Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Direct synthesis of dimethyl ether(DME) by CO_2 hydrogenation has been investigated over three hybrid catalysts prepared by different methods:co-precipitation,sol-gel,and solid grinding to produce mixed Cu,ZnO,ZrO_2 catalysts that were physically mixed with a commercial ferrierite(FER) zeolite.The catalysts were characterized by N_2 physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),temperature programmed desorption of CO_2(CO_2-TPD),temperature programmed desorption of NH_3(NH_3-TPD),and temperature programmed H2 reduction(H_2-TPR).The results demonstrate that smaller CuO and Cu crystallite sizes resulting in better dispersion of the active phases,higher surface area,and lower reduction temperature are all favorable for catalytic activity.The reaction mechanism has been studied using in situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS).Methanol appears to be formed via the bidentate-formate(b-HCOO) species undergoing stepwise hydrogenation,while DME formation occurs from methanol dehydration and reaction of two surface methoxy groups.     

Characterization of microbial communities from coastal waters using microarrays

Molecular methods, including DNA probes, were used to identify and enumerate pathogenic Vibrio species in the Chesapeake Bay; our data indicated that Vibrio vulnificus exhibits seasonal fluctuations in number. Our work included a characterization of total microbial communities from the Bay; development of microarrays that identify and quantify the diversity of those communities; and observation of temporal changes in those communities. To identify members of the microbial community, we amplified the 16S rDNA gene from community DNA isolated from a biofilm sample collected from the Chesapeake Bay in February, 2000. The resultant 75 sequences were 95% or more similar to 7 species including two recently described Shewanella species, baltica and frigidimarina, that have not been previously isolated from the Chesapeake. When the genera of bacteria from biofilm after culturing are compared to those detected by subcloning amplified 16S fragments from community DNA, the cultured sample exhibited a strong bias. In oysters collected in February, the most common bacteria were previously unknown. Based on our 16S findings, we are developing microarrays to detect these and other microbial species in these estuarine communities. The microarrays will detect each species using four distinct loci, with the multiple loci serving as an internal control. The accuracy of the microarray will be measured using sentinel species such as Aeromonas species, Escherichia coli, and Vibrio vulnificus. Using microarrays, it should be possible to determine the annual fluctuations of bacterial species (culturable and non-culturable, pathogenic and non-pathogenic). The data may be applied to understanding patterns of environmental change; assessing the health of the Bay; and evaluating the risk of human illness associated with exposure to and ingestion of water and shellfish.     

The effect of the introduction of prenatal diagnosis on the reproductive history of women at increased risk from neural tube defects

The reproductive history of 45 couples at increased risk for neural tube defect (NTD) who came for genetic counselling in 1970 and 1971 were compared with a similar number counselled in 1975 and 1976, when prenatal diagnostic tests were freely offered. They were subsequently interviewed in their homes and had their reproductive history recorded to the end of 1973 and 1978 respectively. Nearly all had a previous child with an NTD and none of the women were pregnant at the time of counselling. The effect of prenatal diagnosis was to speed somewhat the decision about further pregnancies, but the number of couples deciding on no further children and on having further pregnancies were almost identical in the two groups. The average number of pregnancies was 2·8 per family, with only 1·2 surviving children. The pregnancy outcomes are discussed as are the reasons for not attempting further pregnancies in both groups, which included very high risk of recurrence, a surviving spina bifida child, inability to accept the tests or its implications. Ninety per cent of the second group had tests. Their reactions to the tests were favourable but all complained of the waiting time between amniocentesis and obtaining the results. They all would have tests again in any future pregnancy. The reason for women not having prenatal diagnostic tests included inability to accept termination. It is concluded that couples in South Wales decide either to have no more children or to have further pregnancies regardless of tests. but tests speed a decision and enable the women to enjoy the pregnancy after obtaining the results, and that an NTD greatly reduces the number of children per family. A termination for an NTD is much more acceptable to most than an NTD at term. The reasons for this are discussed.     

Flow rate and particle concentration within the house of the pelagic tunicate Oikopleura vanhoeffeni

The food-concentrating filter within the house of Oikopleura vanhoeffeni Lohmann consists of three layers, upper and lower fine-mesh layers and an intermediate coarse-mesh layer. The filter is a natural analogue of man-made tangential, or cross-flow, filters that are used to concentrate fine particulate and colloidal material by the exclusion of water. Flow analysis using video microscopy of O. vanhoeffeni, collected in 1989 and 1990 at Logy Bay, insular Newfoundland, indicates concentration of particles of 74 to 1089 times that of ambient seawater ( ,n=23), for individuals 1.8 to 5.4 mm long. The smallest individuals had the highest concentration factors. Flow through the house is predominately affected by viscous forces and values of Reynolds numbers are 1. Flow rates through the house of O. vanhoeffeni indicate a maximum filtration capacity of ca. 1.4 to 26 liters d^-1 and clearance rates (assuming ca. 50% of the time is spent not actively pumping) of 0.7 to 13 liters d^-1, depending on body size. The estimated thickness of the boundary layer around individual fibers of the food-concentrating filter is 0.08 m, which is less than the pore width. The estimated concentration factors suggest that colloidal and fine particulate material may aggregate into larger particles within the food-concentrating filter and food tube during feeding.     

Emerging technologies for in-situ groundwater remediation

There are numerous technologies currently being tested by EPA, universities throughout the world, and private research organizations. A few of the more promising innovative technologies as well as fully tested and proven remedies for treating contaminated groundwater are presented in this article. Although several of those technologies have been in existence for only four to five years, the results of full-scale testing are being produced. The method for each of these promising technologies is described, results from recent field-scale studies are summarized, and a discussion of cost is presented.     

Future energy: in search of a scenario reflecting current and future pressures and trends

Environmental Economics and Policy Studies - Growing societal pressures, technological trends and government and industry actions are moving the world toward decarbonization and away from the...     

In situ chemical oxidation: Lessons learned at multiple sites

This paper compiles a detailed set of in situ chemical oxidation (ISCO) lessons learned pertaining to design, execution, and safety based on global experiences over the last 20 years. While the benefits of a “correct” application are known (e.g., cost effectiveness, speed, permanence of treatment), history also provides examples of a variety of “incorrect” applications. These provide an opportunity to highlight recurring themes that resulted in failures. ISCO is, and will continue to provide, an important remedial tool for site remediation, particularly as a component of a multifaceted approach for addressing large and complex sites. Future success, however, requires an objective understanding of both the benefits and the limitations of the technology. The ability to learn from the mistakes of the past provides an opportunity to eliminate, or at least minimize, them in the future. Over the last 25 years of ISCO application, process understanding and knowledge have improved and evolved. This paper combines a thorough discussion of lessons learned through decades of ISCO implementation throughout all aspects of ISCO projects with an analysis of changes to the ISCO remediation market. By discussing the interplay of these two themes and providing recommendations from collective lessons learned, we hope to improve the future of safe, cost‐effective, and successful applications of ISCO.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

Needed: A National R&D Effort To Develop Individual Air Pollution Monitor Instrumentation

The results from the regional air quality analysis for the Four Corners Study are discussed in this paper. This study was one of five regional studies conducted for the National Commission on Air Quality. Potential regional air quality impacts were evaluated through the year 1995 for alternative energy scenarios under current and alternative regulatory policies. The alternative regulatory policies include emission fees, technology standards, emission ceilings, and prevention of significant deterioration class elimination. The alternatives were compared in terms of their impacts on regional visibility and on the ambient concentrations of SO₂, SO₄, and primary fine particulates. The fate of the pollutants was estimated. The alternative regulatory policies were quite different with respect to their control of SO_X emissions and their impacts on regional visibility. Sources located outside of the study region were estimated to have a major impact on regional air quality within the study region.