Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

Degradation of Phenolic Resin by Tremetes versicolor

A phenolic resin that is used as syntan in leather manufacturing was degraded using Tremetes versicolor. On degradation of this resin for eight days, the reduction in biochemical oxygen demand (BOD), chemical oxygen demand (COD) and total organic carbon (TOC) were 65.11, 76.66 and 72.94% respectively. It was found from the infra red (IR) spectra of the samples that up to seven days the aromaticity was not perturbed however there were reductions in BOD and COD. Addition of co-substrate starch, brought about reduction in BOD, COD and TOC by 85.36, 91.93 and 89.98% respectively. After eight days, there observed a disturbance in the aromatic ring. The enzyme was extracted and assayed for polyphenol oxidase and laccase. Polyphenol oxidase activity and laccase activity of the crude enzyme were found to be 31.4 and 1.67 U/mL. On ammonium sulfate precipitation and dialysis, the polyphenol oxidase activity and laccase activity were enhanced by 1.5- and 3.2-folds respectively.     

Fresh water fishes as indicators of Kaveri River pollution

The survey of fish fauna in Kaveri River at polluted and unpolluted sites revealed a direct effect on the distribution of fishes in that 14 species were observed in unpolluted site and only 6 species in polluted site. Further, the haemotological parameters like RBC, WBC and haemoglobin content increased in fishes collected from polluted site whereas the organic constituents of muscle decreased in the above fishes when compared to the fishes of unpolluted site. The reason for the above changes is discussed.     

A comparative study of prognostic MM5 meteorological modeling with aircraft, wind profiler, lidar, tethered balloon and RASS data over Philadelphia during a 1999 summer episode

This study presents a comparative evaluation of the prognostic meteorological Fifth Generation NCAR Pennsylvania State University Mesoscale Model (MM5) using data from the Northeast Oxidant and Particle Study (NE-OPS) research program collected over Philadelphia, PA during a summer episode in 1999. A set of model simulations utilizing a nested grid of 36 km, 12 km and 4 km horizontal resolutions with 21 layers in the vertical direction was performed for a period of 101 h from July 15, 1999; 12 UTC to July 19, 1999; 17 UTC. The model predictions obtained with 4 km horizontal grid resolution were compared with the NE-OPS observations. Comparisons of model temperature with aircraft data revealed that the model exhibited slight underestimation as noted by previous investigators. Comparisons of model temperature with aircraft and tethered balloon data indicate that the mean absolute error varied up to 1.5 °C. The comparisons of model relative humidity with aircraft and tethered balloon indicate that the mean relative error varied from –11% to –22% for the tethered balloon and from –5% to –30% for the aircraft data. The mean relative error for water vapor mixing ratio with respect to the lidar data exhibited a negative bias consistent with the humidity bias corresponding to aircraft and tethered balloon data. The tendency of MM5 to produce estimates of very low wind speeds, especially in the early-mid afternoon hours, as noted by earlier investigators, is seen in this study also. It is indeed true that the initial fields as well as the fields utilized in the data assimilation also contribute to some of the differences between the model and observations. Studies such as these which compare the grid averaged mean state variables with observations have inherent difficulties. Despite the above limitations, the results of the present study broadly conform to the general traits of MM5 as noted by earlier investigators.     

A Large-Eddy Simulation Study of the Convective Boundary Layer over Philadelphia during the 1999 Summer NE-OPS Campaign

This study presents a large-eddy simulation (LES) study of the convective boundary layer on August 1, 1999 over Philadelphia, PA during a summer ozone episode. The study is an evaluation of the Colorado State University's Regional Atmospheric Modeling System Version 4.3 (RAMS4.3) with the LES option using Northeast Oxidant and Particulate Study (NE-OPS) data. Simulations were performed with different imposed sensible heat fluxes at the ground surface. The model was initialized with the atmospheric sounding data collected at Philadelphia at 1230 UTC and model integrations continued till 2130 UTC. The resulting mean profiles of temperature and humidity obtained from the LES model were compared with atmospheric soundings, tethered balloon and aircraft data collected during the NE-OPS 1999 field campaign. Also the model-derived vertical profiles of virtual temperature were compared with NE-OPS Radio Acoustic Sounder System (RASS) data while the humidity profiles were compared with NE-OPS lidar data. The comparison of the radiosonde data with the LES model predictions suggests that the growth of the mixing layer is reasonably well simulated by the model. Overall, the agreement of temperature predictions of the LES model with the radiosonde observations is good. The model appears to underestimate humidity values for the case of higher imposed sensible heat flux. However, the humidity values in the mixing layer agree quite well with radiosonde observations for the case of lower imposed sensible heat flux. The model-predicted temperature and humidity profiles are in reasonable agreement with the tethered balloon data except for some small overestimation of temperature at lower layers and some underestimation of humidity values. However, the humidity profiles as simulated by the model agree quite well with the tethered balloon data for the case of lower imposed sensible heat flux. The model-predicted virtual temperature profile is also in better agreement with RASS data for the case of lower imposed sensible heat flux. The model-predicted temperature profile further agrees quite well with aircraft data for the case of lower imposed heat flux. However, the relative humidity values predicted by the model are lower compared with the aircraft data. The model-predicted humidity profiles are only in partial agreement with the lidar data. The results of this study suggest that the explicitly resolved energetic eddies seem to provide the correct forcing necessary to produce good agreement with observations for the case of an imposed sensible heat flux of 0.1 K m s^–1 at the surface.     

Seawater intrusion vulnerability in the coastal aquifers of southern India—an appraisal of the GALDIT model,parameters’ sensitivity,and hydrochemical indicators

An appraisal of seawater intrusion into the coastal aquifers is one of the major issues for groundwater resource management. The GALDIT model applies to the analysis of multiple parameters using systematic GIS techniques for mapping and assessment of seawater intrusion vulnerability. It demarcates the mapping of potential vulnerability that shows a higher vulnerability to seawater intrusion in various parts of the coast and the estimated vulnerability index value of 7.50 and 9.64. An area of 33.0 km² spread in the low-lying coastal area comprising estuaries, salt marshes, and saltpans shows the high vulnerability condition with an estimated vulnerability value of 6.42–7.50. An area of 73.20 km² spread over coastal and alluvial plains experiences moderate vulnerability (temporal salinity in the groundwater sources) with an estimated vulnerability index value of 5.46–6.42. Aquifers underlying coastal uplands (hard rock formations) and some parts of accretionary beaches (2.05 km²) are relatively protected fresh groundwater sources, wherein the estimated vulnerability index is 4.55–5.46. The vulnerability mapping of the GALDIT model using hydrochemical analysis of primary groundwater parameters such as TDS, Cl^?, HCO₃, and Cl^?/HCO₃ ratio is validated. Higher concentration of TDS (2637–4162 mg/l) and Cl^? (1268–2347 mg/l) is taken for the areas falling under higher vulnerability to seawater intrusion, especially in the placer mining sites and coastal areas facing erosion. Similarly, the groundwater sources of the low-lying areas including estuaries, salt marshes, saltpans, and backwater were noted to have higher values of Cl^?/HCO₃ with a rationality of 9.87–12.18. Hydrological facies shows the highest concentration of NaCl in the groundwater sources within the proximity of eroded beaches, saltwater bodies, and sand mining areas. A hydrochemical facies evolution (HFE) diagram represents the hydrochemical facies of groundwater elements that shows an intrusion of seawater into the coastal aquifers underlying the very high vulnerable zones. Higher bicarbonate concentration (233–318 mg/l) is noticed in the upland areas and some parts of dunes and accreted beaches, sandy coasts, and uplands. Vulnerability analysis reveals that those areas near saltwater bodies and eroding coasts are prone to lateral and vertical diffusion of saltwater. The geodatabase developed through such modeling studies can help in planning and developing activities for sustainable groundwater resource management in coastal areas.

     

Hydrogeochemical study of shallow carbonate aquifers, Rameswaram Island, India

Groundwater quality assessment has been carried out based on physicochemical parameters (pH, EC, TDS, CO(3), HCO(3), Cl, SO(4), PO(4), NO(2), Ca(+2), Mg(+2), Na(+) and K(+)) and metal concentration in the Rameswaram Island from 25 bore wells. The Langelier Saturation Index of the groundwater shows positive values (63% samples) with a tendency to deposit the CaCO(3) in the majority of water samples. Scatter plot (Ca + Mg/HCO(3)) suggests carbonate weathering process, which is the main contributor of Ca(2+), Mg(2+) and HCO(3) ions to the water. Gibbs diagram suggests rock-water interaction dominance and evaporation dominance which are responsible for the change in the quality of water in the study area. NaCl and mixed CaNaHCO(3) facies are two main hydrogeochemical facies of groundwater. Mathematical calculations and graphical plots of geochemical data reveal that the groundwater of Rameswaram Island is influenced by natural weathering of rocks, anthropogenic activities and seawater intrusion due to over exploitation. Weathering and dissolution of carbonate and gypsum minerals also control the concentration of major ions (Ca(+2), Mg(+2), Na(+) and K(+)) in the groundwater. The nutrient concentration of groundwater is controlled to a large extent by the fertilizers used in agricultural lands and aquaforms. Comparison of geochemical data shows that majority of the groundwater samples are suitable for drinking water and irrigation purposes.     

Mechanical,Morphological and Dynamic Mechanical Analysis of Pineapple Leaf/Washingtonia Trunk Fibres Based Biophenolic Hybrid Composites

In this article, flexural, impact and dynamic mechanical properties of the Pineapple leaf fibres (PALF) and Washingtonia trunk fibres (GW) based bio-phenolic hybrid composites were examined. The pure and hybrid composites were fabricated using the hand lay-up technique with an overall fibre weight ratio of 50% in which GW and PALF were maintained in the fibre weight ratios of 50:50, 30:70, and 70:30 denoted as 1G1P, 3G7P, and 7G3P, respectively. Hybrid composites displayed better flexural strength, flexural modulus and impact strength than the GW composites and better viscoelastic properties than the PALF composites. Results revealed that 1G1P hybrid composites exhibited 25% and 12% improvements in flexural strength and modulus compared to the GW composites. 3P7K composites showed a twofold increase in impact strength than GW composites. The storage modulus of the pure and hybrid composites declined rapidly beyond the glass transition temperature. Furthermore, it was observed that the values of storage modulus for all the composites at 150 °C were similar regardless of the composite configuration. The Peak of loss modulus was found to increase in the following order: GW?>?7G3P?>?3G7P?>?1G1P?>?PALF. Furthermore, the temperature at the peak tan delta was improved, and a reduction in the tan delta peak was observed for hybrid composites compared to the pure composites. Finally, the PALF and GW hybrid combinations can be suitable for use in various applications such as textiles, machinery part production industries, medicine, automobiles, etc.

     

Tensile,Thermal and Physical Properties of Washightonia Trunk Fibres/Pineapple Fibre Biophenolic Hybrid Composites

Journal of Polymers and the Environment - In this work, hybrid composites reinforced with Washightonia trunk fibres (GW)/Pineapple fibre (PALF) in bio-phenolic matrix were fabricated with...