Impact of posture and upper-limb muscle activity on grip strength

Purpose. The current research was carried out to determine grip strength (GS) with change in posture and upper-limb muscle activity of manual workers and investigate the impacts of these changes. Methods. For the current research, 120 male and 80 female participants were selected and GS was assessed using a digital hand grip dynamometer in various conditions. Results. The outcomes showed that male participants had higher GS as compared to female participants. Maximum GS was found in a standing posture with the fixed forward shoulder at 45°, elbow at 90° and a neutral position of the wrist and forearm for all participants. Conclusions. Higher values of GS were attained in standing postures which may result in attainment of higher performance levels by the workers. The outcomes justify the importance of correct postures during manual work in industries employing traditional methods.     

Spatially distributed modeling of the long-term carbon balance of a boreal landscape

Spatially and temporally distributed information on the sizes of biomass carbon (C) pools (BCPs) and soil C pools (SCPs) is vital for improving our understanding of biosphere-atmosphere C fluxes. Because the sizes of C pools result from the integrated effects of primary production, age-effects, changes in climate, atmospheric CO₂ concentration, N deposition, and disturbances, a modeling scheme that interactively considers these processes is important. We used the InTEC model, driven by various spatio-temporal datasets to simulate the long-term C-balance in a boreal landscape in eastern Canada. Our results suggested that in this boreal landscape, mature coniferous stands had stabilized their productivity and fluctuated as a weak C-sink or C-source depending on the interannual variations in hydrometeorological factors. Disturbed deciduous stands were larger C-sinks (NEP₂₀₀₄ = 150 gC m⁻² yr⁻¹) than undisturbed coniferous stands (e.g. NEP₂₀₀₄ = 8 gC m⁻² yr⁻¹). Wetlands had lower NPP but showed temporally consistent C accumulation patterns. The simulated spatio-temporal patterns of BCPs and SCPs were unique and reflected the integrated effects of climate, plant growth and atmospheric chemistry besides the inherent properties of the C pool themselves. The simulated BCPs and SCPs generally compared well with the biometric estimates (BCPs: r = 0.86, SCPs: r = 0.84). The largest BCP biases were found in recently disturbed stands and the largest SCP biases were seen in locations where moss necro-masses were abundant. Reconstructing C pools and C fluxes in the ecosystem in such a spatio-temporal manner could help reduce the uncertainties in our understanding of terrestrial C-cycle.     

Non-powered hand tool improvement research for prevention of work-related problems: a review

Purpose. In lower-middle-income countries, most of the work is performed manually using non-ergonomic hand tools which results in work-related health problems. Using hand tools designed in line with ergonomic principles may play an important role in reducing work-related health concerns significantly. Methods. Scientific databases (PubMed, EBSCOhost) and e-publishers were searched for articles from 1985 to 2015 using the following keywords: ‘hand tool’, ‘ergonomics’, ‘usability’ and ‘design’. After applying selection criteria to 614 articles, 58 articles related to the physical design of hand tools were selected. Results. Seventeen articles were related to hand tool improvement in the manufacturing sector. Musculoskeletal disorders were found to be the most frequently occurring work-related health problems. Most of the articles focused on product and qualitative variables for improvement in hand tools, while few articles considered human and task variables. Conclusions. Literature shows that hand tool improvement studies have been given less importance in low-income and lower-middle-income countries. However, some work of significance is reported in the agriculture sectors of these countries. Hence, it is concluded that ergonomic intervention in hand tools is much needed for those industries which employ traditional methods of working.     

Pulling force prediction using neural networks

Purpose. In ergonomics and human factors investigations, pulling force (PF) estimation has usually been achieved using various types of biomechanical models, and independent approximation of PF was done with the help of upper extremity joints. Recently, multiple regression methods have gained importance for task-relevant inputs in predicting PF. Artificial neural networks (ANNs) also play a vital role in fitting the data; however, their use in work-related biomechanics and ergonomics is inadequate. Therefore, the current research aimed to accomplish comparative investigation of ANN and regression models by assessing their capacity to predict PF values. Methods. Multipositional PF data were acquired from 200 subjects at three different handle heights and body locations. ANN and regression models were formed using a random sample of three subsets (75% training, 15% selection, 10% validation) for proving the outcomes. Results. The comparison of ANN and regression models shows that the predictions of ANN models had a profoundly explained variance and lower root mean square difference values for the PF data at three handle heights. Conclusions. These outcomes advise that ANNs offer a precise and robust substitute for regression methods, and should be considered a useful method in biomechanics and ergonomics task assessments.     

Study of the biouptake of labeled single-walled carbon nanotubes using fluorescence-based method

Single-wall carbon nanotubes (CNT) are one of the most attractive engineered nanomaterials due to their unique electrical, mechanical and thermal properties, and potential use in a variety of commercial products. Due to their small size, CNT could become easily airborne and reach the various environmental compartments and eventually the food chain and humans. However, the environmental fate processes and health impacts of CNT are not clear. This study investigated a method for the quantitative measurement of carbon nanotube (CNT) in natural media such soil and benthic organism tissues. Fluorescence dye Nile blue was used for noncovalent labeling of CNT to enable their fluorescence detection. Labeled nanotubes were successfully detected in soil samples as well as in worm tissue. We were also able to detect the presence of labeled carbon nanotubes in worms exposed for 1 week to CNT-laden soil, which indicates CNT may transfer through environmental food web. The method allows for laboratory measurements of CNT mass transfer and partitioning into various environmental systems.     

An update on pathophysiology and treatment of sports-mediated brain injury

Environmental Science and Pollution Research - Traumatic brain injury (TBI) is a neurological disorder which represents a major health issue worldwide. It causes mortality and disability among all...     

Removal of cyanotoxins from surface water resources using reusable molecularly imprinted polymer adsorbents

Introduction

Microcystins (MCs; cyclic heptapeptides) are produced by freshwater cyanobacteria and cause public health concern in potable water supplies. There are more than 60 types of MCs identified to date, of which MC-LR is the most common found worldwide. For MC-LR, the WHO has established a threshold value of 1???g?L^?1 for drinking water. The present MCs removal methods such as coagulation, flocculation, adsorption, and filtration showed low efficiency for removing dissolved MC fraction from surface waters to the stipulated limit prescribed by WHO based on MC health impacts. The search for cost-effective and efficient removal method is still warranted for remediation of dissolved MC-LR-contaminated water resources.

Materials and methods

Molecularly imprinted polymer (MIP) adsorbent has been prepared using non-covalent imprinting approach. Using MC-LR as a template, itaconic acid as a functional monomer, and ethylene glycol dimethacrylate as a cross-linking monomer, a MIP has been synthesized. Computer simulations were used to design effective binding sites for MC-LR binding in aqueous solutions. Batch binding adsorption assay was followed to determine binding capacity of MIP under the influence of environmental parameters such as total dissolved solids and pH.

Results and discussion

The adsorptive removal of MC-LR from lake water has been investigated using MIPs. The MIP showed excellent adsorption potential toward MC-LR in aqueous solutions with a binding capacity of 3.64???g?mg^?1 which is about 60% and 70% more than the commercially used powdered activated carbon (PAC) and resin XAD, respectively. Environmental parameters such as total organic carbon (represented as chemical oxygen demand (COD)) and total dissolved solids (TDS) showed no significant interference up to 300?mg?L^?1 for MC-LR removal from lake water samples. It was found that the binding sites on PAC and XAD have more affinity toward COD and TDS than the MC-LR. Further, the adsorption capacity of the MIP was evaluated rigorously by its repeated contact with fresh lake water, and it was found that the adsorption capacity of the MIP did not change even after seven adsorption/desorption cycles. The contaminated water of MC-LR (1.0???g?L^?1) of 3,640?L could be treated by 1?g of MIP with an estimated cost of US $1.5.

Conclusions

The adsorption capacity of the MIP is 40% more than commercially used PAC and resins and also the polymer showed reusable potential which is one of the important criteria in selection of cyanotoxins remediation methods.     

Fuelwood consumption in two tribal villages of the Nanda Devi Biosphere Reserve of the Indian Himalaya and strategies for fuelwood sustainability

Fuelwood is the only important source of energy in the mountainous region of the Garhwal Himalaya, India. Since the commercial source of energy is generally beyond the reach of ordinary people due to their poor socio-economic conditions and due to limited supply and lack of communication facilities for transport of LPG, the villages of the inner region of the Garhwal Himalaya depend on their fuel requirement from the forest. In the present study, two villages of the Nanda Devi Biosphere Reserve in Uttarakhand part of the Indian Himalaya i.e. Lata and Dunagiri located at 2,415 and 3,600 m altitudes, respectively, were selected for the study of socio-economic profile and vegetation and for estimation of per capita fuelwood consumption and the degree of disturbance. The study was conducted from 2002–2005. The population of these villages is migratory and belongs to the Bhotiya community, a scheduled tribe consisting of two subgroups known as Tolcha and Marchha. They grow traditional crops as well as cash crops. Important tree species used for fuelwood include Cedrus deodara, Pinus wallichiana, Cupressus torulosa, Taxus wallichiana, Acer indicum, Quercus dilatata and Viburnum cotinifolium. Maximum density among trees was shown by Pinus wallichiana (169.6 trees ha⁻¹) in village Lata and by Cedrus deodara (89.6 trees ha⁻¹) in village Dunagiri. The average per capita consumption of fuelwood in villages Lata and Dunagiri was 4.03 and 4.77 kg capita⁻¹ day⁻¹. Maximum number of trees (29 and 31% lopping for Lata and Dunagiri, respectively) belonged to disturbance class 1 (1–20% lopping) followed by the disturbance class 2 (20–40% lopping). Due to location of these villages in the buffer zone of the biosphere reserve, the fuelwood consumption may cause an adverse impact on the ecological status of this reserve, which urgently requires employing strategies for the conservation and management of this biosphere in terms of fuelwood sustainability e.g. regulation of livestock stock and grazing, using alternative sources of fuels, plantation of multipurpose trees and adoption of ecotourism.     

Use of gold mill tailings in making bricks: a feasibility study.

Mill tailings dumps at Kolar Gold Fields, Karnataka, are creating environmental problems. One of the solutions to these problems is to use the mill tailings for some useful purpose. This study examined the possibility of making bricks from the mill tailings with some additives in laboratory experiments. Samples of the mill tailings and the additives were analysed for particle size distribution, Atterberg limits and specific gravity. The plasticity index of the mill tailings being zero, they could not be used directly for making bricks. Therefore some additives that had plasticity or binding properties were mixed with the mill tailings. Ordinary Portland cement, black cotton soils and red soils were selected as additives. Each of the additives was mixed separately with the mill tailings in different proportions by weight and a large number of bricks were prepared using metallic moulds. The bricks were termed as cement-tailings bricks or soil-tailings bricks, depending on the additives used. The cement-tailings bricks were cured for different periods and their corresponding compressive strengths were determined. The bricks with 20% of cement and 14 days of curing were found to be suitable. The soil-tailings bricks were sun-dried and then fired in a furnace at different temperatures. The quality of bricks was assessed in terms of linear shrinkage, water absorption and compressive strength. The cost analysis revealed that cement-tailings bricks would be uneconomical whereas the soil-tailings bricks would be very economical.