Biodiversity of brackish water amphipods (crustacean) in two estuaries, southeast coast of India

The present study about the gammarid amphipods of Vellar and Uppanar estuaries was performed during two seasons (pre-monsoon and post-monsoon, 2005–2006), respectively, in nine habitats: five in the Vellar estuary and four in the Uppanar estuary. Amphipod samples were collected from sediments, oyster beds, seaweeds, sea grass, and mangroves. A total of 29 species of gammarid amphipods were collected in each area. The surface water temperature ranged from 16°C to 26°C, the salinity from 20 to 32 psu, and the pH between 7.5 and 8.3. Dissolved oxygen ranged from 5.3 to 7.8 ml/l. The maximum abundance of amphipods was observed during the pre-monsoon (July to September) in Vellar mangrove, and it was minimum during the pre-monsoon in Uppanar sea grass. It was found that several physicochemical factors, such as salinity, temperature, dissolved oxygen, pH, and the substrate have a marked effect on the distribution and the relative abundance of amphipods. The ranges of species diversity, richness, dominance, and evenness in the Vellar and Uppanar estuaries were 1.58–4.15, 1.82–5.29, 0–0.11, and 0.96–1, respectively. Using multivariate analyses, in each estuary, it was possible to identify different communities of amphipod species according to their habitats.     

Development of regenerative dye impregnated mesoporous silica materials for assessing exposure to ammonia

The mesostructured materials MCM-41 and SBA-15 were studied as possible supports of bromocresol green (BG) dye impregnation for the ammonia gas detection because of their large surface area, high regenerative property, and high thermal stability. X-ray diffraction, transmission electron microscopy, scanning electron microscope, and N2 adsorption analysis were used to characterize the prepared materials. These materials could sense ammonia via visible color change from yellowish-orange to blue color. The color change process of the nanostructured materials was fully reversible during 10 cyclic tests. The results indicated that the ammonia absorption responses of the two nanostructured materials were both very sensitive, and high linear correlation and high precision were achieved. As the gaseous ammonia concentrations were 50 and 5 ppmv, the response times for the SBA-15/BG were only 1 and 5 min, respectively. Moreover the BG dye-impregnated SBA-15 was less affected by the variation in the relative humidity. It also had faster response for the detection of NH3, as well as lower manufacturing price as compared to that of the dye-impregnated MCM-41. Such feature enables SBA-15/BG to be a very promising material for the detection of ammonia gas.     

Probabilistic assessment of phenophase-wise agricultural drought risk under different sowing windows: a case study with rainfed soybean

A new methodology for crop-growth stage-specific assessment of agricultural drought risk under a variable sowing window is proposed for the soybean crop. It encompasses three drought indices, which include Crop-Specific Drought Index (CSDI), Vegetation Condition Index (VCI), and Standardized Precipitation Evapotranspiration Index (SPEI). The unique features of crop-growth stage-specific nature and spatial and multi-scalar coverage provide a comprehensive assessment of agricultural drought risk. This study was conducted in 10 major soybean-growing districts of Madhya Pradesh state of India. These areas contribute about 60% of the total soybean production for the country. The phenophase most vulnerable to agricultural drought was identified (germination and flowering in our case) for each district across four sowing windows. The agricultural drought risk was quantified at various severity levels (moderate, severe, and very severe) for each growth stage and sowing window. Validation of the proposed new methodology also yielded results with a high correlation coefficient between percent probability of agricultural drought risk and yield risk (r?=?0.92). Assessment by proximity matrix yielded a similar statistic. Expectations for the proposed methodology are better mitigation-oriented management and improved crop contingency plans for planners and decision makers.     

Influence of metal resistant-plant growth-promoting bacteria on the growth of Ricinus communis in soil contaminated with heavy metals

The metal resistant-plant growth-promoting bacterial (PGPB) strains PsM6 and PjM15 isolated from a serpentine soil were characterized as Pseudomonas sp. and Pseudomonas jessenii, respectively, on the basis of their morphological, physiological, biochemical characteristics and 16S rDNA sequences. Assessment of plant growth-promoting parameters revealed the intrinsic ability of the strains for the utilization of 1-aminocyclopropane-1-carboxylic acid as the sole N source, solubilization of insoluble phosphate and production of indole-3-acetic acid (IAA). Further, a pot experiment was conducted to elucidate the effects of inoculating metal resistant PGPB on the plant growth and the uptake of Ni, Cu and Zn by Ricinus communis. Inoculation of Pseudomonas sp. PsM6 or P. jessenii PjM15 increased the shoot and root biomass of R. communis grown in non-contaminated and contaminated soil. However, the maximum biomass was observed in the plants inoculated with strain PjM15. This effect can be attributed to the solubilization of phosphate and production of IAA. Inoculation of Pseudomonas sp. PsM6 and PjM15 did not greatly alter the organ metal concentrations except Zn which concentration was higher in root, stem and leaf of inoculated plants. The results of metal extraction with PGPB strains showed that PsM6 was more efficient at solubilizing Zn than PjM15, and that PjM15 was better at solubilising Ni and Cu than PsM6. Owing to its wide action spectrum, the metal resistant PGPB could serve as an effective metal sequestering and growth-promoting bioinoculant for plants in metal-stressed soil. The present study has provided a new insight into the phytoremediation of metal-contaminated soil.     

Infectivity and efficacy of Glomus aggregatum and growth response of Cajanus cajan (L.) Millsp. in flyash amended sterile soil

In the present investigation a pot culture experiment was conducted using sterile, phosphorus deficient soil to study the effect of flyash at 3 different concentrations (10g, 20g and 30g flyash/kg soil) on the infectivity and effectiveness of VAM fungus Glomus aggregatum in pigeonpea (Cajanus cajan (L.) Millsp.) cv Maruti. The flyash amendment in soil at all the 3 different concentrations was found to affect significantly the intensity of VAM fungal colonization inside the plant roots and also suppressed the formation of VAM fungal structure (vesicles and arbuscules) completely at higher concentration (30g flyash/kg soil). The response of the pigeonpea plants, as judged by their higher and dry weight, under the influence of flyash amendment in VAM fungus infested soils was found to be considerably less (though not significant enough) when compared to the control plants (without flyash) that have otherwise shown significant increase in growth over the plants without Glomus aggregatum inoculation. However, flyash amendment without VAM inoculation was also found to enhance the growth of plants as compared to control plants (without flyash and VAM inoculum).     

Real-world vehicle emissions: A summary of the 15th coordinating research council on-road vehicle emissions workshop

The Coordinating Research Council held its 15th workshop in April 2005, with nearly 90 presentations describing the most recent mobile source-related emissions research. In this paper, the authors summarize the presentations from researchers who are engaged in improving our understanding of the contribution of mobile sources to air quality. Participants in the workshop discussed emission models and emission inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles (with an emphasis in this workshop on particle emissions), effects of fuels on emissions, evaluation of in-use emissions control programs, and efforts to improve our capabilities in performing on-board emissions measurements, as well as topics for future research.     

Bioremediation of HCH-contaminated soil: elimination of inhibitory effects of the insecticide on radish and green gram seed germination

The effects of technical grade hexachlorocyclohexane (tech-HCH) on the germination of different seeds were tested. Two types of seeds, radish and green gram showed marked reduction in germination percentage and seeding vigour index. The abnormalities and reduction in germination increased with increasing concentration of tech-HCH. At 100 microg HCH level the germination of radish and green gram seeds was inhibited almost completely on moist filter paper and soil. Protease and amylase activities were reduced in seeds grown in soil spiked with tech-HCH. Bioremediation of HCH-spiked soils with a HCH-degrading microbial consortium helped in eliminating the toxic effects of tech-HCH towards seed germination. The degradation of 25 microg tech-HCH g(-1) soil was complete by 120 h. The seed germination and the activities of the assayed enzymes, amylase and protease, were same as before or better in bioremediated soils.     

Comparative analysis for the production of fatty acid alkyl esterase using whole cell biocatalyst and purified enzyme from Rhizopus oryzae on waste cooking oil (sunflower oil)

The petroleum fuel is nearing the line of extinction. Recent research and technology have provided promising outcomes to rely on biodiesel as the alternative and conventional source of fuel. The use of renewable source - vegetable oil constitutes the main stream of research. In this preliminary study, Waste Cooking Oil (WCO) was used as the substrate for biodiesel production. Lipase enzyme producing fungi Rhizopus oryzae 262 and commercially available pure lipase enzyme were used for comparative study in the production of Fatty Acid Alkyl Esters (FAAE). The whole cell (RO 262) and pure lipase enzyme (PE) were immobilized using calcium alginate beads. Calcium alginate was prepared by optimizing with different molar ratios of calcium chloride and different per cent sodium alginate. Entrapment immobilization was done for whole cell biocatalyst (WCB). PE was also immobilized by entrapment for the transesterification reaction. Seven different solvents - methanol, ethanol, n-propanol, n-butanol, iso-propanol, iso-butanol and iso-amyl alcohol were used as the acyl acceptors. The reaction parameters like temperature (30°C), molar ratio (1:3 - oil:solvent), reaction time (24 h), and amount of enzyme (10% mass ratio to oil) were also optimized for methanol alone. The same parameters were adopted for the other acyl acceptors too. Among the different acyl acceptors - methanol, whose reaction parameters were optimized showed maximum conversion of triglycerides to FAAE-94% with PE and 84% with WCB. On the whole, PE showed better catalytic converting ability with all the acyl acceptor compared to WCB. Gas chromatography analysis (GC) was done to determine the fatty acid composition of WCO (sunflower oil) and FAAE production with different acyl acceptors.