Adsorptive removal of phosphate by the bimetallic hydroxide nanocomposites embedded in pomegranate peel

This study aimed to fabricate new and effective material for the efficiency of phosphate adsorption. Two types of adsorbent materials, the zirconium hydroxides embedded in pomegranate peel (Zr/Peel) and zirconium-lanthanum hydroxides embedded in pomegranate peel (Zr–La/Peel) were developed. Scanning electronic microscopy (SEM), x-ray photoelectron spectroscopy (XPS) and x-ray diffraction (XRD) were evaluated to give insight into the physicochemical properties of these adsorbents. Zr–La/Peel exceeded the adsorption efficiency of Zr/Peel adsorbents in batch adsorption experiments at the same pH level. The peel as a host can strive to have a strong “shielding effect” to increase the steadiness of the entrenched Zr and La elements. La and Zr are hydroxide metals that emit many hydrogen ions during the hydrolysis reaction, which contribute to protonation and electrostatic attraction. The highest adsorption capacity of La–Zr/Peel for phosphate was calculated to be 40.21 mg/g, and pseudo second-order equation is very well fitted for kinetic adsorption. Phosphate adsorption efficiency was reduced by an increase of pH. With the background of coexisting Cl^?, little effect on adsorption efficiency was observed, while adsorption capacities were reduced by almost 20–30% with the coexistence of ${{\text{SO}}_4}^{2?}$, ${{\text{NO}}_3}^{?}$ and humic acid (HA).     

Phyto-management of Cr-contaminated soils by sunflower hybrids: physiological and biochemical response and metal extractability under Cr stress

Environmental Science and Pollution Research - Chromium (Cr) is a biologically non-essential, carcinogenic and toxic heavy metal. The cultivation of Cr-tolerant genotypes seems the most favorable...     

Environment polluting conventional chemical control compared to an environmentally friendly IPM approach for control of diamondback moth, <Emphasis Type="Italic">Plutella xylostella</Emphasis> (L.), in China: a review

The diamondback moth, Plutella xylostella, is recognized as a widely distributed destructive insect pest of Brassica worldwide. The management of this pest is a serious issue, and an estimated annual cost of its management has reached approximately US$4 billion. Despite the fact that chemicals are a serious threat to the environment, lots of chemicals are applied for controlling various insect pests especially P. xylostella. An overreliance on chemical control has not only led to the evolution of resistance to insecticides and to a reduction of natural enemies but also has polluted various components of water, air, and soil ecosystem. In the present scenario, there is a need to implement an environmentally friendly integrated pest management (IPM) approach with new management tactics (microbial control, biological control, cultural control, mating disruption, insecticide rotation strategies, and plant resistance) for an alternative to chemical control. The IPM approach is not only economically beneficial but also reduces the environmental and health risks. The present review synthesizes published information on the insecticide resistance against P. xylostella and emphasizes on adopting an alternative environmentally friendly IPM approach for controlling P. xylostella in China.     

Graphical estimation of the dual-enzyme kinetic parameters for Cr(VI) reduction

Chromium(VI) (Cr(VI)) contamination of soil and groundwater is a major environmental concern. Bioreduction of Cr(VI) by Shewanella oneidensis MR-1 (MR-1) can be considered a feasible option to reduce the toxic and mobile Cr(VI) to the less toxic and less mobile chromium(III) (Cr(III)). The reaction rate expression for Cr(VI) reduction is nonlinear and the rate constants are evaluated by employing nonlinear optimization techniques. The outcome of the optimization techniques, in general, depends on the initial estimate of the kinetic parameters which is not always available. A graphical approach based on sound mathematical reasoning has been developed which is accurate, simpler to use, and can provide the best initial estimate for nonlinear optimization.     

A Solvent-Free Approach for Production of Films from Pectin and Fungal Biomass

Self-binding ability of the pectin molecules was used to produce pectin films using the compression molding technique, as an alternative method to the high energy-demanding and solvent-using casting technique. Moreover, incorporation of fungal biomass and its effects on the properties of the films was studied. Pectin powder plasticized with 30% glycerol was subjected to heat compression molding (120 °C, 1.33 MPa, 10 min) yielding pectin films with tensile strength and elongation at break of 15.7 MPa and 5.5%, respectively. The filamentous fungus Rhizopus oryzae was cultivated using the water-soluble nutrients obtained from citrus waste and yielded a biomass containing 31% proteins and 20% lipids. Comparatively, the same strain was cultivated in a semi-synthetic medium resulting in a biomass with higher protein (60%) and lower lipid content (10%). SEM images showed addition of biomass yielded films with less debris compared to the pectin films. Incorporation of the low protein content biomass up to 15% did not significantly reduce the mechanical strength of the pectin films. In contrast, addition of protein-rich biomass (up to 20%) enhanced the tensile strength of the films (16.1–19.3 MPa). Lastly, the fungal biomass reduced the water vapor permeability of the pectin films.     

Does economic complexity lead to global carbon emissions convergence?

Environmental Science and Pollution Research - This study examines how economic complexity, along with human capital, total factor productivity, foreign direct investment, and trade openness, leads...     

Electrokinetic removal of chromium and copper from contaminated soils by lactic acid enhancement in the catholyte

The electrokinetic removal of chromium and copper from contaminated soils by adding lactic acid in cathode chamber as an enhancing reagent was evaluated. Two sets of duplicate experiments with chromium contaminated kaolinite and with a silty soil sampled from a supeffund site in Califomia of USA and polluted by Cr and Cu, were carried out in a constant current mode. Changes of soil water content and soil pH before and after the electrokinetic experiments, and variations of voltage drop and electroosmosis flow during the treatments were examined. The results indicated that Cr, spiked as Cr(Ⅵ) in the kaolinite, was accumulated mainly in the anode chamber, and some of Cr and metal hydroxides precipitated in the soil sections in contact with the cathode, which significantly increased electrical energy consumption. Treatment of the soil collected from the site showed accumulation of large amounts of Cr and Cu in the anode chamber while none was detected in the cathode one. The results suggested that the two metals either complexed with the injected lactic acid at the cathode or existed as negatively charged complex, and electromigrated toward the anode under a voltage gradient.     

The influence of processing and clarifier agents on the concentrations of potentially toxic elements (PTEs) in pekmez (a grape molasses-like syrup)

The changes in some potentially toxic elements (PTEs) including lead (Pb), cadmium (Cd), arsenic (As), iron (Fe), zinc (Zn), and copper (Cu) during pekmez (grape molasses-like syrup) processing and the utilization of various types of clarifiers (white soil, bentonite, and gelatin) in two levels (1.5 and 3% w/w) were analyzed. The average concentrations of Pb, Cd, As, Fe, Zn, and Cu in grape samples were measured as 0.055?±?0.005, 0.030?±?0.002, 0.044?±?0.002, 2.882?±?0.013, 2.372?±?0.088, and 1.194?±?0.01 μg g^?1. During pekmez production, the range of changes in Pb, Cd, As, Fe, Zn, and Cu was ?43.38% to 40.25%, ?55.49% to 0.23%, ?76.15% to 1.80%, ?74.15% to 58.47%, ?40.55% to ?18.12%, and ?83.16% to ?21.39%, respectively. The effect of the clarification process on the PTEs depended on the type and concentration of both PTE and clarifier agent used while the incorporation of gelatin resulted in a significant reduction in all of PT.

Graphical abstract

     

Electrokinetic remediation of a Cu-Zn contaminated red soil by controlling the voltage and conditioning catholyte pH

Electrokinetics is an innovative technique for treating heavy metals contaminated soil, especially low pH soils such as the Chinese red soil (Udic Ferrisols). In this paper, a Cu-Zn contaminated red soil is treated by electrokinetics. When the Cu-Zn contaminated red soil was treated without control of catholyte pH during the electrokinetic treatment, the soil pH in the soil sections near cathode after the experiment was high above 6, which resulted in accumulation of large amounts of Cu and Zn in the soil sections with such high pH values. Compared to soil Cu, soil Zn was more efficiently removed from the soil by a controlled electrokinetic method. Application of lactic acid as catholyte pH conditioning solution caused an efficient removal of Cu and Zn from the soil. Increasing the electrolyte strength (salt concentration) of the conditioning solution further increased Cu removal, but did not cause a significant improvement for soil Zn. Soil Cu and Zn fractions after the electrokinetic treatments were analyzed using sequential extraction method, which indicated that Cu and Zn precipitation in the soil section closest to the cathode in the treatments without catholyte pH control limited their removal from the soil column. When the catholyte pH was controlled by lactic acid and CaCl(2), the soil Cu and Zn removal percentage after 554 h running reached 63% and 65%, respectively. Moreover, both the residual soil Cu and Zn concentrations were lower than 100 mg kg(-1), which is adequate and meets the requirement of the Chinese soil environmental quality standards.