由粉煤灰合成单一的沸石及其对Cr(Ⅵ)的吸附研究

以粉煤厌为原料采用两步法合成了2种单一沸石矿物种的NaA和NaX型沸石,并对产物的结构和性能进行了详细表征.2种沸石产物的吸附性能比较结果表明,NaA型沸石优于NaX型沸石.在静态吸附条件下,研究了NaA型沸石吸附水溶液中Cr(Ⅵ)的相关参数(溶液pH值、吸附温度和吸附时间),并用Langmuir和Freundlich等温吸附线对吸附结果进行拟和.结果表明:Cr(Ⅵ)的吸附行为符合Langmuir方程;饱和吸附量为47.78 mg/g.NaA型沸石对Cr(Ⅵ)的吸附是物理和化学吸附两种行为共同作用的结果.     

Will polycentric cities cause more CO2 emissions? A case study of 232 Chinese cities

From 2000 to 2010 China experienced rapid economic development and urbanization. Many cities in economically developed areas have developed from a single-center status to polycentricity. In this study, we used exploratory spatial data analysis (ESDA) to identify the population centers, which identified 232 cities in China as having urban centers. COMP was used to represent urban agglomeration, and POLYD (representing how far is the city's sub-centers to the main center), POLYC (representing the number of a city's centers), and POLYP (representing the population distributed between the main center and the sub-centers) were used to indicate urban polycentricity. Night light data were used to determine the CO₂ emissions from various cities in China. A mixed model was used to study the impact of urban aggregation and polycentric data on the CO₂ emission efficiency in 2000 and 2010. The study found that cities with higher compactness were distributed in coastal areas, and the cities with higher multicentricity were distributed in the Yangtze River Delta and Shandong Province. The more compact the city was, the less conducive it was to improving CO₂ emission efficiency. Polycentric development of the city was conducive to improving the CO₂ emission efficiency, but the number of urban centers had no significant relationship with the CO₂ emission efficiency. Our research showed that the compactness and multicentricity of the city had an impact on the CO₂ emission efficiency and provided some planning suggestions for the low carbon development of the city.     

可发性聚苯乙烯废水处理工程的设计与运行

介绍了采用中和混凝 水解酸化 生物接触氧化 化学除磷工艺对可发性聚苯乙烯 (EPS)废水的处理工艺。在废水中的CODCr、TP、SS、NH3 N分别为 194 0mg L、112mg L、5 92mg L、2 3 6mg L的条件下 ,废水经过处理后 ,出水CODCr、TP、SS、NH3 N分别为 70mg L、0 38mg L、2 6mg L、0 32mg L ,均可达到《污水综合排放标准》中的一级标准 ,废水中CODCr、TP、SS、NH3 N的平均去除率分别为 96 4 %、99 3%、95 6 %、98 6 %。     

上海市实施ISO14001环境管理体系标准的回顾与展望

建立ISO14001环境管理体系、开展ISO14001认证工作已在我国全面展开，如何发挥环境保护行政主管部门的作用，对深入推进ISO14001标准认证至关重要。从实施ISO14001标准，促进环境保护工作发展的角度回顾了上海市实施ISO14001环境管理体系标准的历程，探讨了上海市实施 标准的未来发展趋势，并对实施过程中出现的问题提出了对策和建议。     

九江-瑞昌5.7级地震现场房屋安全性鉴定工作的探讨

九江-瑞昌地震虽然震级较小,但震源深度浅,加之本地为历史少震地区,设防水准低,量大面广的非标准砖混和砖木房屋破坏较严重,造成13人死亡和多达20亿的直接经济损失.这充分暴露出我国少震地区城市防御力不足的弊端,经济发展的同时更应注意地震灾害风险的规避.本文介绍了本次地震现场应急工作情况,例举了地震区内不同结构类型房屋在这次地震中的表现和震害特点,并根据本次地震现场房屋安全性鉴定工作的实践和多次地震现场应急工作的经验,对本次地震现场应急工作进行总结.     

Removal of phosphate from wastewater using alkaline residue

Alkaline residue(AR) was found to be an efficient adsorbent for phosphate removal from wastewater. The kinetic and equilibrium of phosphate removal were investigated to evaluate the performance of modified alkaline residue. After treatment by NaOH(AR-NaOH), removal performance was significantly improved, while removal performance was almost completely lost after treatment by HCl(AR-HCl). The kinetics of the removal process by all adsorbents was well characterized by the pseudo second-order model. The Langmuir model exhibited the best correlation for AR-HCl, while AR was effectively described by Freundlich model. Both models were well fitted to AR-NaOH. The maximum adsorption capacities calculated from Langmuir equation were in following manner: AR-NaOH AR AR-HCl. Phosphate removal by alkaline residue was pH dependent process. Mechanisms for phosphate removal mainly involved adsorption and precipitation, varied with equilibrium pH of solution. For AR-HCl, the acid equilibrium pH( 6.0) was unfavorable for the formation of Ca-P precipitate, with adsorption as the key mechanism for phosphate removal. In contrast, for AR and ARNaOH, precipitation was the dominant mechanism for phosphate removal, due to the incrase on pH( 8.0) after phosphate removal. The results of both XRD and SEM analysis confirmed CaHPO4·2H2O formation after phosphate removal by AR and AR-NaOH.     

三聚氰胺化学改性浮萍吸附重金属钍（Ⅳ）研究

采用生物吸附法去除废水中Th(Ⅳ)离子,研究了水生浮萍化学改性后吸附Th(Ⅳ)的行为特性、吸附模型及吸附机理.以浮萍、三聚氰胺和甲醛为原料,通过接枝反应制得三聚氰胺改性浮萍(MELM),能更好的吸附钍离子.结果表明:常温常压下,pH为5.5,吸附剂MELM为0.03 g,Th(Ⅳ)初始浓度为80 mg·L~(-1),反应60 min时,最大吸附率为97.4%,对应吸附量为129.88 mg·g~(-1),吸附量比未经处理的浮萍(最优吸附条件下,吸附量为22.83 mg·g~(-1))吸附量要大.通过Langmuir、Freundlich、Temkin 3种等温吸附模型对数据进行拟合,Langmuir模型能更好的描述吸附剂MELM对Th(Ⅳ)的平衡吸附行为,同时吸附过程能很好的用准二级反应动力学来解释.此外,FTIR实验数据表明,吸附剂MELM表面上氨基、羟基和羰基是主要的作用基团.     

阴极液及底物浓度对AFB-MFC同步废水处理及产电性能影响

为了提高厌氧流化床微生物燃料电池（AFB-MFC）的性能，并为双室MFC寻找价廉、易得、无污染的阴极液，在曝气量16～24 L/h、温度（35±2）℃、回流量10.2 L/h、阴极底边距阴极室内底部17.3 cm、外电阻250 Ω、水力停留时间（HRT）14.0～14.9 h以及进水pH 7.81～8.37下，研究了阴极液及底物浓度对系统产电及废水处理性能的影响。结果表明，使用缓冲溶液、阳极室出水和自来水作阴极液时，自来水的产电性能最佳，阴极液种类不影响系统有机基质的去除。以自来水为阴极液时，阴极液pH及电导率随运行时间增加而增加，COD去除率为80.11%～89.29%，输出电压及功率密度开始随运行时间增加而增加，之后稳定在440～452 mV和48.40～51.08 mW/m²之间。增加底物浓度对COD去除率影响不大，而输出电压及功率密度随底物浓度增加而下降；底物COD浓度由3 307.09 mg/L增至9 520 mg/L时，COD去除率在85.77%～94.44%之间，输出电压及功率密度则分别由449 mV和50.40 mW/m²下降至406 mV和41.21 mW/m²。自来水作阴极液可避免二次污染及阴极液对阳极室微生物的影响，并得到高的产电能力。     

碱熔融法合成NaA和NaX型粉煤灰沸石的品质表征

以粉煤灰为原料采用碱熔融法合成了2种单一沸石矿物种的NaA和NaX型沸石,并对产物的结构、性能和应用指标进行了详细表征.经x射线衍射和IR光谱分析,表明合成产物是无杂晶生成的NaA和NaX型沸石相;在扫描电镜观察下,产物分别具有NaA和NaX型沸石的立方体和八面体晶体骨架结构.DTA分析表明了合成产物中沸石水的存在,且产物热稳定性较好.通过对比,粉煤灰合成的NaA和NaX型沸石的比表面积达到了相应商品沸石的66.9%和83.6%;孔容为41.1%和70.2%;阳离子交换容量(CEC,cation exchange capacity)为82.93%和84.31%.通过比较化学组成表明,大规模应用合成产物不会对环境造成危害.     

RETRACTED ARTICLE: Environmental Impact Assessment of Industrial Structure Change in a Rural Region of China

As the embodiment of human activities, the change of regional industrial structure is an essential driving factor of global environmental change. Consequently, the research on the change of regional industrial structure and associated effects on the environment is one of the key issues of researches on sustainable development, human–environment relationship, and regional response to global environment change. However, compared to the flourish of researches on environmental impact assessment of industrial departments, few studies have been conducted to assess the environmental impact of regional industrial structure. In this study, based on a synthetic analysis of environmental disturbances of different industrial departments, the environmental impact coefficient of industrial department associated with the index of environmental impact of industrial structure was constructed, so as to make a quantitative assessment of environmental impact of the change of regional industrial structure. And the results of the case study in Lijiang City, a rural region of China, have showed that there are two obvious changes of industrial structure in the study area from 1992 to 2003, associated with a continuous decreasing of the index of environmental impact of industrial structure, which indicated a positive environmental effects of the change of regional industrial structure.