Monitoring of growth and physiological activities of biofilm during succession on polystyrene from activated sludge under aerobic and anaerobic conditions

The present research work monitored the successive biofilm development and its catabolic role in the degradation of polystyrene (PS). PS material was artificially colonized with biofilm by incubating it with activated sludge under aerobic and anaerobic conditions. Biofilm formation was monitored by gravimetric weight analysis, spectrophotometric absorbance technique, heterotrophic plate count, and scanning electron microscopy under aerobic and anaerobic conditions. The wet weight (1.59 and 1.17 g) and dry weight (0.41 and 0.08 g) of a biofilm showed a significant constant increase under aerobic and anaerobic conditions, respectively, from first till 9 weeks of incubation. Plate count of the selected bacteria (Escherichia coli, Salmonella typhimurium, Shigella dysenteriae, Pseudomonas aeruginosa) considerably declined (90–99 %) in the biofilm after seventh and fifth weeks of incubation under aerobic and anaerobic conditions, respectively, indicating a positive shift from pathogenic to beneficial microbial community. While most probable number index of fecal coliforms and E. coli in the sludge showed more reduction (98 and 99 %) under aerobic as compare to anaerobic conditions (86 and 91 %) after 9 weeks of biofilm formation on PS cubes. Correspondingly, the decreasing levels of chemical oxygen demand and biochemical oxygen demand (up to 73 %) showed signs of sludge digestion. Scanning electron microscope coupled with energy dispersive X-ray spectroscope revealed nature of PS media containing high carbon content. However, biofilm development proved to be involved in the biochemical transformation of the PS medium as indicated by Fourier transform infrared spectroscopy.     

An HPLC method development for the assessment of degradation products of anthraquinone dye

The behavior of metsulfuron-methyl and its residues in an artificial pond was studied using a ¹⁴C isotopic tracer technique. Throughout the experimental period, the majority of metsulfuron-methyl residues were sustained in the pond water. Furthermore, the metsulfuron-methyl residues were just found in the surface layer of the sediment, and the transfer distance of these residues had only reached 9?C12 cm by the end of the experiment. The extract residues of metsulfuron-methyl in sediment were slightly higher than those of the bound residues (BR) during the initial experiment stage, while the BR dominated the surface sediment after 45 days. Finally, the metsulfuron-methyl residues could be combined with humus in the surface sediment, and the distribution of metsulfuron-methyl residues in fulvic acid was significantly higher than that in humic acid.     

Selective separation and preconcentration studies of chromium(VI) with Alamine 336 supported liquid membrane

Chromium compounds have received considerable attention because these are used extensively in such industrial applications as electroplating, steelmaking, tanning of leather goods, and corrosion inhibition. The use of supported liquid membranes (SLMs) to remove metals from wastewaters has actively been pursued by the scientific and industrial community. In the present work, the selective separation and preconcentration of Cr(VI) ions has been studied by using a commercial amine as the membrane liquid on the porous polypropylene support. Permeation experiments were conducted on a laboratory scale batch reactor made up of perspex, with a memberane fixed amid the two chambers. The flux of Cr(VI) ions was found to be maximum (3.15?×?10^?5?mol?cm^?2?s^?1) around pH 1. Above and below this pH the flux decreases. Distribution studies show that an increase in the amine concentration leads to higher distribution coefficients at fixed pH values. At pH around unity, the distribution of Cr(VI) ions into the organic phase was found to be maximum, of the order of 56.3. The Cr(VI) transport through the membrane increases with rise in temperature. In order to check the long-term efficiency of the flat sheet SLM, an experiment was conducted with higher Cr(VI) concentration (5000?ppm) for 24?h, at optimised parameters. It was observed that in 24?h, about 1/5th of the feed Cr(VI) is left over while the rest is transported. However, minute organic droplets were also seen in the feed and strip compartments, after 1 day. This observation suggested the loss of membrane liquid. The feasibility of preconcentration of Cr(VI) by using the proposed SLM parameters, was also studied by using the hollow fibre (HF) system. Highest enrichment factor (E.F) value was obtained for 50?mg?L^?1 whereby all of the metal was transported to the stripping phase and the resulting Cr concentration was 688?mg?L^?1 (E.F?=?13.8). It was observed that while treating more diluted solutions, the enrichment factor decreases. The values of E.F equal to 8.9 and 11.3 were found for initial Cr concentration of 10 and 30?mg?L^?1.     

Total petroleum hydrocarbon burden in fish tissues from the Arabian Gulf

The levels of total petroleum hydrocarbons (TPH) and lipid contents have been reported for eight commercially important fish species from the Arabian Gulf. GC-FID has been used as quantification technique. Out of the species analyzed, Scarus ghabon showed the highest level of TPH (7.4 ± 3.2 µg g^?1) in the muscle tissue followed by Epinephelus tauvina (6.8 ± 3.6 µg g^?1). Except for E. microdon (4.8 ± 2.1 µg g^?1), all other fish species showed a similar level of TPH concentration. Significant correlations were obtained between lipid contents and TPH levels in the muscles of the fish. Body weight of the fish was also found to be strongly correlated with TPH concentration in the muscle tissue. There is a tendency of accumulating higher TPH in the winter season as compared to in the summer season.     

An investigation of anthraquinone dye biodegradation by immobilized Aspergillus flavus in fluidized bed bioreactor

Purpose

Biodegradation and biodecolorization of Drimarene blue K₂RL (anthraquinone) dye by a fungal isolate Aspergillus flavus SA2 was studied in lab-scale immobilized fluidized bed bioreactor (FBR) system.

Method

Fungus was immobilized on 0.2-mm sand particles. The reactor operation was carried out at room temperature and pH?5.0 in continuous flow mode with increasing concentrations (50, 100, 150, 200, 300, 500?mg?l^?1) of dye in simulated textile effluent on the 1st, 2nd, 5th, 8th, 11th, and 14th days. The reactors were run on fill, react, settle, and draw mode, with hydraulic retention time (HRT) of 24?C72?h. Total run time for reactor operation was 17?days.

Results

The average overall biological oxygen demand (BOD), chemical oxygen demand (COD), and color removal in the FBR system were up to 85.57%, 84.70%, and 71.3%, respectively, with 50-mg?l^?1 initial dye concentration and HRT of 24?h. Reductions in BOD and COD levels along with color removal proved that the mechanism of biodecolorization and biodegradation occurred simultaneously. HPLC and LC?CMS analysis identified phthalic acid, benzoic acid, 1, 4-dihydroxyanthraquinone, 2,3-dihydro-9,10-dihydroxy-1,4-anthracenedione, and catechol as degradation products of Drimarene blue K₂RL dye. Phytotoxicity analysis of bioreactor treatments provided evidence for the production of less toxic metabolites in comparison to the parent dye.

Conclusion

The present fluidized bed bioreactor setup with indigenously isolated fungal strain in its immobilized form is efficiently able to convert the parent toxic dye into less toxic by-products.     

The relationship between staple food crops consumption and its impact on total factor productivity: does green economy matter?

The agriculture sector is a key driver of economic growth and provides employment opportunities across the globe generally. However, in today’s world, agricultural product demand is more influenced by taste, prices, and nutritional value due to climatic variation. The study has analyzed the current situation grain productivity by using the data of farm inputs and major grain crops of Pakistan from (1960–2020). The study consists of a two-stage analysis in the first stage, the total factor productivity (TFP) variable is obtained by using the parametric Tornqvisit-Theil index output-input-aggregation method separately for each crop; rice, maize, and wheat. After that, the unit root test is used to check the stationarity and trend of the variables in the long run. Subsequently, the autoregressive distributed lag (ARDL) model is applied to check the existence of cointegration in the long run and short run among the variables. The results of the study disclosed that the consumption of rice has a positive relationship with its total factor productivity, but, wheat and maize have a negative long-run cointegration relationship with the respective productivities. The study results have shown that the consumption pattern of staple crops has substantially changed, due to climatic variation, and the current food consumption trend is revealing new dimensions and trends owing to variation in climate change and anthropogenic pressure which demands to adapt climate resilient farm practices.