Use of native mosses as biomonitors of heavy metals and nitrogen deposition in the surroundings of two steel works

A biomonitoring survey using the moss species Hypnum cupressiforme Hedw. was conducted in the surroundings of two steel plants located in the North of Spain. Levels of V, Cr, Ni, Cu, Zn, As, Cd, Hg, Pb and N were determined. Very high concentrations in the areas of study were detected when compared to nearby unaffected regions. Similar trends were observed for all the elements in the differently orientated transects, showing an appreciable influence of the NW prevailing winds of the region in the dispersion of pollutants, as well as a clear decreasing gradient in the concentrations of metals in mosses within a distance of 1500 meters from the facilities. A differentiation between the elements emitted by the chimney as result of the industrial activity (V, Cr, Ni, Cu and As) and those with a high presence in steel slag deposits (Zn, Cd, Hg and Pb) was observed. The range of contamination was also established by means of the Contamination Factor, indicating a category 4 out of 6 categories, which shows the high levels reported in the areas of study. A different dynamic was registered for nitrogen regarding the rest of the heavy metals analysed except for Hg, probably due to the elevated volatility and mobility of both elements, as well as their high persistence in the atmosphere.     

Comparison of vehicle activity and emission inventory between Beijing and Shanghai

Vehicle emission inventory is a critical element for air quality study. This study created systemic methods to establish a vehicle emission inventory in Chinese cities. The methods were used to obtain credible results of vehicle activity in Beijing and Shanghai. On the basis of the vehicle activity data, the International Vehicle Emission model is used to establish vehicle emission inventories. The emissions analysis indicates that 3 t of particulate matter (PM), 199 t of nitrogen oxides (NO(x)), 192 t of volatile organic compounds (VOCs), and 2403 t of carbon monoxide (CO) are emitted from on-road vehicles each day in Beijing, whereas 4 t of PM, 189 t of NO(x), 113 t of VOCs, and 1009 t of CO are emitted in Shanghai. Although common features were found in these two cities (many new passenger cars and a high taxi proportion in the fleet), the emission results are dissimilar because of the different local policy regarding vehicles. The method to quantify vehicle emission on an urban scale can be applied to other Chinese cities. Also, knowing how different policies can lead to diverse emissions is beneficial knowledge for other city governments.     

IVE机动车排放模型应用研究

对IVE模型进行了系统分析和介绍,以北京市为研究对象给出了模型的主要输入参数的确定方法和思路,运用IVE模型对北京市不同车型车队的排放进行计算。结果显示：公交车和卡车的排放因子明显较高,特别是颗粒物排放因子,分别为普通轻型车的14和44倍。北京市机动车的CO、VOC、NOx和PM的平均日排放总量分别为2767.4、182.5、353.8和7.1t。对于CO和VOC,普通轻型车的分担率分别为42.0%和34.7%;对于NOx和PM而言,卡车的贡献率最高,分别达到66.3%和83.0%。此外,比较了IVE模型与MOBILE6模型的方法和计算结果,讨论了IVE模型在我国的主要应用优势。     

应用IVE模型计算上海市机动车污染物排放

为了解上海市机动车污染现状,建立上海市机动车源排放清单,分别选择上海市中心城区、商业区和收入相对较低区域中的主干道、快速道和次干道3种共9条典型道路,开展机动车技术水平参数、比功率(VSP)分布状况、启动状况等测试,并在此基础上将International Vehicle E-mission(IVE)模型本地化.调查结果表明,上海市区实际道路上轻型客车、出租车、公交巴士、卡车和摩托车(包含助动车)分别占道路总车流量的41.0%、30.8%、15.6%、6.9%和5.7%;从技术组成看,约85%的轻型客车和97%的出租车均安装有三元催化装置,约30%的公交巴士和90%的卡车没有达到欧Ⅰ标准;机动车的VSP分布主要集中在-2.9～1.2 kw·t-1.模式计算结果表明,2004年上海市机动车CO、VOC、NOx和PM排放量分别为57.06×104t、7.75×104t、9.20×104t和0.26×104t;20%的高排放车对总排放量的贡献占到25%～45%;启动过程中排放的CO、VOC和PM占总排放量的15%～25%,NOx仅占总排放量的4.5%.     

Air Quality Management in Los Angeles: Perspectives on Past and Future Emission Control Strategies

The 1988 Air Quality Management Plan was approved by the Board of the California South Coast Air Quality Management District in March 1989. The District comprises the counties of Los Angeles, Orange, and Riverside, and the non-desert portion of San Bernardino county. Emissions reductions in the past have lead to significant improvement in air quality despite large increases in growth. However, the District, largely because of continuous growth, currently violates the air quality standards for ozone, carbon monoxide, nitrogen dioxide, and respirable particulate matter (PM₁₀). Based upon the AQMP, reduction of approximately 80 percent in emissions of oxides of nitrogen and volatile organic compounds is required to bring the District into compliance with all air quality standards in the next twenty years.

Achieving compliance will necessitate the use of advanced technologies, as well as some changes in lifestyle and management practices. Advanced technologies, including the use of electric vehicles powered by batteries or fuel cells, the use of cleaner burning fuels and advanced combustion modifications, and treatment of surface coatings and solvents are included in the AQMP. The Technology Advancement Office in the District was created to work with industry, universities, research institutes, and other local, state and federal agencies to identify, evaluate, and promote low emitting fuels and technologies. In addition to electricity, fuels burning cleaner than conventional gasoline or diesel are being tested to obtain emissions and durability data so that rational choices can be made for the future. Compressed natural gas, methanol and liquefied petroleum gas are considered to be cleaner burning fuels for current applications. Ethanol, butane, and various oxygenated blends are being evaluated, and the broader application of solar energy and hydrogen are being investigated.

The impact of various cleaner burning fuels on air quality is being addressed. To date, methanol is the only fuel for which results are available. These results indicate that methanol use in vehicles—with control of formaldehyde emissions below 15 mg/mile for light-duty vehicles—can provide air quality benefits for all criteria pollutants and certain air toxics. These benefits are greater for M₁₀₀ than M₈₅.

Several District advanced technology programs are described, including a reduction in emissions from paints and coatings, and the demonstration of electric vehicles.     

Real-world vehicle emission factors in Chinese metropolis city--Beijing

The dynamometer tests with different driving cycles and the real-world tests are presented. Results indicated the pollutants emission factors and fuel consumption factor with ECE15 EUDC driving cycle usually take the lowest value and with real wodd driving cycle occur the highest value, and different driving cycles will lead to significantly different vehicle emission factors with the same vehicle. Relative to the ECE15 EUDC driving cycle, the increasing rate of pollutant emission factors of CO, NOx and HC are - 0.42--2.99, - 0.32--0.81 and - 0.11--11 with FTP75 testing, 0.11--1.29, - 0.77--0.64 and 0.47--10.50 with Beijing 1997 testing and 0.25--1.83, 0.09--0.75 and - 0.58--1.50 with real wodd testing. Compared to the carburetor vehicles, the retrofit and MPI TWC vehicles‘ pollution emission factors decrease with different degree. The retrofit vehicle (Santana) will reduce 4.44%--58.44% CO, - 4.95%--36.79% NOx, -32.32%--33.89% HC, and -9.39%--14.29% fuel consumption, and especially that the MPI TWC vehicle will decrease CO by 82.48%--91.76%, NOx by 44.87%--92.79%, HC by 90.00%--93.89% and fuel consumption by 5.44%--10.55%. Vehicles can cause pollution at a very high rate when operated in high power modes; however, they may not often operate in these high power modes. In analyzing vehicle emissions, it describes the fraction of time that vehicles operate in various power modes. In Beijing, vehicles spend 90% of their operation in low power modes or decelerating.     

A vehicle emissions system using a car simulator and a geographical information system: Part 1--System description and testing

A methodology for estimating vehicular emissions comprising a car simulator, a basic traffic model, and a geographical information system is capable of estimating vehicle emissions with high time and space resolution. Because of the extent of the work conducted, this article comprises two sections: In Part 1 of this work, we describe the system and its components and use examples for testing it. In Part 2 we will study in more detail the emissions of the sample fleet using the system and will make comparisons with another emission model. The experimental data for the car simulator is obtained using on-board measuring equipment and laboratory Fourier transform IR (FTIR) measurements with a dynamometer following typical driving cycles. The car simulator uses this data to generate emission factors every second. These emission factors, together with information on car activity and velocity profiles of highways and residential and arterial roads in Mexico City in conjunction with a basic traffic model, provide emissions per second of a sample fleet. A geographical information system is used to localize these road emissions.     

The development and application of remote sensing to monitor sand dune habitats

Sand dunes are complex systems that contain several habitats, often as mosaics or transitions between types. Several of these habitats are afforded protection under European Legislation and in the UK nationally within Special Areas of Conservation (SAC) and Sites of Special Scientific Interest (SSSI). Natural England has a statutory duty to report to Europe on the conservation status and condition of sand dunes; and is required to report to the UK Government on designated sites. To achieve this we have sought ways of capturing, analysing and interpreting data on the extent and location of sand dune habitats. This requires an ability to be able to obtain data over large areas of coastline in an efficient way. Natural England and Environment Agency Geomatics have worked collaboratively for over 16 years, sharing data and ecological knowledge. In 2012 work started to evaluate the use of remote sensing to map UK BAP and Annex I sand dune habitats. A methodology has now been developed and tested to map sand dune habitats. The key objective was to provide an operational tool that will help to map these habitats and understand change on sites around England. This has been achieved through analysis of LIDAR and Compact Airborne Spectrographic Imager (CASI) data using Object Orientated Image Analysis. Quality Control (QC) and accuracy assessments have shown this approach to be successful and 11 sites have been mapped to date. These techniques are providing a new approach to monitoring change in coastal vegetation communities and informing management of protected sites.