Bioaccumulation and depuration of chromium in the selected organs and whole body tissues of freshwater fish Cirrhinus mrigala individually and in binary solutions with nickel

Contamination of aquatic ecosystems with heavy metals has been receiving increased worldwide attention due to their harmful e ects on human health and other organisms in the environment. Most of the studies dealing with toxic e ects of metals deal with single metal species, while the aquatic organisms are typically exposed to mixtures of metals. Hence, in order to provide data supporting the usefulness of freshwater fish as indicators of heavy metal pollution, it has been proposed in the present study to investigate the bioaccumulation and depuration of chromium in the selected organs of freshwater fingerlings Cirrhinus mrigala, individually and in binary solutions with nickel. The results show that the kidney is a target organ for chromium accumulation, which implies that it is also the “critical” organ for toxic symptoms. The results further show that accumulation of nickel in all the tissues of C. mrigala is higher than that of chromium. In addition, the metal accumulations of the binary mixtures of chromium and nickel are substantially higher than those of the individual metals, indicating synergistic interactions between the two metals. Theoretically the simplest explanation for an additive joint action of toxicants in a mixture is that they act in a qualitatively similar way. The observed data suggest that C. mrigala could be suitable monitoring organisms to study the bioavailability of water-bound metals in freshwater habitats.     

Bioaccumulation of lead and the influence of chelating agents in Catla catla fingerlings

Lead is a widespread element and one of the persistent and cumulative pollutants of the environment. The present study deals with the bioaccumulation of lead and the influence of chelating agents, meso 2,3-dimercaptosuccinic acid (DMSA), D-Penicillamine and CaNa₂EDTA in reducing the concentration of lead on the selected organs of Catla catla fingerlings for both acute and chronic exposures by using ICP-AES. It is inferred from the present findings that there was a correlation between environmental conditions and the heavy metal contents of the fish. The highest concentration of lead is found in kidney tissues and the lowest in muscle tissues. The accumulation pattern of lead in the selected organs of Catla catla is: kidney > liver > gill > brain > muscle. Also, it has been found that the treatment of chelating agents, DMSA, D-Penicillamine and CaNa₂EDTA reduces the concentration of lead significantly for both acute and chronic exposures. The results also show that DMSA is the most effective chelator of lead in reducing the body burden of C. catla fingerlings. The observed data further indicate that C. catla could be suitable for monitoring organisms to study the bioavailability of water-bound metals in freshwater habitats.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

Effect of acute concentration of zinc on the biochemical contents of brain of Labeo rohita: an FT-IR study

Heavy metal discharges to aquatic environment are of great concern due to their toxicity and accumulative behavior. Zinc is an essential trace element required for different physiological functions and plays important role in cellular metabolism. However, it becomes toxic when elevated concentrations are introduced into the environment. The aim of this work is to analyze zinc induced biochemical changes in the brain tissues of Labeo rohita fingerlings using Fourier Transformation Infrared Spectroscopy. Several important features have been observed in the zinc intoxicated brain tissues, namely, altered membrane lipid, altered protein profile and decreased glycogen content, indicating an alteration in the lipid and protein profiles leading to modification in membrane composition. Further, it is observed that the acute exposure to zinc causes some alteration in protein profile with a decrease in α-helix and an increase in random coil structures.     

Analysis of Mosses and Soils for Quantifying Heavy Metal Concentrations in Sicily: A Multivariate and Spatial Analytical Approach

- DOI: http://dx.doi.org/10.1065/espr2006.01.006 Background The use of vegetal organisms as indicators of contamination of the environment is partially replacing traditional monitoring techniques. Amongst the vegetal organisms available, mosses appear to be good bioindicators and are used for monitoring anthropogenic and natural fall-out on soils. This study has two objectives: the evaluation of the concentrations of heavy metals in soils and mosses of the Sicily Region, in Italy and the identification of the origin of fall-out of heavy metals. Methods Mosses and the surface soil were sampled at 28 sites, only the youngest segments of Hylocomium splendens and Hypnum cupressiforme, corresponding to the plant tissues produced during the last 3 years, were taken. The elements Cd, Cu, Ni, Pb and Zn were analysed by ICP-MS and Hg by AAS. Statistical analysis was by PCA and spatial representation by GIS. Results and Discussion In the mosses sampled in Sicily, the highest concentrations of Cd were found around the cities of Palermo and Messina. The highest concentrations of Hg were recorded in the northern part of the island between Trapani and Messina, similar to the distribution of Cu. Different areas with the highest concentrations of Ni were found near the south coast, in the vicinity of Palermo and around the Volcano Etna. The highest concentrations of Pb were found in the south-west coast near Agrigento, where important chemical plants and petroleum refineries are located. Except for a few locations, Zn fall-out was found to be evenly distributed throughout Sicily. Conclusion The sites where the concentrations of heavy metals cause greatest concern have been revealed by the PCA analysis and portrayed using GIS. Also of some concern is the diffuse and anthropogenic origin of Hg and Cd. The combined approach of using soil and mosses, together with pedological interpretation and application of multivariate statistical techniques has provided valuable insight into the environmental aspects of heavy metal deposition in a region of southern Europe. Recommendations and Outlook Further insight into the deposition of heavy metals will require more detailed sampling of soils and mosses in both new and previous study areas. This needs to be complemented by detailed pedological investigations in the study areas. Future research programmes will address these issues.     

The Ythan Project: A Case Study on Improving Catchment Management through Community Involvement

Increased participation in resource management decisions by a wide range of stakeholders has been widely advocated, and has recently been formally incorporated into the European Water Framework Directive. However, achieving such participation has generally proved to be problematical. In response to locally perceived needs, a project was set up in the Ythan catchment in northeast Scotland, to undertake catchment management actions with increased public involvement. This paper outlines the methods used to increase public participation in such actions, and some preliminary assessments of the effectiveness of these. The experience of the project and the lessons learnt, including some of the difficulties of ensuring fully representative stakeholder involvement, are discussed in relation to published criteria for public participation in resource management.     

Safety Assurance of Foods: Risk Management Depends on Good Science but it is not a Scientific Activity

We make many decisions in our livesand we weigh the benefits against thedrawbacks. Our decisions are based on whatbenefits are most important to us and whatdrawbacks we are willing to accept. Decisionsabout what we eat are made in the same way; butwhen it comes to safety, our decisions areusually made more carefully. Food containsnatural chemicals and it can come into contactwith many natural and artificial substancesduring harvest, production, processing, andpreparation. They include microorganisms,chemicals, either naturally present or producedby cooking, environmental contaminants, andpesticides. Since the chance of being harmed bythese potential hazards is called risk, riskanalysis might be better termed as the scienceof safety, because risk management is anessential part of it. It would, however, bedifficult and shortsighted to maintain thatquestions about risk and safety can have nomoral dimension. Risk and safety become mattersof moral concern when they raise furtherquestions about responsibility, accountability,and justifiability. The question of risk cannotbe ignored in any ethical investigation ofgenetic engineering, novel foods, animalwelfare, and individual choices. However, foodis more than metabolic fuel. It hasphysiological, psychological, social, cultural,and aesthetic associations that merge to form agestalt that people endanger and maintain. Thecontribution of any food towards anindividual's well being is as complex as theindividual himself. In this context, thebenefits of consuming food that containshazards may outweigh the risk.     

Levels of PCDD/Fs and trace elements in superficial soils of Pavia Province (Italy)

Trace elements and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were analyzed in soils from rural and light-industrialized sites (n=168) of Province of Pavia (Northern Italy). Most of the trace element values fit in typical ranges of concentrations in soils and are similar to the ones reported for rural sites in Italy or sites with no direct anthropogenic impact. Total concentrations of 2,3,7,8 chlorine substituted PCDD/Fs in superficial soils ranged between 24.4 and 1287 pg g(-1) dw (0.5-28.9 pg WHO(98)-TEQ g(-1) dw). The North Eastern part of the Province presented significantly higher levels (p<0.001) than the rest of the Province for As, Cd, Hg, Pb, Zn and PCDD/Fs. While the existence of a defined heavy metal polluting source for this specific site has been suggested, in the case of PCDD/Fs, profiles were not linked to any specific emission source fingerprint. In the whole extension of Pavia Province, OCDD/F dominated the 2,3,7,8 chlorine substituted congener soil pattern, followed by the 1,2,3,4,6,7,8 hepta-CDD/F congener. Principal Component Analysis (PCA) showed that this profile could not be associated to any described PCDD/F emission source fingerprint and was relatively similar to the baseline deposition of sites with no direct impact of PCDD/F emission sources independently of land use.