (CYN) and its producer Cylindrospermopsis raciborskii for the first time in Saudi freshwater sources. C. raciborskii was found in Gazan Dam Lake water with two morphotypes (coiled and straight). The appearance and cell density of this species was significantly positively related to high temperature and high ammonium concentrations, and negatively with nitrate and phosphate concentrations in the lake. Intracellular concentrations of CYN (4–173 μg L^?1) were associated with C. raciborskii rather than other cyanobacteria with a maximal value obtained in June 2011, coinciding with the highest bloom of this species (19?×?10⁷ trichome L^?1). CYN cell quotas (0.6–14.6 pg cell^?1) varied significantly along the study period and correlated with most environmental factors. The results of ELISA and liquid chromatography-mass spectrometry proved that the CYN production by strains of this species was isolated from this lake during the present study, with an amount reaching 568 μg g^?1. Extracellular CYN was also detected in cell-free lake water at concentrations 0.03–23.3 μg L^?1, exceeding the drinking water guideline value of 1 μg L^?1 during the Apr–Jul period. As this lake is an important source for drinking and irrigation waters, CYN monitoring should be included in the environmental and health risk assessment plans of these water bodies.     

Factors for implementing end-of-life product reverse logistics in the Chinese manufacturing sector

Dedicated, skilled and relatively cheap manpower coupled with efficient manufacturing techniques has elevated China’s status as the world’s factory. China is now capable of producing virtually any product, from cheap toys to some of the most sophisticated goods and equipment. The resultant economic benefits and associated enormous consumption due to rise in per capita income are accompanied by an equally unprecedented negative environmental impact arising from the huge increase of end-of-life (EoL) products. This study aims to understand and prioritise EoL product reverse logistics (RL) factors from Chinese manufacturing sector perspective. Multiple case studies in five different industries within the manufacturing sector have been carried out and analytic hierarchy process (AHP) has been employed to prioritise the governing factors for the successful RL implementation in the Chinese manufacturing sector. Results indicate that Chinese firms are unlikely to embark on RL operations without external factors such as strict government legislation.     

Chemical Composition of Bottled Water in Saudi Arabia

Fourteen domestic and seven imported bottled water brands were analysed in Saudi Arabia for various physico-chemical water quality parameters. The results of the analysis were compared with the drinking water standards set by Saudi Arabia and World Health Organization. The levels of different physico-chemical parameters like TDS, Ca, Mg, Na, K, NO₃, Cl and SO₄ of all local and imported bottled water brands met the different drinking water standards. Fluoride was found below the Saudi Arabian Standard Organization recommended limits in two of the local brands whereas fluoride levels in all of the imported brands were below the recommended values. In one imported brand, pH was found not conforming to the recommended standards. The concentrations of trace metals in all brands were within the drinking water standards. Comparison of the study results with the reported label values indicated good agreement with stated pH values but considerable variation for Ca, Mg, and Na in the local brands and comparatively low variation in the imported brands. Low F and SO₄ variations were found in the local brands and comparatively high SO₄ variation in the imported brands.     

Anti-biofilm Activity of Solvent-Cast and Electrospun Polyhydroxyalkanoate Membranes Treated with Lysozyme

Biofilms consist of groups of microorganisms that adhere to surfaces, such as wound and implant surfaces, making it difficult to prevent or remove their formation by antibiotic treatment, due to the innate resistance of the biofilm. Effective treatments of medical biofilms are limited. Polyhydroxyalkanoate (PHA) is a biodegradable and biocompatible polymer that is a suitable alternative to petroleum based polymers for use as a raw material for medical applications. In this study, membranes of the copolymer poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(HB-co-HHx)] containing different HHx monomer contents were used due to its porosity and flexibility, and different sheets were prepared by solvent-casting and electrospinning methods. The sheets were loaded with lysozyme in order to measure the maximum amount of protein adsorption and to examine the ability of immobilized enzyme to inhibit biofilm formation and detach previously established biofilms. Our results have shown maximum loading of 16.1 µg enzyme per 9.5 mm³ discs, and these sheets are effective for inhibiting biofilm formation. Also, lysozyme loaded, eletrospun sheets were observed to more effectively inhibit biofilm formation, as compared to solvent-cast sheets. Based on this study, P(HB-co-HHx) sheets are a suitable material for being used as a potential raw material for fabrication of wound dressings to be used in anti-biofilm treatments.