Cadmium content of wheat grain from a long-term field experiment with sewage sludge

Grain Cd concentrations were determined in the wheat (Triticum aestivum L.) cultivars Soissons, Brigadier, and Hereward grown in 1994,1996, and 1999, respectively, in soils of a long-term field experiment to which sewage sludges contaminated with Zn, Cu, Ni, or Cr had previously been added. Soil pore water soluble Cd and free Cd2+ increased linearly with increasing total soil Cd (R2=0.82 and 0.84, respectively; P<0.001). Similarly, soil pore water free Cd2+ increased linearly with increasing soil pore water soluble Cd (R2=0.98; P<0.001). There was no evidence of a plateau in soil pore water Cd concentrations with increasing soil Cd concentrations. Grain Cd concentrations were significantly correlated with total soil Cd (P<0.001), soil pore water Cd (P<0.001), and free Cd2+ (P<0.001). A slight curvilinear relationship between grain Cd and soil Cd was apparent, but there was no plateau, even at the maximum soil Cd concentration of about 2.7 mg kg(-1). The relationship between soil pore water Cd and grain Cd was linear for all three cultivars. The slopes were in the order 1994 > 1996 > 1999, with more Cd being taken up into the grain by Soissons grown in 1994, and least by Hereward grown in 1999. For Soissons, Cd concentration in the grain greater than the EU limit (0.24 mg kg(-1) dry wt.) occurred at soil Cd less than the current UK limit of 3 mg kg(-1) for soils receiving sewage sludge. In contrast, for Brigadier and Hereward, grain Cd concentrations were near to and less than the EU limit, respectively, at soil Cd concentrations of 3 mg kg(-1).     

Minimization of the formation of disinfection by-products

The drinking water industry is required to minimize DBPs levels while ensuring adequate disinfection. In this study, efficient and appropriate treatment scheme for the reduction of disinfection by-product (DBPs) formation in drinking water containing natural organic matter has been established. This was carried out by the investigation of different treatment schemes consisting of enhanced coagulation, sedimentation, disinfection by using chlorine dioxide/ozone, filtration by sand filter, or granular activated carbon (GAC). Bench scale treatment schemes were applied on actual samples from different selected sites to identify the best conditions for the treatment of water. Samples were collected from effluent of each step in the treatment train in order to analyze pH, UV absorbance at 254 nm (UVA₂₅₄), specific UV absorbance at 254 nm (SUVA₂₅₄), dissolved organic carbon (DOC), haloacetic acids (HAAs) and trihalomethanes (THMs). The obtained results indicated that using pre-ozonation/enhanced coagulation/activated carbon filtration treatment train appears to be the most effective method for reducing DBPs precursors in drinking water treatment.     

Assessment of El-Salaam underground water for poultry use

Water quality for 13 wells in El-Salaam, in a new city near Cairo, has been investigated. Those wells were dug specifically to provide water for a company specializing in broiler poultry production. The water was analyzed for the following bacteriological parameters: total bacterial counts (10²–10⁴), total coliforms (<1?10²), fecal coliforms (<1?10²) fecal streptococci (<1?10³), aerobic spore formers (10²–10⁴) and total counts for Clostridia (<1?10³) per 100 mL. Chemical parameters such as pH, sulphate, alkalinity, hardness, and pesticides indicate that the water is unacceptable for poultry production. This study illustrates the need for monitoring and maintaining the integrity of groundwater sources at El-Salaam.     

Residues and dissipation kinetic of abamectin,chlorfenapyr and pyridaben acaricides in green beans (Phaseolus vulgaris L.) under field conditions using QuEChERS method and HPLC

Abstract

The current study estimated the dissipation rates of abamectin, chlorfenapyr and pyridaben acaricides in pods of green beans (Phaseolus vulgaris L.) under field conditions in Egypt. Pesticides were extracted and cleaned-up by QuEChERS method and were analyzed by HPLC. The dissipation of these acaricides followed the first order kinetics model with half-life (t_1/2) values 1.00, 3.50 and 1.50?days for abamectin, chlorfenapyr and pyridaben, respectively. The lowest residues, at different time intervals of field application rate of each pesticide, were observed with abamectin followed by pyridaben and then chlorfenapyr. Pre-harvest intervals (PHIs) were 10.00, 13.50 and 6.00?days for abamectin, chlorfenapyr and pyridaben, respectively and were below the established European maximum residue limits (EU MRLs) 10–14, 14–21 and 7–10?days after application, respectively. If the fresh pods will be consumed after harvest, it is expected that the presence of these pesticides in the food will have a negative impact on human health. Therefore, the elimination of the residues of these harmful pesticides must be carried out.     

Cobalt separation from waste mobile phone batteries using selective precipitation and chelating resin

Separation of cobalt from mixed-waste mobile phone batteries containing LiCoO₂ cathodic active material was investigated using selective precipitation and chelating resin. Cobalt was recovered from the active powder materials containing 47 % Co oxide together with Mn, Cu, Li, Al, Fe, and Ni oxides. The metal ions were leached sufficiently using 4 M HCl. The metal ions detected spectrophotometrically were removed from the leaching solution by selective precipitation at pH 5.5, with cobalt loss of 27.5 %. Conditions for achieving a recovery of Co in the filtrate by chelating resin were determined experimentally by varying the pH and time of the reaction, as well as the initial resin-to-liquid ratio. The cobalt was efficiently determined by absorption spectrometry at λ _max 510 nm. Chelating polyamidoxime resin was synthesized by polymerization of acrylonitrile and followed by amidoximation reaction. Physically cross-linked gel of polyacrylonitrile was made by a cooling technique.     

Development and validation of HPLC methods for analysis of chlorantraniliprole insecticide in technical and commercial formulations

Effective, selective, precise and accurate liquid chromatographic analytical methods for the analysis of a novel chlorantraniliprole insecticide in technical and formulation (coragen, 20% SC) have been optimized and validated. Eight methods were designed based on different mobile phases, temperature and two HPLC columns. The mobile phase consists of two mixtures (acetonitrile:water, 70:30 and methanol:water, 70:30) with 25 or 40ºC. HPLC analysis of chlorantraniliprole was carried out at a wavelength of 260 nm, with a flow rate of 0.8 mL/min. The calibration curves showed a good linear relationship (R² ? 0.99) in the injected quantities ranged from 0.0125 to 1.00 μg. Limit of detection (LOD) was found to be 3.94 to 14.56 ng and from 5.95 to 12.93 ng using the analytical methods I to IV by MicroPack CN-10 and V-VIII by ZORBAX Eclips Plus C18 columns, respectively, based on SDslope values. ZORBAX Eclips Plus C18 column with method VI was the best one (R² = 1.00 and RSD = 0.30), short retention time (4.936 min), high theoretical plates per column (65457.15) compared to others and LOD = 6.49 ng. The accuracy of the best method was demonstrated by recovery rates of 83.04% to 98.50% for grape samples supplemented with 5, 10 and 50 mg chlorantraniliprole/kg.     

Soil solid-phase controls lead activity in soil solution

Lead pollution of the environment is synonymous with civilization. It has no known biological function, and is naturally present in soil, but its presence in food crops is deemed undesirable. The concern regarding Pb is mostly due to chronic human and animal health effects, rather then phytotoxicity. However, not much is known about the chemistry and speciation of Pb in soils. We determined the activity of Pb2+, in near neutral and alkaline soils, representative of alluvial, desertic and calcareous soils of Egypt, using the competitive chelation method. Lead activity ranged from 10(-6.73) to 10(-4.83) M, and was negatively correlated with soil and soil solution pH (R2 = -0.92, P < 0.01 and R2 = -0.89, P < 0.01, respectively). It could be predicted in soil solution from the equation: log(Pb2+) = 9.9 - 2pH. A solubility diagram for the various Pb minerals found in soil was constructed using published thermodynamic data obtained from the literature, and our measured Pb2+ activities compared with this information. The measured Pb2+ activities were undersaturated with regard to the solubility of PbSiO3 in equilibrium with SiO2 (soil). However, they were supersaturated with regard to the solubilities of the Pb carbonate minerals PbCO3 (cerussite) and Pb3(CO3)2(OH)2 in equilibrium with atmospheric CO2 and hydroxide Pb(OH)2. They were also supersaturated with regard to the solubilities of the Pb phosphate minerals Pb3(PO4)2, Pb5(PO4)3OH, and Pb4O(PO4)2 in equilibrium with tricalcium phosphate and CaCO3. The activity of Pb2+ was not regulated by any mineral of known solubility in our soils, but possibly by a mixture of Pb carbonate and phosphate minerals.     

Adsorption and thermodynamic parameters of chlorantraniliprole and dinotefuran on clay loam soil with difference in particle size and pH

The behavior of chlorantraniliprole (CAP) and dinotefuran (DNF) insecticides was investigated in clay loam soil, a common type of the Egyptian soil. Effect of temperature, pH and particle size of the soil on the adsorption process was studied. Adsorption isotherm by bulk soil and its constituents; humic acid (HA), clay, silt and sand fractions was measured using batch equilibration technique. The results showed that the adsorption of the insecticides tested was significantly affected by the temperature and was a spontaneous interfacial process in the soil. Freundlich model accurately predicted the adsorption behavior of both insecticides. The interaction between soil and insecticides was endothermic and the highest adsorption for CAP and DNF was obtained at pH 9. However, the effect of pH on the adsorption of DNF was lower than that of CAP. Sorption of CAP and DNF on HA fraction was significantly greater than on clay fraction and bulk soil. In addition, the adsorption was significantly increased with particle size decrease. It could be inferred that the adsorption of CAP and DNF on clay loam soil was physical in nature and greatly influenced by the soil components, pH and temperature.     

Optimization and characterization of the formation of oil-in-water diazinon nanoemulsions: Modeling and influence of the oil phase,surfactant and sonication

Nanoemulsions are particularly suitable as a platform in the development of delivery systems for lipophilic functional agents. Current research describes the formation of oil-in-water (O/W) diazinon nanoemulsions using synthetic and natural additives by adopting a high-energy (ultrasound) emulsification method. The diazinon nanoemulsions were spontaneously formed by adding dropwise a mixture of diazinon, solvent and co-solvent in an aqueous solution containing a surfactant (tween or lecithin) with continuous stirring. The nanoemulsions were then formed by ultra-sonication. The effects of three levels of active ingredient, solvent, co-solvent, surfactant, sonication time and sonication cycle and power were performed by Minitab software to design the experiment. Effects of these factors on droplet size, polydispersity index (PDI), viscosity and pH of nanoemulsions were investigated. The results of the modeling showed that the experimental data could be adequately adapted in a second-order polynomial model with a multiple regression coefficient r² of 0.821 for the prediction of particle size, PDI and viscosity. The long-term and thermodynamic stability of the prepared nanoemulsions were tested. The droplet size and morphology of the nanoemulsions were measured by dynamic light scattering (DLS) and transmission electron microscopy (TEM). On this basis, a water-insoluble insecticide diazinon was incorporated into 26 optimized nanoemulsion systems to demonstrate potential applications in pest control. The results of DLS and TEM measurements showed that most of prepared nanoemulsions had an almost monodisperse droplet size distribution (PDI < 200 nm). Incorporation of diazinon had no significant effect on the size and stability of the nanoemulsions and the formulated nanoemulsion remained stable after four months of storage.     

Visible light sensitive activated carbon-metal oxide (TiO2, WO3, NiO,and SnO) nano-catalysts for photo-degradation of methylene blue: a comparative study

Four composites of metal oxide doped with activated carbon with a metal oxide weight of 20% were prepared using mechano-mixing method. The nano-catalysts were characterized by N₂-adsorption–desorption, X-ray diffraction analysis, transmission electron microscopy, Fourier-transform infrared spectroscopy, UV-diffuse reflectance, and photoluminescence spectroscopy. Photo-catalytic degradation of methylene blue dye under UV 254 nm and visible light was examined. In general, prepared catalysts are more active for degradation of dye under visible light than UV, reaching 96% within 180?min irradiation using the SnO catalyst. Photo-degradation of methylene blue followed pseudo first order reaction mechanism with a rate constant of 14.8?×?10^?3?min^?1, and the time required for removal of 50% of dye was 47?min.