Electrodisinfection of real swine wastewater for water reuse

Environmental Chemistry Letters - Swine production generates large volumes of wastewater, rich in organic matter, nutrients and pathogens. Electrodisinfection is used to remove organic matter and...     

固相萃取-气质联用法测定固体废物浸出液中的二硝基苯

建立了一种利用固相萃取法对固体废物浸出液(TCLP)中二硝基苯进行萃取,DB-5石英毛细管柱(30 m×0.25 mm×0.25μm)进行分离,质谱检测器检测二硝基苯的方法。方法在0.002 0~0.020 0 mg/L之间线性关系良好,二硝基苯三种同分异构体的检出限均为0.5μg/L,模拟样品加标回收率为93%~96%,RSD≤2%;实际固体废物样品测定的加标回收率为95%~98%。     

Observation of atmospheric nitrous acid with DOAS in Beijing, China

Measurements of nitrous acid （HONO） and nitrogen dioxide （NO2） in Beijing City have been performed by means of a developed differential optical absorption spectroscopy （DOAS） system based on photodiode array （PDA）, during the autumn of 2004. HONO and NO2 were simultaneously identified by their characteristic absorption bands in the spectral region between 337 nm and 372 nm with high sensibility and time resolution. The concentrations of HONO exhibit obviously diurnal variation with a nocturnal maximum and a daytime minimum. The highest HONO value up to 11.8 μg/m^3 was observed during the night of 2/3 September. Possible sources of the observed HONO were discussed. Good correlation to NO2 indicates that NO2 is a main source component. The measurement also shows direct emission of HONO is an imnortant source in strongly polluted urban area.     

含硫酸盐高浓度有机废水预处理的试验研究

在含硫酸盐高浓度有机废水浸泡铁刨花的静态试验的基础上，进行了“铁床”处理高浓度糖厂生产废水的动态试验。通过稳定工况之后，“铁床”CODcr平均下降41．3％，SO4^2-平均下降56．2％，有利于后续厌氧生物处理，并达到以废治废的目的。     

潜流湿地对典型选控性有机污染物去除的预测

建立潜流湿地有机污染物迁移转化模型,采用多孔介质模型描述潜流湿地的水力特性,并引入Monod方程相耦合,实现对湿地系统内部流场及水质浓度的同时模拟。通过实验,校核模型参数,并验证模型。结果表明,该模型能较好模拟潜流湿地中有机污染物的去除效果;计算条件下,在不同基质填料的潜流湿地中都会出现滞水区和快速通道,影响水力效率与污染物去除效果;预测了不同填料系统中7种典型选控性有机污染物的去除效果,其处理效率:苯胺苯酚二甲苯甲苯苯硝基苯氯苯,可通过优选填料提高吸附量和延长停留时间来提高选控性有机物的处理效果。     

Effect on plant growth parameters and secondary metabolite content of lettuce (Lactuca sativa L.), coriander (Coriandrum sativum), and chili pepper (Capsicum annuum L.) watered with disinfected water by Ag-TiO2 nanoparticles

Environmental Science and Pollution Research - Nowadays, the use of different nanoscale structures has been introduced to a large number of research areas. One of these is the treatment and...     

分点进水高效除磷脱氮工艺工程应用研究

分点进水脱氮除磷新工艺以统一动力学理论、动力学负荷理论、污泥浓度优化理论、同步硝化反硝化理论、种群增殖速度的密度控制理论、种群增殖速度的营养工况控制理论等作为主要理论基础,具有脱碳、脱氮、除磷效率高,总停留时间短,运行费用较低的显著优点,在罗庄区污水深度处理工程改追中得到了成功应用,出水水质达到GB18918-2002<城镇污水处理厂排放标准>一级(A)标准.     

Environmentally Friendly Oil-Modified Polyesters as Polymeric Plasticizers for Poly(vinyl chloride)

Oil-modified polyesters were synthesized to serve as polymeric plasticizers for PVC. A total of four polymeric plasticizers with different average molecular weights were prepared. Characterizations were done using Fourier-transformed infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and gel permeation chromatography. Some of the tests conducted on PVC films include thermal stability test using thermogravimetric analyser, determination of glass transition temperature (T_g), plasticizer migration and leaching resistance test, morphology study of plasticized PVC films using field emission scanning microscope, toxicity test, and tensile test. Owing to the plasticizing effect of the palm oil-based compound, T_g of the plasticized PVC has decreased to an average of 65 °C at 20 wt% loading. The polymeric plasticizer is also able to contribute positively to the thermal stability and mechanical properties of the PVC films. Some of the advantages of incorporating polymeric plasticizer with high molecular weight includes lower rate of leaching from plastic, and improved tensile strength and elongation at break. Besides, thermal stability of the plastic studied using Kissinger’s and Flynn–Wall–Ozawa’s approaches shows that PVC blended with high molecular weight oil-modified polyester is more thermally stable, evidenced by the increase in the activation energy of decomposition, E_d. Toxicity test using brine shrimp egg shows encouraging results, where the oil-based plasticizer is considerably less toxic compared to some of the commercial plasticizers.     

Pesticide pressure and fish farming in barrage pond in Northeastern France. Part II: residues of 13 pesticides in water, sediments, edible fish and their relationships

Residues of pesticides in fish farming productions from barrage ponds are seldom studied in spite of increasing health questionings and environmental concerns. The purpose of this study is to establish the pesticide contamination profiles of sediments and edible fish from five ponds in Northeastern France. Multi-residues method and liquid chromatography–tandem mass spectrometry analysis were used to quantify 13 pesticides (azoxystrobin, carbendazim, clomazone, diflufenican, dimethachlor, fluroxypyr, iprodion, isoproturon, mesosulfuron-methyl, metazachlor, napropamid, quizalofop and thifensulfuron-methyl). Ten sediments and 143 muscles samples were analysed, corresponding to two successive fishing campaigns (first fishing date and second fishing date (P2), about 1 year later) on five sites (noted C-0, C-25, C-45, C-75 and C-85 to express the increasing gradient of crop area). Isoproturon was present in all sediments samples (1.8–56.4 μg/kg dry weight). During P2 period, carbendazim was quantified in the fish of site C-0 (0.09?±?0.02, 0.2?±?0.1 and 0.17?±?0.06 μg/kg wet weight (ww) for roach, carp and perch, respectively). Metazachlor was only quantified in perch of the site C-25 (0.13?±?0.02 μg/kg ww). Concentrations of isoproturon were similar for the sites C-45 and C-75 with 0.4?±?0.1 and 0.75?±?0.06 μg/kg ww for carp and perch, respectively. Contamination of fish reflected generally concentrations in surroundings. Isoproturon was the most concentrated and its main source was water for perch while carp was exposed through both water and sediments, highlighting their life strategies in pond.