Application of polyamide thin-film composite layered on polysulfone-GO/TiO2 mixed matrix membranes for removal of nitrotoluene derivatives from petrochemical wastewaters

Release of harmful organic intermediates or byproducts during the manufacture of petrochemical compounds is a serious problem in petrochemical plants. In this work, polysulfone membranes blended with GO/TiO₂ nanocomposite were synthesized by phase inversion method and coated with a polyamide layer formed by interfacial polymerization to prepare a thin-film composite (TFC) sample. Analysis and characterization of the sample were carried out by XRD, FE-SEM, BET, FTIR/ATR, AFM, TGA, and zeta potential. Results indicated that incorporation of GO/TiO₂ into the membrane structure enhanced porosity, surface roughness, and macrovoid formation along the cross-section of the sublayer and permeability of the membrane. The TFC membranes were applied to remove mononitrotoluene (MNT) and dinitrotoluene (DNT) as the basic intermediates of toluene diisocyanate (TDI). The membranes demonstrated high efficiency (>?90%) for the removal of MNT and DNT according to the charge exclusion mechanism and Donnan effect. Application of the TFC membrane for treatment of wastewater in the TDI plant showed that the removal of pollutants is variable in the range of 45–65% and 53–69% for the membrane with the highest flux and highest rejection in different transmembrane pressure, respectively.

     

Preconcentration of samarium with modified yeast cells for its determination by atomic emission spectroscopy

A chelating-modified biosorbent is produced by coupling of a dye, procion red, to yeast cells. The resulting modified cells have been characterized by Fourier transform infrared, elemental analysis and thermogravimetric analysis and studied for preconcentration and determination of trace Sm(III). The optimum pH value for sorption of the samarium ions is 6.2. The sorption capacity of functionalized modified yeast cells is 7.2 mg g^?1. Recovery was 99% when Sm(III) was eluted with an aqueous solution of 0.1 mol L^?1 ethylenediaminetetraacetic acid. Scatchard analysis suggested that binding sites were homogeneous. The equilibrium data were analyzed using Langmuir, Freundlich, Temkin, and Redlich–Peterson isotherm models, and the respective constants were determined as 1.0 (L mg^?1), 2.9 [(mg g^?1) (L mg^?1)^1/n], 2.4 × 10⁸ (L g^?1), and 30 (dm³ g^?1) at 20 °C. The method was applied for an Sm(III)-containing sample of ceramic industry effluent.     

Preconcentration of tin in environmental and biological samples by ion exchange using modified Amberlite XAD-2

Utilization of Amberlite XAD-2 surface modified by covalent immobilization of brilliant green through an azo spacer for adsorptive enrichment of Sn(II) from environmental and biological samples was highlighted. The resulting resin was characterized by Fourier transform infrared spectroscopy, elemental analysis, thermogravimetric analysis, and scanning electron microscopy. The resin retained Sn(II) ions at an optimum pH of 9.5 with a sorption capacity of 40 mg g^?1. The modified sorbent could be reused for 10 cycles without significant changes in sorption capacity. The recovery of Sn(II) was 98% when eluted with 0.1 mol L^?1 ethylenediaminetetraacetic acid. Scatchard analysis revealed that binding sites in the modified resin were homogeneous. The equilibrium adsorption data were analyzed using the Langmuir, Freundlich, Temkin, and Redlich–Peterson isotherm models. The method was applied with satisfactory results for determination of Sn(II) ions in human plasma and sea water.     

Temperature-responsive graphene oxide/N-isopropylacrylamide/2-allylphenol nanocomposite for the removal of phenol and 2,4-dichlorophenol from aqueous solution

In this study, a novel thermo-responsive polymer was synthesized with efficient grafting of N-isopropylacrylamide as a thermosensitive polymer onto the graphene oxide surface for the efficient removal of phenol and 2,4-dichlorophenol from aqueous solutions. The synthesized polymer was conjugated with 2-allylphenol. Phenol and 2,4-dichlorophenol were monitored by ultra-performance liquid chromatography system equipped with a photodiode array detector. The nanoadsorbent was characterized by different techniques. The nanoadsorbent revealed high adsorption capacity where the removal percentages of 91 and 99% were found under optimal conditions for phenol and 2,4-dichlorophenol, respectively (for phenol; adsorbent dosage = 0.005 g, pH = 8, temperature= 25 °C, contact time = 60 min; for 2,4-dichlorophenol; adsorbent dosage = 0.005 g, pH = 5, temperature = 25 °C, contact time = 10 min). Adsorption of phenol and 2,4-dichlorophenol onto nanoadsorbent followed pseudo-second-order kinetic and Langmuir isotherm models, respectively. The values of ΔG (average value = ? 11.39 kJ mol^?1 for phenol and 13.42 kJ mol^?1 for 2,4-dichlorophenol), ΔH (? 431.72 J mol^?1 for phenol and ? 15,721.8 J mol^?1 for 2,4-dichlorophenol), and ΔS (35.39 J mol^?1 K^?1 for phenol and ? 7.40 J mol^?1 K^?1 for 2,4-dichlorophenol) confirmed spontaneous and exothermic adsorption. The reusability study indicated that the adsorbent can be reused in the wastewater treatment application. Thermosensitive nanoadsorbent could be used as a low-cost and efficient sorbent for phenol and 2,4-dichlorophenol removal from wastewater samples.

     

Fabrication of a pH-Responsive Magnetic Nanocarrier Based on Carboxymethyl Cellulose-Aminated Graphene Oxide for Loading and In-Vitro Release of Curcumin

Journal of Polymers and the Environment - In this study, a pH-responsive magnetic drug delivery system was prepared by cross-linking of Cofe2O4/graphene oxide to carboxymethyl cellulose...     

Quantitative analysis and sorption of cadmium in environmental samples with a functionalized synthetic polymer

Quantitative analysis of cadmium in environmental samples was achieved with a polymeric sorbent synthesized by copolymerization of N,N-dimethylacrylamide and allyl glycidyl ether/iminodiacetic acid as chelating monomers with N,N′-methylenebisacrylamide as cross-linker. The polymer was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, and scanning electron microscopy. The sorption capacity of the functionalized sorbent was 70 mg g^?1. The equilibrium sorption data of Cd(II) on polymeric sorbent were analyzed using Langmuir, Freundlich, Temkin, and Redlich–Peterson models. Based on equilibrium adsorption data, the constants at pH 4.2 and 20 °C were determined for the first three as 0.33 (L mg^?1), 17.5 (mg g^?1) (L mg^?1)^1/n, and 12.9 (J mol^?1). Recovery of 94% of the metal ion was obtained with 0.5 mol L^?1 nitric acid as an eluting agent.