Comparative study of the sensitivity to cadmium of two populations of Gambusia affinis from two different sites

This study aims to demonstrate the influence of animals' origin on their sensitivity toward heavy metals. For this purpose, we compared LC(50) of cadmium in two populations of Gambusia affinis captured in two geographically isolated environments in the east of Tunisia; Oued El Gsil in the city of Monastir (S2) and Oued Chenini in the region of Gabes (S1). Although physicochemical parameters of the water (pH, dissolved oxygen and salinity) are similar in the two studied sites, cadmium concentrations in water, sediments and fish tissues from S1 are significantly higher (P < 0.01) than those from S2, 48-h and 96-h LC(50) of the (S1) population are significantly higher than those from S2. In the same way, the offspring of the polluted site (S1) population exhibit 48-h and 96-h LC(50) values much higher than those of the reference site (S2) population. These results show that the population of the Gabes region is more resistant to cadmium than that of the Monastir region and that this resistance could have a genetic basis. These results indicate the influence of the origin of animals that has to be taken into account not only in laboratory toxicity tests, but also in field ecotoxicological studies.     

Levels, distribution, and risk assessment of organochlorines in surficial sediments of the Red Sea coast, Egypt

The analyses of environmentally persistent pollutants like polychlorinated biphenyls (PCBs), hexachlorocyclohexane (HCH) isomers, and dichlorodiphenyltrichloroethane (DDT) and its metabolites in surficial sediment samples collected from 17 locations along with the coast of the Red Sea in Egypt were carried out using gas chromatography–mass spectrometry. Several potential organic contaminants from agricultural (e.g., DDT and its breakdown products, lindane, endrin, dieldrin, and endosulfan) and industrial (PCBs) sources were measured. The levels of 20 organochlorine pesticides (OCPs) and ten PCB congeners in sediment collected from 17 stations along ~1,200 km were investigated. Concentrations of PCBs, HCHs, DDTs, and cyclodienes ranged from 0.40 to 6.17, 0.01 to 0.09, n.d. to 0.46, and 0.08 to 0.90 ppb dry weight. Two statistical programs were applied on the data (principal component analysis, PCA, and cluster analysis, CA), and it was concluded that it is impossible to predict the distribution patterns of the OCPs in a contaminated area. Risk assessment of the organochlorines contaminated in the sediments of the studied area was investigated.     

Biosorption of Direct Yellow 12 from aqueous solution using green alga Ulva lactuca

The potential of commonly available green alga Ulva lactuca was investigated as viable biomaterials for removal of synthetic azo dye (Direct Yellow 12, DY-12) from aqueous solution. The results obtained from the batch experiments revealed that the ability of the U. lactuca to remove DY-12 from its aqueous solution was dependent on the dye concentration, pH, and algal biomass but less dependent on the particle size of the U. lactuca. The equilibrium conditions and kinetics of adsorption were investigated, and the adsorption kinetic was consistent with the pseudo-second-order model (R²=1). The adsorption isotherm followed only the Freundlich model with a correlation coefficient R²=0.99. This study demonstrated that the U. lactuca could be used as an effective biosorbent for the removal of DY-12 from its aqueous solution.     

An assessment of heavy-metal contamination in surface sediments of the Suez Gulf using geoaccumulation indexes and statistical analysis

An assessment of marine pollution due to metals was made in the Suez Gulf based on surface costal sediment collected from 18 locations along the Gulf. The samples were dried and acid-digested, and the metal contents (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) were determined using a flame atomic absorption spectrophotometer (air-acetylene) with deuterium background correction. An evaluation of the heavy-metal pollution status of the Gulf was carried out using enrichment factors (EF) and geo-accumulation Indexes (I_geo). Also, heavy-metal concentrations in Suez Gulf sediments were evaluated using the Effect Range-Low (ERL) and the Effect Range-Median (ERM). The results of a Spearman correlation and factor and cluster analysis of the heavy metals analysed in the collected sediment were discussed. The main source of contamination is offshore oil field and industrial wastes, which arise due to the ineffective and inefficient operation equipments, illegal discharge and lack of supervision, and prosecution of offenders.     

Comparative study of heavy metal distribution in some coastal seaweeds of Alexandria, Egypt

The distribution of Cd, Cu, Fe, Hg, Mn, Ni, Pb, and Zn concentration in five algae species (Enteromorpha intestinalis, Enteromorpha linza, Ulva lactuca, Corallina mediterranea, Pterocladia capillacea) collected from three areas having different types of metal contamination along Alexandria coastal waters (Egypt) were determined by Atomic Absorption Spectrometry. The recovery study was carried out using a Certified Reference Material TORT-2. The obtained heavy metal contents indicate that different species demonstrate various degree of metal accumulation. Enteromorpha intestinalis (green algae) recorded the highest levels of Fe and Mn while Corallina mediterranea (Calcareous red algae) recorded the highest concentration of Pb, Ni, and Cd in the three areas under study. According to the present study, filamentous algae (Enteromorpha intestinalis) showed the ability to concentrate greater amount of trace elements than the foliaceous ones (Enteromorpha linza). In each area, mercury concentration has nearly the same value for all species under study.     

Polychlorinated biphenyls and chlorinated pesticides in mussels from the Egyptian Red Sea coast

The residues of 17 organochlorine pollutants were analyzed in bivalve Brachiodontes sp. collected from 11 different locations in April 2000 along the Egyptian Red Sea coast. The pollutants studied were 10 individual polychlorinated biphenyl (PCB) congeners, alpha,alpha,alpha-hexachlorocyclohexane (HCHs), cyclodienes (heptachlor, heptachlorepoxide, aldrin, dieldrin) and dichlorodiphenyltrichloroethanes (DDTs) (p,p'-DDE, p,p'-DDD and p,p'-DDT). The concentration of total DDTs ranged between 125 and 772 ng/g of wet weight whereas the concentration of the PCBs, HCHs and cyclodienes ranged from 6.7 to 66.4 ng/g; 16.2 to 183.4 ng/g and 8.8 to 221.6 ng/g of wet weight, respectively. The levels are low to moderate in relation to the published data from other coastal areas. The present results indicate low to moderate PCBs and pesticides contamination in the investigated mussels except DDTs.     

Carbonyl compound leaching from polyethylene terephthalate into bottled water under sunlight exposure

Polyethylene terephthalate bottles containing natural spring water were used to study the leaching effect of carbonyl compounds after one year storage under real conditions of exposure. Ultraviolet-B and ultraviolet-A spectra of direct sunlight were acquired during the experiment. Leaching of acetone, acetaldehyde, and formaldehyde reached steady state after 210 days of outdoor storage, with the following concentrations: 434 ± 22, 345 ± 18, and 94 ± 5 µg/L, respectively. The increase due to sunlight exposure in comparison with laboratory storage in the dark was around 10%, 16%, and 36%. The leaching process of all three carbonyl compounds was found to follow the first-order kinetics. Photo-degradation of Polyethylene terephthalate bottles and the appearance of carboxyl end-groups were followed by attenuated total reflectance infrared spectra. After 313 days of storage under direct sunlight, new peaks appeared in the regions of 1770–1920 cm^?1 and 1685–1490 cm^?1. Cations, anions, total dissolved solids, pH, and conductivity were also measured during the storage period. Additionally, microbiological measurements as well as statistical analyses were also carefully discussed.     

Trace metals in fish of economic interest from the west of Alexandria,Egypt

The concentration of some heavy metals (Cd, Cu, Fe, Mn, Ni, Pb, and Zn) in the muscle, liver, and gills in eight fish species, Caranx crysos, Euthynnus alleferatus, Scomberomorus commerson, Sphyraena viridensis, Sargus sargus, Siganus rivulatus, Mugil species, and Sardinella aurita were collected seasonally from the Mediterranean Sea in the region of Alexandria. The highest concentrations of Cd, Cu, Fe, and Zn were measured in liver tissue, while gill tissue yielded the highest concentrations of Mn, Ni, and Pb. Muscle is the organ of poor accumulation factor for all metals under investigation. Concentration of cadmium in muscle in Mugil species exceeds the permissible limit in summer, while Siganus rivulatus exceeds it in the summer and autumn seasons. On the other hand, copper, nickel, lead, and zinc are still much lower than the permissible levels. The metal pollution index (MPI) for metals was studied, revealing that Siganus rivulatus, Mugil species and Sardinella aurita had the highest MPI. Provisional tolerable daily intake (PTDI) indicates that the concentration levels of Cd, Cu, Fe, Mn, Ni, Pb, and Zn in the muscle of all fish species under investigation are much lower than recommended PTDI values, and accordingly there is no risk for the human consumption of these fish species.     

Green energy generation by pressure retarded osmosis: State of the art and technical advancement—review

Pressure-retarded osmosis (PRO) is a method for converting salinity gradients to power by allowing water to flow through a semi-permeable membrane against an applied hydraulic pressure. PRO already has a long history, starting from the middle of the last century, and has rapidly improved in recent years. In this paper, we present a historical development of PRO since its inception: the development of this renewable energy process has gone through several stages, depending on technological developments, worldwide energy demands, and environmental concerns. The technological progress of the process is also studied, as well as its cost viability and environmental impact. Finally, some ideas to further develop the PRO process and mitigate its detrimental effects are discussed.