High potential for the formation of haloacetic acids in the Karoon River water in Iran

The impact of the total organic carbon (TOC), chlorine dosage, water temperature, reaction time, pH, and seasonal variation on the formation of haloacetic acids (HAAs) in the Karoon River in Iran was studied. The results showed that dichloroacetic acid and trichloroacetic acid were the most detected HAA₅. The HAA₅ formation potential (HAA₅FP) levels in the Karoon River water in spring time, when the water TOC content exceeded 4 mg/L, were 1.38 times higher than during the winter season, when the water TOC content was below 3.5 mg/L. There was not a strong correlation between the HAA₅FP and the residence time for the Karoon River water. For the range of the water temperatures studied, there was little variation in the HAA₅FP in cold water, but in warmer water, the values of the HAA₅FP varied quickly.     

Removal and recovery of copper and nickel ions from aqueous solution by poly(methacrylamide-co-acrylic acid)/montmorillonite nanocomposites

Nanocomposite hydrogels based on poly(methacrylamide-co-acrylic acid) and nano-sized montmorillonite were prepared by aqueous dispersion and in situ radical polymerization. Optimum sorption conditions were determined as a function of montmorillonite content, contact time, pH, and temperature. The equilibrium data of Cu²⁺ and Ni²⁺ conformed to the Freundlich and Langmuir isotherms in terms of relatively high regression values. The maximum monolayer adsorption capacity of the nanocomposite hydrogel (with 3 wt% montmorillonite content), as obtained from the Langmuir adsorption isotherm, was found to be 49.26 and 46.94 mg g^?1 for Cu²⁺ and Ni²⁺, respectively, at contact time?=?60 min, pH?=?6.8, adsorbent dose?=?100 mg/ml, and temperature?=?318 K. Kinetic studies of single system indicated that the pseudo-second order is the best fit with a high correlation coefficient (R ²?=?0.97–0.99). The result of five times sequential adsorption–desorption cycle shows a good degree of desorption and a high adsorption efficiency.     

The formation of aerobic granular sludge for the treatment of real landfill leachate using a granular sequencing batch reactor at a constant volume

Leachate generated in a landfill may not be treated by conventional biological treatment due to its nature and complexity. The process of forming aerobic granules in batch sequencing reactors having features such as; reducing the settling process time and saving energy consumption and high decomposition rate have been noticed by researchers. In the present study, the structure of sequencing batch reactors (SBRs) was evaluated for the formation of granules, which were subsequently utilized for the treatment of landfill leachate. The experiment was initiated by using the GSBR, containing 1200 ml with different apparatuses, to develop granular sludge, and synthetic wastewater was added to reinforcement. The selected parameters for the operational hydraulic retention time (HRT) of the wastewater (6-h cycles) included feeding, idle, aeration, settling, and discharge. Furthermore, the controlled conditions were the dissolved oxygen (DO) range of 2–2.2 mg/L, temperature range of 20–23℃, and pH of 7.5–8.3. The chemical oxygen demand (COD), mixed liquor suspended solids (MLSS), and sludge volume index (SVI) daily were measured at the influent and effluent of GSBR reactor. The main properties of aerobic granular sludge were identified during the research procedures, and the remarkable settling and potent, high-density microbial structure of the granules were confirmed. The mean size of the formulated granules was estimated at 7.46 ± 1.8 mm, and the volume of the biomass also increased from approximately 1607 to 4137 mg/L through the granulation process. Moreover, 98% of the influent chemical oxygen demand (COD) could be removed by the formulated granular sludge, and the final-stage organic loading rate was estimated at 5.65 COD/m³/day. According to the results, GSBRs could be employed for the formulation of aerobic granular sludge for the treatment of landfill leachate.     

Multiple dimensions of work-related risk factors and their relationship to work ability among industrial workers in Iran

Objectives. The present study was designed to investigate the simultaneous effects of physical, psychosocial and other work-related risk factors on the work ability index (WAI) score among industrial workers. Methods. This study used a cross-sectional design with a questionnaire survey. A total of 280 workers were included in the study. Data were collected using three questionnaires including the Persian version of the WAI, the Persian version of the job content questionnaire and an author-developed measure (to assess work-related factors, health-related factors and socio-demographic characteristics). Results. The majority of the participants were young, but they had poor WAI scores (mean 37.3?±?6.4) and 44.3% of them had poor or moderate work ability. Occupational accidents and injuries were found to be the strongest predictors of WAI scores. Additionally, there was a strong association between WAI scores and supervisor support, skill discretion, occupational training, sleep quality, work nature and educational level. Conclusions. Intervention programs should focus on improving supervisor support, sleep quality, job skills and knowledge and on decreasing physical and mental work demands. Additionally, implementing a comprehensive occupational health and ergonomics program for controlling and reducing hazardous working environments and occupational injury rates should be considered.     

Synthesis, physicochemical characterizations and catalytic performance of Pd/carbon-zeolite and Pd/carbon-CeO2 nanocatalysts used for total oxidation of xylene at low temperatures

In this work, xylene removal from waste gas streams was investigated via catalytic oxidation over Pd/carbon-zeolite and Pd/carbon-CeO₂ nanocatalysts. Activated carbon was obtained from pine cone chemically activated using ZnCl₂ and modified by H₃PO₄. Natural zeolite of clinoptilolite was modified by acid treatment with HCl, while nano-ceria was synthesized via redox method. Mixed supports of carbon-zeolite and carbonceria were prepared and palladium was dispersed over them via impregnation method. The prepared samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller surface area (BET), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric (TG) techniques. Characterization of nanocatalysts revealed a good morphology with an average particle size in a nano range, and confirmed the formation of nano-ceria with an average crystallite size below 60 nm. BET analysis indicated a considerable surface area for catalysts (～1000 m²·g^?1). FTIR patterns demonstrated that the surface groups of synthesized catalysts are in good agreement with the patterns of materials applied in catalyst synthesis. The performance of catalysts was assessed in a low-pressure catalytic oxidation pilot in the temperature range of 100° C-250°C. According to the reaction data, the synthesized catalysts have been shown to be so advantageous in the removal of volatile organic compounds (VOCs), representing high catalytic performance of 98% for the abatement of xylene at 250°C. Furthermore, a reaction network is proposed for catalytic oxidation of xylene over nanocatalysts.     

Plants growing in a mining area: screening for metal accumulator plants possibly useful for bioremediation

A field study was conducted in an iron mine in Hamedan (Iran) to find native accumulator plants and to evaluate the extent of metal bioaccumulation in the naturally growing vegetation. The concentrations of total As, Cd, Cr, Fe, Mn, Mo, Ni, Pb, Si, and Zn were found to be higher in the mine than in soil. These plants accumulated the highest amounts of the following metals in their roots: Euphorbia cheiradenia As, Stipa barbata Cd, Pb and Cr, Euphorbia macroclada Cu, Centaurea iberica Fe, Reseda lutea Mo, Salvia spinosa Ni and Zn, and Xanthium strumarium Se. In the aerial parts, the highest metal accumulation was found in Epilobium fragilis As, Carthamus oxyacantha Cd, Fe, Mn, and Pb, Verbascum speciosum Cu, Centaurea iberica Mo, Salvia spinosa Ni and Cr, Glaucium grandiflorum Se, and Malva neglecta Zn. Enrichment factors and bioconcentration factors were also determined; C. oxyacantha, S. spinosa, M. neglecta, C. iberica, V. speciosum, G. grandiflorum, and E. fragilis are the most effective accumulators and are proposed for phytoremediation of polluted soils.     

Phytoextraction of heavy metals from contaminated soil,water and atmosphere using ornamental plants: mechanisms and efficiency improvement strategies

Environmental Science and Pollution Research - Accumulation of heavy metals (HMs) in soil, water and air is one of the major environmental concerns worldwide, which mainly occurs due to...     

Molecular and serological study on congenital toxoplasmosis in newborn of Shiraz,Southern Iran

Environmental Science and Pollution Research - Toxoplasmosis is a zoonotic disease caused by an obligatory intracellular parasite, Toxoplasma gondii. The congenital form of the disease is a...     

Determination of aluminum and zinc in Iranian consumed tea

To determine aluminum and zinc in Iranian consumed tea, 31 tea samples were analysed for Al and Zn concentration of tea leaves and tea infusion. The results show that average concentration of Al and Zn in tea leaves was 326 and 50.7 mg. Kg(-1) respectively in this regard Nemoneh and Shahrzad show the highest and lowest concentration respectively in term of Al, also Debsh and Alkozi follow same situation in Zn concentration. Also the solubility of metals in the first infusion was significantly (Al, Zn: P < 0.01) higher than the second infusion and the solubility in the second infusion was also significantly higher than the third infusion (Al: P < 0.01; Zn: P < 0.05). Al leachate in the first infusion (2 min) for Mosama and Seilan tea was highest and lowest respectively. Also in the second and third infusion (5 and 10 min) Golkis and Nemoneh tea show the highest and lowest figures respectively. On the other hand, data from Zn transfer in tea infusion in the first infusion show that Mosama and Ahmad Atry tea have the highest and lowest leachate percentage respectively, while in the second and third infusion Mosama and Golkis tea follow the same situation. Calculation of percentage 'available' Al and Zn to the human system showed that 1 l of tea can provide 37.2% of the daily dietary intake of Al, the percentage 'available' for absorption in the intestine is only 1.78% for overall mean Al concentration. Also daily dietary intake of Zn was 2.13% while percentage available for absorption in the intestine was 0.72%.