Impact of posture and upper-limb muscle activity on grip strength

Purpose. The current research was carried out to determine grip strength (GS) with change in posture and upper-limb muscle activity of manual workers and investigate the impacts of these changes. Methods. For the current research, 120 male and 80 female participants were selected and GS was assessed using a digital hand grip dynamometer in various conditions. Results. The outcomes showed that male participants had higher GS as compared to female participants. Maximum GS was found in a standing posture with the fixed forward shoulder at 45°, elbow at 90° and a neutral position of the wrist and forearm for all participants. Conclusions. Higher values of GS were attained in standing postures which may result in attainment of higher performance levels by the workers. The outcomes justify the importance of correct postures during manual work in industries employing traditional methods.     

Nanocarriers for drug delivery applications

Environmental Chemistry Letters - Nanobiotechnology research has recently provided numerous basic and applied advances in the health sector. Nanocarriers have been developed for efficient drug...     

High-resolution modeling and evaluation of ozone air quality of Osaka using an MM5-CMAQ system

High-resolution modeling approach is increasingly being considered as a necessary step for improving the monitoring and predictions of regional air quality.This is especially true for highly urbanized region with complex terrain and land-use.This study uses Community Multiscale Air Quality (CMAQ) model coupled with MM5 mesoscale model for a comprehensive analysis to assess the suitability of such high-resolution modeling system in predicting ozone air quality in the complex terrains of Osaka,Japan.The 1-km and 3-km grid domains were nested inside a 9-km domain and the domain with 1-km grid covered the Osaka region.High-resolution Grid Point Value-Mesoscale Model μgPV-MSM) data were used after suitable validation.The simulated ozone concentrations were validated and evaluated using statistical metrics using performance criteria set for ozone.Daily maxima of ozone were found better simulated by the 1-km grid domain than the coarser 9-km and 3-km domains,with the maximum improvement in the mean absolute gross error about 3 ppbv.In addition,1-km grid results fared better than other grids at most of the observation stations that showed noticeable differences in gross error as well as correlation.These results amply justify the use of the integrated high-resolution MM5-CMAQ modeling system in the highly urbanized region,such as the Osaka region,which has complex terrain and land-use.     

High-resolution modeling and evaluation of ozone air quality of Osaka using MM5-CMAQ system

High-resolution modeling approach is increasingly being considered as a necessary step for improving the monitoring and predictions of regional air quality. This is especially true for highly urbanized region with complex terrain and land-use. This study uses Community Multiscale Air Quality (CMAQ) model coupled with MM5 mesoscale model for a comprehensive analysis to assess the suitability of such high-resolution modeling system in predicting ozone air quality in the complex terrains of Osaka, Japan. The 1-km and 3-km grid domains were nested inside a 9-km domain and the domain with 1-km grid covered the Osaka region. High-resolution Grid Point Value-Mesoscale Model (GPV-MSM) data were used after suitable validation. The simulated ozone concentrations were validated and evaluated using statistical metrics using performance criteria set for ozone. Daily maxima of ozone were found better simulated by the 1-km grid domain than the coarser 9-km and 3-km domains, with the maximum improvement in the mean absolute gross error about 3 ppbv. In addition, 1-km grid results fared better than other grids at most of the observation stations that showed noticeable di erences in gross error as well as correlation. These results amply justify the use of the integrated high-resolution MM5-CMAQ modeling system in the highly urbanized region, such as the Osaka region, which has complex terrain and land-use.     

Effects of molecular weight and concentration of carboxymethyl cellulose on morphology of hydroxyapatite nanoparticles as prepared with one-step wet chemical method

Nano-sized apatite particles (nAP) synthesized with carboxymethyl cellulose (CMC) have shown great application potentials in in situ heavy metal remediation. However, differences in CMC’s properties effects on the size of nAP produced are not well understood. In this paper, two types of CMC, with respective molecular weights (MW) of ～120000 and ～240000 Dalton or respective polymerization degrees of 500 (CMC-500) and 1050 (CMC-1050), were studied in a concentration range of 0.05%–0.5% (w/w) for nAP synthesis. Morphology of the particles was characterized with transmission electron microscopy (TEM). Results showed that 0.05% CMC-500 solution gave an average particle size of 148.7±134.9 nm, 0.25% CMC-500 solution produced particles of 21.8±20.4 nm, and, 0.5% CMC-500 solution contained particles of 15.8±7.7 nm. In comparison, 0.05% CMC-1050 solution produced nanoparticles of 6.8±3.2 nm, 0.25% CMC-1050 produced smaller nAP of 4.3±3.2 nm, and 0.5% CMC-1050 synthesized the smallest nanoparticles in this study, with an average diameter of 3.0±2.1 nm. Chemical composition of the products was identified with X-ray diffraction (XRD) as pure hydroxyapatite. Interactions between nAP and CMC were discussed with help of attenuated total reflection Fourier transform infrared (ATRFTIR) spectroscopic data. This study showed that CMC at higher concentration as well as higher MW facilitated to produce finer nanoparticles, showing that nAP size could be manipulated by selecting appropriate CMC MW and/or applying appropriate CMC concentration.     

Concentrations of Hchs and Ddts in the Tissues of River Dolphins,Platanista Gangetica,From the River Ganges,India

Abstract

Concentrations of HCH and DDT organochlorine insecticide residues were measured in blubber, muscle and oil samples from three specimens of river dolphins, Platanista gangetica, from the River Ganges, India. Concentrations of HCH and DDT ranged from 94 to 289 ng g^?1 and from 1324 to 9388 ng g^?1 on wet wt. basis respectively. Comparisons are made with other aquatic mammals and other studies on river dolphins. P. gangetica appears to exhibit similar patterns of accumulation with age and with ß-HCH and p-p′-DDE being accumulated to higher levels than other HCH isomers and parent DDT and its other metabolites, respectively. These organochlorines may pose a health risk to river dolphin populations that are already showing evidence of environmental stress. Further studies are recommended.     

Mapping the organic carbon stocks of surface soils using local spatial interpolator

The largest uncertainties are associated with estimating the soil organic carbon (SOC) stock because of natural soil variability and data scarcity. Thus, a local spatial geostatistical hybrid approach, the geographically weighted regression kriging (GWRK), was used in the present study to overcome some of these uncertainties. This study was designed to estimate the SOC stock (kg C m(-2)) for the surface 0 to 15 cm depth using the state of Pennsylvania as the study region. A total of 920 soil profiles were extracted from the National Soil Survey Center database and were divided into calibration (80%) and validation (20%) periods. Some soil parameters that include clay content, bulk density (ρ(b)), total nitrogen (TN) content, pH, Ca(2+), Na(+), extractable acidity (EXACID), and cation exchange capacity (CEC) were used as covariates for estimating the SOC stock. These covariates exhibited spatial autocorrelation (Moran's Index, I = 0.62 to 0.89). Further, residuals of geographically weighted regression were spatially autocorrelated, and hence support the use of the GWRK approach. Validation results concluded that the performance of the GWRK approach was the best with the lowest values of root mean square error, mean estimation error and mean absolute estimation error. The estimated SOC stock for the surface 0 to 15 cm depth ranged from 1.41 to 3.94 kg m(-2). Results from this study show that the GWRK captures spatial dependent relationships, and addresses spatial non-stationarity issues, hence this approach improves the estimations of SOC stock.     

Recent advances in nanomaterial developments for efficient removal of Hg(II) from water

Environmental Science and Pollution Research - “Water” contamination by mercury Hg(II) has become the biggest concern due to its severe toxicities on public health. There are different...     

Nitrate contamination in water resources,human health risks and its remediation through adsorption: a focused review

The level of nitrate in water has been increasing considerably all around the world due to vast application of inorganic nitrogen fertiliser and animal manure. Because of nitrate’s high solubility in water, human beings are getting exposed to it mainly through various routes including water, food etc. Various regulations have been set for nitrate (45–50 mgNO₃^?/L) in drinking water to protect health of the infants from the methemoglobinemia, birth defects, thyroid disease, risk of specific cancers, i.e. colorectal, breast and bladder cancer caused due to nitrate poisoning. Different methods like ion exchange, adsorption, biological denitrification etc. have the ability to eliminate the nitrate from the aqueous medium. However, adsorption process got preference over the other approaches because of its simple design and satisfactory results especially with surface modified adsorbents or with mineral-based adsorbents. Different types of adsorbents have been used for this purpose; however, adsorbents derived from the biomass wastes have great adsorption capacities for nitrate such as tea waste-based adsorbents (136.43 mg/g), carbon nanotube (142.86 mg/g), chitosan beads (104 mg/g) and cetyltrimethylammonium bromide modified rice husk (278 mg/g). Therefore, a thorough literature survey has been carried out to formulate this review paper to understand various sources of nitrate pollution, route of exposure to the human beings, ill effects along with discussing the key developments as well as the new advancements reported in procuring low-cost efficient adsorbents for water purification.