Pressurized liquid extraction of six tetracyclines from agricultural soils

Veterinary antibiotics used in agriculture can be introduced into the environment through land application of animal manure, accumulating in soils and groundwaters and posing a significant risk to human health and animal well-being. As the analysis of tetracyclines in soil is challenging due to their strong interaction with soil minerals and organic carbon, the objective of this study was to develop a reliable and reproducible method for quantitative analysis of chlortetracycline and oxytetracycline, and their respective metabolites in soils. A method based on pressurized liquid extraction (PLE) with in-cell clean-up was developed for the extraction of chlortetracycline and oxytetracycline and four likely metabolites from a set of four soils. Optimized conditions included a cell size of 22?mL, soil loading of 5?g, pH of 8.0, methanol:water ratio of 3:1, 50?°C, and two cycles. Soil extracts were analysed by high-performance liquid chromatography (HPLC) coupled with ion trap mass spectrometry (MS). Recoveries of seven tetracyclines from soil ranged from 41% to 110%. The limits of detection for tetracyclines were 0.08–0.3 µg g^?1 soil, and intra- and inter-day variation ranged from 0.12–0.34%. The proposed PLE method is suitable for quantification of tetracyclines in agricultural soils at typical concentrations expected in contaminated environments.     

In situ chemical oxidation: Lessons learned at multiple sites

This paper compiles a detailed set of in situ chemical oxidation (ISCO) lessons learned pertaining to design, execution, and safety based on global experiences over the last 20 years. While the benefits of a “correct” application are known (e.g., cost effectiveness, speed, permanence of treatment), history also provides examples of a variety of “incorrect” applications. These provide an opportunity to highlight recurring themes that resulted in failures. ISCO is, and will continue to provide, an important remedial tool for site remediation, particularly as a component of a multifaceted approach for addressing large and complex sites. Future success, however, requires an objective understanding of both the benefits and the limitations of the technology. The ability to learn from the mistakes of the past provides an opportunity to eliminate, or at least minimize, them in the future. Over the last 25 years of ISCO application, process understanding and knowledge have improved and evolved. This paper combines a thorough discussion of lessons learned through decades of ISCO implementation throughout all aspects of ISCO projects with an analysis of changes to the ISCO remediation market. By discussing the interplay of these two themes and providing recommendations from collective lessons learned, we hope to improve the future of safe, cost‐effective, and successful applications of ISCO.     

Chemiluminescence in evaluating thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. III. Emulsion-grade products

The thermal oxidative stability of various formulations based on emulsion-grade ABS was studied by the chemiluminescence technique. Emulsion products were found to be essentially less stable than ionic mass polymerization resins. Among the antioxidants studied, Santonox R is clearly more efficient than Irganox 1076 and Irganox 3114, and its superiority is reflected primarily in improved induction period values. The introduction of Tinuvin 770 and Tinuvin 328 UV stabilizers into emulsion resins does not change the durability of the products. In mixtures where both Irganox 1076 and UV stabilizers are present, a certain antagonistic effect was noted at high UV stabilizer concentrations.     

Development of a purpose built landfill system for the control of methane emissions from municipal solid waste

In the present paper, a new system of purpose built landfill (PBLF) has been proposed for the control of methane emissions from municipal solid waste (MSW), by considering all favourable conditions for improved methane generation in tropical climates. Based on certain theoretical considerations multivariate functional models (MFMs) are developed to estimate methane mitigation and energy generating potential of the proposed system. Comparison was made between the existing waste management system and proposed PBLF system. It has been found that the proposed methodology not only controlled methane emissions to the atmosphere but also could yield considerable energy in terms of landfill gas (LFG). Economic feasibility of the proposed system has been tested by comparing unit cost of waste disposal in conventional as well as PBLF systems. In a case study of MSW management in Mumbai (INDIA), it was found that the unit cost of waste disposal with PBLF system is seven times lesser than that of the conventional waste management system. The proposed system showed promising energy generation potential with production of methane worth of Rs. 244 millions/y ($5.2 million/y). Thus, the new waste management methodology could give an adaptable solution for the conflict between development, environmental degradation and natural resources depletion.     

Evaluation of deep learning and transform domain feature extraction techniques for land cover classification: balancing through augmentation

Environmental Science and Pollution Research - The identification of features that can improve classification accuracy is a major concern in land cover classification research. This paper compares...     

Phenylurea herbicide sorption to biochars and agricultural soil

Biochar is increasingly been used as a soil amendment to improve water-holding capacity, reduce nutrient leaching, increase soil pH, and also as a means to reduce contamination through sorption of heavy metals or organic pollutants. The sorption behavior of three phenylurea herbicides (monuron, diuron and linuron) on five biochars (Enhanced Biochar, Hog Waste, Turkey Litter, Walnut Shell and Wood Feedstock) and an agricultural soil (Yolo silt loam) was investigated using a batch equilibration method. Sorption isotherms of herbicides to biochars were well described by the Freundlich model (R² = 0.93–0.97). The adsorption K_F values ranged from 6.94 to 1306.95 mg kg^?1 and indicated the sorption of herbicides in the biochars and Yolo soil was in the sequence of linuron > diuron > monuron and walnut shell biochar > wood feedstock biochar > turkey litter biochar > enhanced biochar > hog waste biochar > Yolo soil. These data show that sorption of herbicides to biochar can have both positive (reduced off-site transport) and negative (reduced herbicide efficacy) implications and specific biochar properties, such as H/C ratio and surface area, should be considered together with soil type, agriculture chemical and climate condition in biochar application to agricultural soil to optimize the system for both agricultural and environmental benefits.     

Risk-based route evaluation against country-specific criteria of risk tolerability for hazmat transportation through Indian State Highways

Risk-based route evaluation is necessary for decision making by authorities for regulating hazardous materials (hazmats) transport vehicles. The paper highlights risk estimation and its representation for three highway study routes in western India using frequency analysis through logic diagrams and scenario based detailed consequence analysis of accidental releases considering 26 hazmats from UN Classes-2, 3, 6 and 8 categories. The 3 routes have been evaluated based on several layers of analysis namely hazmat-wise, route-segment-wise, route-wise and overall assessment including presentation of normalized risk figures. The results show that compared to the risk on city route segment, individual risks on other two routes are higher and extend beyond ALARP (As Low As Reasonably Practicable) region when assessed against HSE, UK risk criteria, whereas, societal risks on all three routes are within the ALARP except some part in the higher fatality area. But, considering the general mortality rates in India and sustained economic growth, the authors proposed widening of the ALARP region for individual risk tolerability of transportation activity of essential commodities that benefits society to a large extent in this developing economy. However, specific risk reduction measures have also been suggested to improve upon the risk picture in the study area.     

Chemiluminescence in evaluating the thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. 1. Influence of stabilizers and lubricants

The influence of lubricants, UV stabilizers, antioxidants, and metal deactivators on the resistance of ABS to thermal oxidation was studied by means of the chemiluminescence technique. Neither of the additives seems to affect significantly the induction period of oxidation. At the same time, the influence of various additives on the oxidation rate constant is remarkably different: the introduction of lubricants and UV stabilizers increases its value, while antioxidants and metal deactivators have the opposite effect. For the particular systems studied durability is decreased in samples containing the lubricant and UV stabilizers and increased in samples stabilized with the antioxidant and metal deactivator.     

Chemiluminescence in evaluating the thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. II. ABS/polycarbonate (PC) blends

The thermal oxidative stability of various ABS/PC compounds was studied by means of the chemiluminescence technique. Similarly to pure ABS, Irganox 1076 and Irganox MD 1024 perform as moderate antioxidants in ABS/PC and (ABS/PC + lubricant) blends. Neither Tinuvin 144, Irgaphos 168, nor their mixture affects the durability of the ABS/PC blend. At the same time, (Irgaphos 168 + Tinuvin 144) in combination with Irganoxes was found to provide a noticeable enhancement in durability to the (ABS/PC + lubricant) system. Titanium dioxide pigments by themselves have only a slight influence on the oxidative stability of the ABS/PC blend. Durability of the (ABS/PC + pigment) and (ABS/PC + lubricant) systems was found to be the same and the overall protective effect of Irganox 1076 was similar in both the (ABS/PC + lubricant) and the (ABS/PC + lubricant + pigment) systems. Certain modifiers significantly improve the durability of the ABS/PC compounds, although their function may differ in the systems with and without pigments.Guest Editor: Dr. Graham Swift, Rohm & Haas.     

Chemiluminescence in evaluating thermal oxidative stability of acrylonitrile-butadiene-styrene (ABS) copolymers. IV. Comparative study of various stabilizers in mass polymerization and emulsion resins

The thermal oxidative stability of ionic and emulsion ABS with various antioxidants and UV stabilizers was studied. It was found that Santonox R provides better protection than Irganox 1076 to both resins. It is also the case in formulations with Tinuvin 770 and Tinuvin 328.