Release of harmful organic intermediates or byproducts during the manufacture of petrochemical compounds is a serious problem in petrochemical plants. In this work, polysulfone membranes blended with GO/TiO2 nanocomposite were synthesized by phase inversion method and coated with a polyamide layer formed by interfacial polymerization to prepare a thin-film composite (TFC) sample. Analysis and characterization of the sample were carried out by XRD, FE-SEM, BET, FTIR/ATR, AFM, TGA, and zeta potential. Results indicated that incorporation of GO/TiO2 into the membrane structure enhanced porosity, surface roughness, and macrovoid formation along the cross-section of the sublayer and permeability of the membrane. The TFC membranes were applied to remove mononitrotoluene (MNT) and dinitrotoluene (DNT) as the basic intermediates of toluene diisocyanate (TDI). The membranes demonstrated high efficiency (>?90%) for the removal of MNT and DNT according to the charge exclusion mechanism and Donnan effect. Application of the TFC membrane for treatment of wastewater in the TDI plant showed that the removal of pollutants is variable in the range of 45–65% and 53–69% for the membrane with the highest flux and highest rejection in different transmembrane pressure, respectively.
相似文献In this study, a novel thermo-responsive polymer was synthesized with efficient grafting of N-isopropylacrylamide as a thermosensitive polymer onto the graphene oxide surface for the efficient removal of phenol and 2,4-dichlorophenol from aqueous solutions. The synthesized polymer was conjugated with 2-allylphenol. Phenol and 2,4-dichlorophenol were monitored by ultra-performance liquid chromatography system equipped with a photodiode array detector. The nanoadsorbent was characterized by different techniques. The nanoadsorbent revealed high adsorption capacity where the removal percentages of 91 and 99% were found under optimal conditions for phenol and 2,4-dichlorophenol, respectively (for phenol; adsorbent dosage = 0.005 g, pH = 8, temperature= 25 °C, contact time = 60 min; for 2,4-dichlorophenol; adsorbent dosage = 0.005 g, pH = 5, temperature = 25 °C, contact time = 10 min). Adsorption of phenol and 2,4-dichlorophenol onto nanoadsorbent followed pseudo-second-order kinetic and Langmuir isotherm models, respectively. The values of ΔG (average value = ? 11.39 kJ mol?1 for phenol and 13.42 kJ mol?1 for 2,4-dichlorophenol), ΔH (? 431.72 J mol?1 for phenol and ? 15,721.8 J mol?1 for 2,4-dichlorophenol), and ΔS (35.39 J mol?1 K?1 for phenol and ? 7.40 J mol?1 K?1 for 2,4-dichlorophenol) confirmed spontaneous and exothermic adsorption. The reusability study indicated that the adsorbent can be reused in the wastewater treatment application. Thermosensitive nanoadsorbent could be used as a low-cost and efficient sorbent for phenol and 2,4-dichlorophenol removal from wastewater samples.
相似文献