Removal of pesticides from secondary treated urban wastewater by reverse osmosis

Environmental Science and Pollution Research - The residues of pesticides that reach water resources from agricultural activities in several ways contaminate drinking water resources and threaten...     

Effects of aqueous suspensions of titanium dioxide nanoparticles on Artemia salina: assessment of nanoparticle aggregation, accumulation, and toxicity

Aquatic stability and impact of titanium dioxide nanoparticles (TiO₂ NPs, 10–30 nm) were investigated using Artemia salina. Acute exposure was conducted on nauplii (larvae) and adults in seawater in a concentration range from 10 to 100 mg/L TiO₂ NPs for 24 and 96 h. Rapid aggregation occurred in all suspensions of TiO₂ NPs to form micrometer size particles. Yet, both nauplii and adults accumulated the aggregates significantly. Average TiO₂ content in nauplii ranged from 0.47 to 3.19 and from 1.29 to 4.43 mg/g in 24 and 96 h, respectively. Accumulation in adults was higher ranging from 2.30 to 4.19 and from 4.38 to 6.20 mg/g in 24 and 96 h, respectively. Phase contrast microscopy images revealed that Artemia were unable to excrete the particles. Thus, the TiO₂ aggregates filled inside the guts. No significant mortality or toxicity occurred within 24 h at any dose. Lipid peroxidation levels characterized with malondialdehyde concentrations were not statistically different from those of the controls (p?>?0.05). These results suggested that suspensions of the TiO₂ NPs were nontoxic to Artemia, most likely due to the formation of benign TiO₂ aggregates in water. In contrast, both mortality and lipid peroxidation increased in extended exposure to 96 h. Highest mortality occurred in 100 mg/L TiO₂ NP suspensions; 18 % for nauplii and 14 % for adults (LC₅₀?>?100 mg/L). These effects were attributed to the particle loading inside the guts leading to oxidative stress as a result of impaired food uptake for a long period of time.     

Green growth and OECD countries: measurement of country performances through distance-based analysis (DBA)

When we measure countries’ socioeconomic development, the standalone National Income approach does not to reflect well-being of the citizens. An analysis of a country's welfare should consider the combination of different aspects such as economic indicators, environmental and resource productivity, and economic opportunities. In the light of these discussions, the concept of green growth arose as a contemporary approach to reframe the mainstream growth model and to re-evaluate many of the investment decisions in meeting agricultural, energy and water needs and the resource demands of economic development. This paper evaluates the green growth performance of OECD countries by applying the I-distance method by integrating the economic, social, and environmental aspects of countries’ performances simultaneously. Using multivariate I-distance approach, selected green growth indicators and numerous different variables have been synthesized into one value. According to our analysis, Sweden, Luxemburg, Norway and Denmark occupy the top places by their outstanding green performance. On the other hand, Mexico, Poland and Greece are placed at the bottom as a consequence of their relatively weak environmental performance.

     

Impact of combining chlorine dioxide and chlorine on DBP formation in simulated indoor swimming pools

The main objective of this study was to assess the combined use of chlorine dioxide (ClO2) and chlorine (Cl2) on the speciation and kinetics of disinfection by-product (DBP) formation in swimming pools using synthetic pool waters prepared with a body fluid analog (BFA) and/or fresh natural water. At 1:25 (mass ratio) of ClO2 to Cl2, there was no significant reduction in the formation of trihalomethanes (THMs) and haloacetic acids (HAAs) for both BFA solution and natural water compared to the application of Cl2 alone. When the mass ratio of ClO2 to Cl2 increased to 1:1, substantial decreases in both THMs and HAAs were observed in the natural water, while there was almost no change of DBP formations in the BFA solution. Haloacetonitriles and halonitromethanes levels in both water matrices remained similar. In the presence of bromide, the overall DBP formation increased in both BFA solution and natural water. For the DBP formation kinetics, after 72 hr of contact time, very low formation of THMs and HAAs was observed for the use of ClO2 only. Compared to Cl2 control, however, applying the 1:1 mixture of ClO2/Cl2 reduced THMs by > 60% and HAAs by > 50%. Chlorite was maintained below 1.0 mg/L, while the formation of chlorate significantly increased over the reaction time. Finally, in a bench-scale indoor pool experiment, applying ClO2 and Cl2 simultaneously produced less THMs compared to Cl2 control and kept chlorite at < 0.4 mg/L, while HAAs and chlorate accumulated over 4-week operation period.     

Developing a Decision-Support System for Waste Management in Aluminum Production

Industrial enterprises constitute a major portion of the world’s economy, as well as a large proportion of a country’s businesses and total employment. In Turkey, industrial enterprises are underdeveloped in terms of knowledge, skill, capital, and particularly accessing and benefiting from the advantages provided by modern information and communication technologies. Aluminum manufacturing has been reported to be the largest industry in Turkey with respect to production volumes and application fields. However, aluminum production is known to be an important contributor to environmental pollution, and the relative contribution of other related enterprises to the total industrial environmental impact is unknown. Environmental pollution sources can typically be classified into three categories: gaseous emissions, solid wastes, and wastewaters. The types of wastes produced by aluminum production vary based on the process line used, the variety of target products produced, and the production capacity of a given plant. As the capacities of facilities grow, the type and amount of waste become more variable. Therefore, the primary objective of this study is to determine the priority of each waste type in aluminum manufacturing industries. This study was conducted in the Industrial Zone of Kayseri in Turkey. Three different facilities that range in size from large to small based on their production volume, plant capacity, and variety of production are selected for this study. The priority of waste types was determined by combining the AHP and PROMETHEE II multicriteria decision methods. While wastewater was categorized as having the highest priority in large facilities, solid waste was determined to be the highest priority in medium and small facilities.     

Persistence and behavior of pesticides in cotton production in Turkish soils

Turkey is the sixth largest producer of cotton in the world. Two of the most commonly applied pesticides used in cotton production are trifluralin and endosulfan. Although both are very effective at controlling pests, their persistence in the environment poses risks to human health and the environment. Four loam soils and one silty-loam soil were studied to evaluate the persistence of trifluralin and endosulfan in relation to soil characteristics. Degradation with trifluralin reached as high as 70% of the applied doses. Soils with the highest organic matter content had the lowest degradation rate, indicating a tighter sorption of trifluralin. Endosulfan degradation was a function of soil type and the specific isomer, with β-endosulfan depicting the highest degradation.     

Olive tree, Olea europaea L., leaves as a bioindicator of atmospheric PCB contamination

Olive tree leaf samples were collected to investigate their possible use for biomonitoring of lipophilic toxic substances. The samples were analyzed for 28 polychlorinated biphenyls (PCB) congeners. Twelve congeners were detected in the samples. PCB-60, 77, 81, 89, 105, 114, and 153 were the most frequently detected congeners ranging from 32 % for PCB-52 to 97 % for PCB-81. Σ₁₂PCBs concentration varied from below detection limit to 248 ng/g wet weight in the sampling area, while the mean congener concentrations ranged from 0.06 ng/g (PCB-128?+?167) to 64.2 ng/g wet weight (PCB-60). Constructed concentration maps showed that olive tree leaves can be employed for the estimation of spatial distrubution of these congeners.     

The statistical investigation on airborne fungi and pollen grains of atmosphere in Izmir-Turkey

This study aims to investigate the differences in the concentrations of airborne fungi and pollens between the towns located in the province of Izmir and to determine the factors contributing to these differences. Five stations in each of four towns (Buca, Konak, Bornova, and Karsiyaka) were randomly selected as the research areas. Fungus (cfu/m³) and pollen counts (cm²/pollen count) in the air samples collected from each station between June 2003 and May 2004 were measured. The results revealed that whereas Karsiyaka had the highest fungus concentration (521.33 ± 777.1), Buca and Bornova had the lowest concentration (482.67 ± 308.44). The mean fungus concentration in the province of İzmir was 501.5 ± 486.7. Pollen concentration was the highest in Konak (486.67 ± 839.06) and the lowest in Bornova (369.83 ± 551.13). Fungus and pollen concentrations revealed no difference between the towns (p > 0.05). The relationship between pollen-fungus concentrations and temperature-dust-humidity-sulphurdioxide was investigated but it was found statistically insignificant (p > 0.05). As a result of regression analysis, it was determined that correlation of atmospheric parameters had no effects on pollen and fungus concentrations (p > 0.05).     

The Evaluation of Mesoporous Materials as Catalyst in Fast Pyrolysis of Wheat Straw

In this study, wheat straw was chosen as a biomass sample and the fast pyrolysis of this sample was carried out with or without catalyst at different conditions in a well-swept fixed-bed reactor. Experiments were carried out in a well-swept tubular fixed-bed reactor with a heating rate of 300°C/min, between pyrolysis temperature ranges 300–800°C in the nitrogen atmosphere. The results indicated that a maximum oil yield of 31.9% was obtained at a pyrolysis temperature of 500°C in non-catalytic procedure. Siliceous and Al-MCM-41 materials were evaluated as potential catalysts in the pyrolysis experiments. Mesoporous materials have large pore dimensions with strong acid sites. These acidic sites catalyze some reactions in pyrolysis. The product yields and the quality of bio-oil were influenced with using MCM-41 materials. The bio-oil yield was reduced, whereas the gas yield increased with using a catalyst in the experiments. An increase in the fractions of pure phenol, alkyl phenols, alkenes+alkanes, carbonyls, aromatic, and cyclic compounds and a decrease in the fractions of methoxy phenols, acids+esters, furans, and alcohols were observed in the presence of Al-MCM-41 material. According to all results, the use of Al-MCM-41 materials as catalyst in the pyrolysis can be suggested to obtain both quality fuels and valuable chemicals.